BeRex BT013 1500-4000 MHz Medium Power Amplifier Device Features 45.0dBm Output IP3 at 13dBm/tone at 1900MHz 15dB Gain at 1900MHz 27.5dBm P1dB at 1900MHz Lead-free/Green/RoHS Compliant SOT89 Package Patented Over Voltage Protection Circuit Application: commercial, space, military wireless system Electrical Specifications (Ta = 25C, Vs = 5.0V) Parameters Test Conditions Frequency Range Gain S11 S22 OIP3 P1dB IS-95 CH Power @-45dBc ACPR WCDMA CH Power @-45dBc ACLR NF 1900MHz 2140MHz 2400MHz 3500MHz 1900MHz 2140MHz 2400MHz 3500MHz 1900MHz 2140MHz 2400MHz 3500MHz 1900MHz 2140MHz 2400MHz 3500MHz 1900MHz 2140MHz 2400MHz 3500MHz Min 1500 14.0 13.0 12.2 9.7 42 42 40 37 26.5 26.2 26.0 25.0 Typ Max Unit 4000 MHz 15.0 14.0 13.2 10.7 -17.5 -12.0* -13.0 -26.0 -12.5 -12.0* -13.0 -25.0 45 45 43 40 27.5 27.2 27.0 26.0 dB dB dB dBm dBm 1900MHz 21.0 dBm 2140MHz 2400MHz 1900MHz 2140MHz 2400MHz Vc = 5.0V 19.5 18.5 dBm 6.8 dB Ic Vc Thermal Resistance Rth * There are trade offs between IRL/ORL and S21/P1/OIP3. 115 135 5.0 50 155 mA V C/W Test conditions unless otherwise noted. 1. T = 25C, Vdevice = 5.0V, 50 ohm system. 2. OIP3 measured with two tones at an output power of 13dBm separated by 1MHz. http: //www.berex.com BeRex BT013 Absolute Maximum Ratings Parameters Operating Case temperature Storage Temperature Junction Temperature Supply Voltage Input RF Power Rating -40 to +85C -55 to +155C +220C 7V 23dBm Operation of this device above any of these parameters may result in permanent damage. [Generic SOT89 Evaluation Board] [I-V Characteristics] *Dielectric constant is 4.2 *RF pattern width 52mil *31mil thick FR4 PCB Current drop in between 5~6V is due to patented protection circuit. http: //www.berex.com BeRex BT013 Typical Device Data S-parameters (Vc=5V, Ic=135mA, T=25C) S-Parameter (5V/135mA) Freq [MHz] S11 [Mag] S11 [Ang] S21 [Mag] S21 [Ang] S12 [Mag] S12 [Ang] S22 [Mag] S22 [Ang] 100 500 1000 1500 2000 2500 3000 3500 4000 -0.046 -0.952 -1.111 -0.928 -1.240 -1.390 -1.669 -1.989 -2.281 -30.149 -116.77 -162.01 157.99 129.31 104.6 82.694 60.455 37.752 2.219 6.737 13.26 10.718 9.181 8.334 6.491 6.124 5.024 -128.4 -174.18 161.56 121.35 101.55 81.201 66.725 51.795 33.795 -41.958 -32.703 -32.513 -30.171 -28.599 -26.76 -26.706 -25.792 -24.653 66.107 25.318 76.255 46.516 42.527 37.808 32.623 26.141 20.698 -3.497 -3.457 -7.557 -7.780 -7.262 -7.180 -7.38 -7.336 -6.823 165.97 162.64 117.5 127.17 116.25 97.537 74.648 50.666 32.131 http: //www.berex.com BeRex BT013 WCDMA 6FA 2140 -55dBc WCDMA 6FA 2140 -60dBc http: //www.berex.com BeRex BT013 ACLR http: //www.berex.com BeRex BT013 Application Circuit: 1900 MHz Schematic Diagram BOM Vcc L1 C1 C2 C3 Tolerance C1 100pF ±5% C2 1000pF ±5% C3 10uF ±15% C4 22pF ±5% C5 22pF ±5% C6 3.0pF ±5% C7 0.5pF ±5% L1 100nH ±5% BT013 RF In C4 C5 C6 RF Out C7 Note: 10 uF 1. PCB: 31mil thick FR4 2. Distance between the center of the shunt cap(C6) and the input pin