BT013 1500-4000 MHz Medium Power Amplifier Device Features OIP3 = 45.0 dBm @ 1900 MHz Gain = 15.0 dB @ 1900 MHz Output P1 dB = 27.5 dBm @ 1900 MHz 50 Ω Cascadable Patented Over Voltage Protection Circuit Lead-free/RoHS-compliant SOT-89 SMT package Product Description Typical Performance1 BeRex’s BT013 is a high performance and a high dynamic range amplifier in a low cost surface mount package(SOT-89) with a RoHS -compliant, that incorporates reliable heterojunction-bipolar-transistor (HBT) devices fabricated with InGaP GaAs technology. This device is designed for use where high linearity is required and features high OIP3 and P1 with low consumption current (135mA) and requires a few external matching components such as a DC blocking capacitors on the In/Output pin, a bypass capacitor and a RF choke for the out port. All devices are 100% RF/DC tested. Parameter Frequency 1900 2140 2400 3500 MHz Gain 15.0 14.0 13.2 10.7 dB S11 -17.5 -12.0 -13.0 -26.0 dB S22 -12.5 -12.0 -13.0 -25.0 dB 2 OIP3 P1dB 45.0 27.5 45.0 27.2 43.0 27.0 40.0 26.0 dBm dBm IS-95C ACPR 21.0 - - - dBm WCDMA ACLR 6.8 19.5 6.8 18.5 6.8 7.1 dBm dB Noise Figure 1 Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system. 2 OIP3 _ measured with two tones at an output of 13 dBm per tone separated by 1 MHz. *ACPR&ACLR CH Power _ measured at 45dBc. Min. Applications Base station Infrastructure/RFID Commercial/Industrial/Military wireless system Unit Bandwidth IC @ (Vc = 5V) VC RTH Typical 1500 115 135 5.0 50 Max. Unit 4000 155 MHz mA V °C/W Application Circuits Absolute Maximum Ratings Vcc Bypass RF Choke RF In RF Out BT013 DC Block DC Block *external matching circuit: refer to the page 6 to 12. Parameter Operating Case Temperature Storage Temperature Junction Temperature Operating Voltage Supply Current Input RF Power Rating -40 to +85 -55 to +155 +220 Unit °C °C °C +7.0 200 23 V mA dBm *Operation of this device above any of these parameters may result in permanent damage. BeRex ●website: www.berex.com ● email: [email protected] 1 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. D BT013 1500-4000 MHz Medium Power Amplifier V-I Characteristics BeRex SOT89 Evaluation Board BeRex Evaluation Board *Voltage protection works at 5~6 V *Dielectric constant _ 4.2 *RF pattern width 52mil *31mil thick FR4 PCB Typical Device Data S-parameters (Vc=5V, Ic=135mA, T=25°C) BeRex ●website: www.berex.com ● email: [email protected] 2 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. D BT013 1500-4000 MHz Medium Power Amplifier S-Parameter (Vdevice = 5.0V, Icc = 135mA, T = 25 °C, calibrated to device leads) BeRex Freq [MHz] S11 [Mag] S11 [Ang] S21 [Mag] S21 [Ang] S12 [Mag] S12 [Ang] S22 [Mag] S22 [Ang] 100 500 1000 1500 2000 2500 3000 3500 4000 -0.046 -0.952 -1.111 -0.928 -1.240 -1.390 -1.669 -1.989 -2.281 -30.149 -116.77 -162.01 157.99 129.31 104.6 82.694 60.455 37.752 2.219 6.737 13.26 10.718 9.181 8.334 6.491 6.124 5.024 -128.4 -174.18 161.56 121.35 101.55 81.201 66.725 51.795 33.795 -41.958 -32.703 -32.513 -30.171 -28.599 -26.76 -26.706 -25.792 -24.653 66.107 25.318 76.255 46.516 42.527 37.808 32.623 26.141 20.698 -3.497 -3.457 -7.557 -7.780 -7.262 -7.180 -7.38 -7.336 -6.823 165.97 162.64 117.5 127.17 116.25 97.537 74.648 50.666 32.131 ●website: www.berex.com ● email: [email protected] 3 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. D BT013 1500-4000 MHz Medium Power Amplifier WCDMA 6FA 2140 –55dBc WCDMA 6FA 2140 –60dBc BeRex ●website: www.berex.com ● email: [email protected] 4 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. D BT013 1500-4000 MHz Medium Power Amplifier ACLR BeRex ●website: www.berex.com ● email: [email protected] 5 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. D BT013 1500-4000 MHz Medium Power Amplifier Application Circuit: 1900 MHz Schematic Diagram BOM C1 C2 C3 +5V L1 RFin C4 C5 RFout BT013 C7 C6 10 uF Tolerance C1 100pF ±5% C2 1000pF ±5% C3 10uF ±20% C4 22pF ±5% C5 22pF ±5% C6 3pF ±5% C7 0.5pF ±5% L1 100nH ±5% Note: 1. PCB: 31mil thick FR4. 