Revised January 2000 74VCX162374 Low Voltage 16-Bit D-Type Flip-Flop with 3.6V Tolerant Inputs and Outputs and 26Ω Series Resistors in Outputs General Description Features The VCX162374 contains sixteen non-inverting D-type flipflops with 3-STATE outputs and is intended for bus oriented applications. The device is byte controlled. A buffered clock (CP) and output enable (OE) are common to each byte and can be shorted together for full 16-bit operation. The VCX162374 is also designed with 26Ω series resistors in the outputs. This design reduces line noise in applications such as memory address drivers, clock drivers and bus transceivers/transmitters. The 74VCX162374 is designed for low voltage (1.65V to 3.6V) VCC applications with I/O compatibility up to 3.6V. The 74VCX162374 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining low CMOS power dissipation. ■ 1.65V–3.6V VCC supply operation ■ 3.6V tolerant inputs and outputs ■ 26Ω series resistors in outputs ■ tPD (CLK to O n) 3.4 ns max for 3.0V to 3.6V VCC 4.8 ns max for 2.3V to 2.7V VCC 9.6 ns max for 1.65V to 1.95V VCC ■ Power-off high impedance inputs and outputs ■ Supports live insertion and withdrawal (Note 1) ■ Static Drive (IOH/IOL) ±12 mA @ 3.0V VCC ±8 mA @ 2.3V VCC ±3 mA @ 1.65V VCC ■ Uses patented noise/EMI reduction circuitry ■ Latch-up performance exceeds 300 mA ■ ESD performance: Human body model > 2000V Machine model > 200V Note 1: To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver. Ordering Code: Order Number 74VCX162374MTD Package Package Descriptions Number MTD48 48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Logic Symbol Pin Descriptions Pin Names © 2000 Fairchild Semiconductor Corporation DS500235 Description OEn Output Enable Input (Active LOW) CPn Clock Pulse Input I0–I15 Inputs O0–O15 Outputs www.fairchildsemi.com 74VCX162374 Low Voltage 16-Bit D-Type Flip-Flop January 2000 74VCX162374 Connection Diagram Truth Tables Inputs Outputs OE1 I0–I7 O0–O7 L H H L L L L L X O0 X H X Z CP1 Inputs Outputs OE2 I8–I15 O8–O15 L H H L L L L L X O0 X H X Z CP2 H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial (HIGH or LOW, inputs may not float) Z = High Impedance O0 = Previous O0 before HIGH-to-LOW of CP Functional Description flop will store the state of their individual I inputs that meet the setup and hold time requirements on the LOW-to-HIGH Clock (CPn) transition. With the Output Enable (OEn) LOW, the contents of the flip-flops are available at the outputs. When OEn is HIGH, the outputs go to the high impedance state. Operations of the OEn input does not affect the state of the flip-flops. The 74VCX162374 consists of sixteen edge-triggered flipflops with individual D-type inputs and 3-STATE true outputs. The device is byte controlled with each byte functioning identically, but independent of the other. The control pins can be shorted together to obtain full 16-bit operation. Each clock has a buffered clock and buffered Output Enable common to all flip-flops within that byte. The description