of BT013 is 3.2mm 3. Distance between the center of the shunt cap(C7) and the output pin of BT03 is 8.3mm 1000 pF 100 pF BT013 22 pF 3 pF 100 nH 0.5 pF 22 pF http: //www.berex.com BeRex BT013 Typical Performance http: //www.berex.com BeRex BT013 Application Circuit: 2140 MHz Schematic Diagram Vcc L1 C1 C2 C3 BT013 RF In C4 C5 C6 RF Out C7 BOM C1 100pF Tolerance ±5% C2 1000pF ±5% C3 10uF ±15% C4 24pF ±5% C5 24pF ±5% C6 3pF ±5% C7 0.5pF ±5% L1 33nH ±5% Note: 10 uF 1000 pF 100 pF BT013 24 pF 3 pF 33 nH 0.5 pF 24 pF 1. PCB: 31mil thick FR4 2. Distance between the center of the shunt cap(C6) and the input pin of BT013 is 1.5mm 3. Distance between the center of the shunt cap(C7) and the output pin of BT03 is 6.4mm http: //www.berex.com BeRex BT013 Typical Performance http: //www.berex.com BeRex BT013 Application Circuit: 2400MHz Schematic Diagram BOM Vcc L1 C1 C2 C3 C1 Tolerance 100pF ±5% C2 1000pF ±5% C3 10uF ±15% C4 100pF ±5% C5 100pF ±5% C6 2pF ±5% C7 0.5pF ±5% L1 33nH ±5% BT013 RF In C4 C5 C6 RF Out C7 Note: 10 uF 1. PCB: 31mil thick FR4 2. Distance between the center of the shunt cap(C6) and the input pin of BT013 is 0.7mm 3. Distance between the center of the shunt cap(C7) and the output pin of BT03 is 3.2mm 1000 pF 100 pF BT013 100 pF 2 pF 33 nH 0.5 pF 100 pF http: //www.berex.com BeRex BT013 Typical Performance http: //www.berex.com BeRex BT013 Application Circuit: 3500MHz Schematic Diagram BOM Tolerance C1 22pF ±5% C2 0.75pF ±5% C3 0.5pF ±5% C4 100pF ±5% C5 1000pF ±5% C6 10uF ±20% C7 0.5pF ±5% C8 22pF ±5% L1 33nH ±5% Note: 10uF 1000 pF 100pF 100 pF 0.5pF BT013 BT013 33nH B 22pF 22pF B 0.75pF 0.5pF 1. PCB: 31mil thick FR4 2. Distance between the center of the shunt cap(C2) and the input pin of BT013 is 10mm 3. Distance between the center of the series cap(C3) and the input pin of BT013 is 4mm 3. Distance between the center of the shunt cap(C7) and the output pin of BT03 is 3mm http: //www.berex.com BeRex BT013 Typical Performance http: //www.berex.com BeRex BT013 Package Outline Dimension Suggested PCB Land Pattern and PAD Layout PCB Land Pattern PCB Mounting 0.40 1.30 0.40 Ø0.40 0.40 0.75 1.20 2.00 1.20 0.50 1.20 1.20 2.80 1.50 1.00 0.65 Note : All dimension are in millimeters Visit http://www.berex.com for PCB layout http: //www.berex.com BeRex BT013 Tape & Reel Packaging information: SOT89 Tape Width (mm): 12 Reel Size (inches): 7 Device Cavity Pitch (mm): 8 Devices Per Reel: 1000 Lead plating finish 100% Tin Matte finish. (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns) MSL / ESD Rating ESD Rating Value Test Standard Class 1 Passes <1000V Human Body Model (HBM) JEDEC Standard JESD22-A114B MSL Rating Standard Level 1 at +265C convection reflow JEDEC Standard J-STD-020 NATO CAGE code: 2 N 9 6 F NOTICE BeRex Corporation reserves the right to make changes of product specification or to discontinue product at any time without notice. http: //www.berex.com