1000 pF 2. Distance between the center of the shunt cap (C6) and the input pin of BT013 _ 3.2mm. 100 pF BT013 22 pF BeRex 3 pF 3. Distance between the center of the shunt cap (C7) and the output pin of BT013 _ 8.3mm. 100 nH 0.5 pF 22 pF ●website: www.berex.com ● email: [email protected] 6 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. D BT013 1500-4000 MHz Medium Power Amplifier Typical Performance BeRex ●website: www.berex.com ● email: [email protected] 7 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. D BT013 1500-4000 MHz Medium Power Amplifier Application Circuit: 2140MHz Schematic Diagram C1 C2 C3 +5V L1 RFin C4 C5 RFout BT013 C6 C7 10 uF BOM C1 100pF Tolerance ±5% C2 1000pF ±5% C3 10uF ±20% C4 24pF ±5% C5 24pF ±5% C6 3pF ±5% C7 0.5pF ±5% L1 33nH ±5% Note: 1. PCB: 31mil thick FR4 1000 pF 2. Distance between the center of the shunt cap (C6) and the input pin of BT013 _ 1.5mm. 100 pF BT013 24 pF BeRex 3 pF 3. Distance between the center of the shunt cap (C7) and the output pin of BT013 _ 6.4mm. 33 nH 0.5 pF 24 pF ●website: www.berex.com ● email: [email protected] 8 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. D BT013 1500-4000 MHz Medium Power Amplifier Typical Performance BeRex ●website: www.berex.com ● email: [email protected] 9 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. D BT013 1500-4000 MHz Medium Power Amplifier Application Circuit: 2400MHz Schematic Diagram BOM C1 C2 C3 +5V L1 RFin C4 RFout C5 BT013 C6 C7 10 uF 1000 pF 100 pF BT013 100 pF BeRex 2 pF 33 nH 0.5 pF Tolerance C1 100pF ±5% C2 1000pF ±5% C3 10uF ±15% C4 100pF ±5% C5 100pF ±5% C6 2pF ±5% C7 0.5pF ±5% L1 33nH ±5% Note: 1. PCB: 31mil thick FR4 2. Distance between the center of the shunt cap (C6) and the input pin of BT013 _ 0.7mm. 3. Distance between the center of the shunt cap (C7) and the output pin of BT013 _ 3.2mm. 100 pF ●website: www.berex.com ● email: [email protected] 10 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. D BT013 1500-4000 MHz Medium Power Amplifier Typical Performance BeRex ●website: www.berex.com ● email: [email protected] 11 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. D BT013 1500-4000 MHz Medium Power Amplifier Application Circuit: 3500MHz Schematic Diagram BOM C1 C2 C3 +5V L1 RFin C4 C7 C5 RFout BT013 C6 C8 Tolerance C1 100pF ±5% C2 C3 C4 C5 C6 C7 C8 L1 1000pF 10uF 22pF 22pF 0.75pF 0.5pF 0.5pF 33nH ±5% ±20% ±5% ±5% ±5% ±5% ±5% ±5% Note: 10uF 1. PCB: 31mil thick FR4 2. Distance between the center of the shunt cap (C6) and the input pin of BT013 _ 10mm. 3. Distance between the center of the series cap (C7) and the input pin of BT013 _ 4mm. 4. Distance between the center of the shunt cap (C8) and the output pin of BT013 _ 3mm. 1000 pF 100pF 100 pF 0.5pF 33nH B 22pF 22pF B 0.75pF BeRex BT013 BT013 0.5pF ●website: www.berex.com ● email: [email protected] 12 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. D BT013 1500-4000 MHz Medium Power Amplifier Typical Performance BeRex ●website: www.berex.com ● email: [email protected] 13 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. D BT013 1500-4000 MHz Medium Power Amplifier Package Outline Dimension Suggested PCB Land Pattern and PAD Layout PCB Land Pattern 0.40 1.30 PCB Mounting 0.40 Ø0.40 0.40 0.75 1.20 2.15 1.20 0.50 0.45 1.20 1.20 2.80 1.50 1.00 0.65 0.35 Note : All dimension are in millimeters PCB lay out _ on BeRex website BeRex ●website: www.berex.com ● email: [email protected] 14 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. D BT013 1500-4000 MHz Medium Power Amplifier Package Marking Tape & Reel SOT89 Packaging information: Tape Width (mm): 12 Reel Size (inches): 7 Device Cavity Pitch (mm): 8 YY = Year, WW = Working Week, XX = Wafer No. Devices Per Reel: 1000 Lead plating finish 100% Tin Matte finish (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) MSL / ESD Rating ESD Rating: Class 1B Value: Passes <1000V Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114B MSL Rating: Level 1 at +265°C convection reflow Standard: JEDEC Standard J-STD-020 NATO CAGE code: 2 BeRex N 9 6 F ●website: www.berex.com ● email: [email protected] 15 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. D