which follows applies to each byte. Each flip- Logic Diagram Byte 1 (0:7) Byte 2 (8:15) Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. www.fairchildsemi.com 2 Supply Voltage (VCC) −0.5V to +4.6V DC Input Voltage (VI) −0.5V to +4.6V Recommended Operating Conditions (Note 4) Power Supply Output Voltage (VO) Operating −0.5V to +4.6V Outputs 3-STATED Outputs Active (Note 3) −0.5V to VCC +0.5V Output Voltage (VO) −50 mA Output in Active States DC Output Diode Current (IOK) −50 mA VO > VCC +50 mA ±50 mA VCC = 3.0V to 3.6V ±12 mA VCC = 2.3V to 2.7V ±8 mA VCC = 1.65V to 2.3V DC VCC or GND Current per Supply Pin (ICC or GND) 0.0V to 3.6V Output Current in IOH/IOL DC Output Source/Sink Current Storage Temperature Range (TSTG) 0V to VCC Output in “OFF” State VO < 0V (IOH/IOL) 1.2V to 3.6V −0.3V to +3.6V Input Voltage DC Input Diode Current (IIK) VI < 0V 1.65V to 3.6V Data Retention Only ±3 mA Free Air Operating Temperature (TA) ±100 mA −40°C to +85°C Minimum Input Edge Rate (∆t/∆V) −65°C to +150°C VIN = 0.8V to 2.0V, VCC = 3.0V 10 ns/V Note 2: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 3: IO Absolute Maximum Rating must be observed. Note 4: Floating or unused inputs must be held HIGH or LOW. DC Electrical Characteristics (2.7V < VCC ≤ 3.6V) Symbol Parameter Conditions VCC (V) Min 2.0 VIH HIGH Level Input Voltage 2.7 − 3.6 VIL LOW Level Input Voltage 2.7 − 3.6 VOH HIGH Level Output Voltage VOL LOW Level Output Voltage IOH = −100 µA Max Units 0.8 V V 2.7 − 3.6 VCC − 0.2 V IOH = −6 mA 2.7 2.2 V IOH = −8 mA 3.0 2.4 V IOH = −12 mA 3.0 2.2 V IOL = 100 µA 2.7 − 3.6 0.2 IOL = 6 mA 2.7 0.4 V IOL = 8 mA 3.0 0.55 V V IOL = 12 mA 3.0 0.8 V II Input Leakage Current 0 ≤ VI ≤ 3.6V 2.7 − 3.6 ±5.0 µA IOZ 3-STATE Output Leakage 0 ≤ VO ≤ 3.6V 2.7 − 3.6 ±10 µA µA VI = V IH or VIL IOFF Power-OFF Leakage Current 0 ≤ (VI, VO) ≤ 3.6V 0 10 ICC Quiescent Supply Current VI = V CC or GND 2.7 − 3.6 20 µA VCC ≤ (VI, VO) ≤ 3.6V (Note 5) 2.7 − 3.6 ±20 µA VIH = VCC −0.6V 2.7 − 3.6 750 µA ∆ICC Increase in ICC per Input Note 5: Outputs disabled or 3-STATE only. 3 www.fairchildsemi.com 74VCX162374 Absolute Maximum Ratings(Note 2) 74VCX162374 DC Electrical Characteristics (2.3V ≤ VCC ≤ 2.7V) Symbol Parameter Conditions V CC (V) Min 1.6 VIH HIGH Level Input Voltage 2.3 − 2.7 VIL LOW Level Input Voltage 2.3 − 2.7 VOH HIGH Level Output Voltage VOL LOW Level Output Voltage II Input Leakage Current IOZ 3-STATE Output Leakage IOH = −100 µA Max Units V 0.7 V 2.3 − 2.7 VCC − 0.2 V IOH = −4 mA 2.3 2.0 V IOH = −6 mA 2.3 1.8 V IOH = −8 mA 2.3 1.7 IOL = 100 µA 2.3 − 2.7 0.2 V IOL = 6 mA 2.3 0.4 V IOL = 8 mA 2.3 0.6 V 2.3 − 2.7 ±5.0 µA 2.3 − 2.7 ±10 µA 0 ≤ VI ≤ 3.6V 0 ≤ VO ≤ 3.6V VI = VIH or VIL V IOFF Power-OFF Leakage Current 0 ≤ (VI, VO) ≤ 3.6V 0 10 µA ICC Quiescent Supply Current VI = VCC or GND 2.3 − 2.7 20 µA VCC ≤ (VI, VO) ≤ 3.6V (Note 6) 2.3 − 2.7 ±20 µA Max Units Note 6: Outputs disabled or 3-STATE only. DC Electrical Characteristics (1.65V ≤ VCC < 2.3V) Symbol Parameter Conditions VCC (V) Min 0.65 × VCC VIH HIGH Level Input Voltage 1.65 - 2.3 VIL LOW Level Input Voltage 1.65 - 2.3 VOH HIGH Level Output Voltage IOH = −100 µA 1.65 - 2.3 VCC − 0.2 IOH = −3 mA 1.65 1.25 IOL = 100 µA 1.65 - 2.3 VOL LOW Level Output Voltage II Input Leakage Current 0 ≤ VI ≤ 3.6V IOZ 3-STATE Output Leakage 0 ≤ VO ≤ 3.6V IOL = 3 mA VI = VIH or VIL V 0.35 × VCC V V V 0.2 V 1.65 0.3 V 1.65 - 2.3 ±5.0 µA 1.65 - 2.3 ±10 µA IOFF Power-OFF Leakage Current 0 ≤ (VI, VO) ≤ 3.6V 0 10 µA ICC Quiescent Supply Current VI = VCC or GND 1.65 - 2.3 20 µA VCC ≤ (VI, VO) ≤ 3.6V (Note 7) 1.65 - 2.3 ±20 µA Note 7: Outputs disabled or 3-STATE only. www.fairchildsemi.com 4 (Note 8) TA = −40°C to +85°C, CL = 30 pF, RL = 500Ω Symbol Parameter VCC = 3.3V ± 0.3V Min Max VCC = 2.5V ± 0.2V Min Max Min Units Max fMAX Maximum Clock Frequency 250 tPHL, tPLH Prop Delay CP to On 0.8 3.4 1.0 4.8 1.5 9.6 ns tPZL, tPZH Output Enable Time 0.8 3.9 1.0 5.4 1.5 9.8 ns tPLZ, tPHZ Output Disable Time 0.8 4.0 1.0 4.4 1.5 7.9 tS Setup Time 1.5 tH Hold Time 1.0 1.0 1.0 ns tW Pulse Width 1.5 1.5 4.0 ns tOSHL Output to Output Skew (Note 9) tOSLH 200 VCC = 1.8V ± 0.15V 100 1.5 0.5 MHz 2.5 0.5 ns ns 0.75 ns Note 8: For CL = 50PF, add approximately 300 ps to the AC maximum specification. Note 9: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH). Dynamic Switching Characteristics Symbol VOLP VOLV VOHV Parameter Quiet Output Dynamic Peak VOL Quiet Output Dynamic Valley VOL Quiet Output Dynamic Valley VOH Conditions CL = 30 pF, VIH = VCC, VIL = 0V CL = 30 pF, VIH = VCC, VIL = 0V CL = 30 pF, VIH = VCC, VIL = 0V V CC (V) TA = +25°C Typical 1.8 0.15 2.5 0.25 3.3 0.35 1.8 −0.15 2.5 −0.25 3.3 −0.35 1.8 1.55 2.5 2.05 3.3 2.65 Units V V V Capacitance Symbol Parameter Conditions TA = +25°C Typical Units CIN Input Capacitance VCC = 1.8V, 2.5V or 3.3V, VI = 0V or VCC 6 pF COUT Output Capacitance VI = 0V or VCC, VCC = 1.8V, 2.5V or 3.3V 7 pF CPD Power Dissipation Capacitance 20 pF VI = 0V or VCC, f = 10 MHz, VCC = 1.8V, 2.5V or 3.3V 5 www.fairchildsemi.com 74VCX162374 AC Electrical Characteristics 74VCX162374 AC Loading and Waveforms TEST SWITCH tPLH, tPHL Open tPZL, tPLZ 6V at VCC = 3.3 ± 0.3V; VCC x 2 at VCC = 2.5 ± 0.2V; 1.8V ± 0.15V tPZH, tPHZ GND FIGURE 1. AC Test Circuit FIGURE 3. 3-STATE Output High Enable and Disable Times for Low Voltage Logic FIGURE 2. Waveform for Inverting and Non-Inverting Functions FIGURE 4. 3-STATE Output Low Enable and Disable Times for Low Voltage Logic FIGURE 6. Setup Time, Hold Time and Recovery Time for Low Voltage Logic FIGURE 5. Propagation Delay, Pulse Width and tREC Waveforms Symbol VCC 3.3V ± 0.3V 2.5V ± 0.2V 1.8V ± 0.15V Vmi 1.5V VCC/2 VCC/2 Vmo 1.5V VCC/2 VCC/2 VX VOL +0.3V VOL +0.15V VOL +0.15V VY VOH −0.3V VOH −0.15V VOH −0.15V www.fairchildsemi.com 6 74VCX162374 Low Voltage 16-Bit D-Type Flip-Flop Physical Dimensions inches (millimeters) unless otherwise noted 48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Body Width Package Number MTD48 Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 7 www.fairchildsemi.com