MB12SPT CHENMKO ENTERPRISE CO.,LTD THRU MINIATURE GLASS PASSIVATED SINGLE-PHASE SURFACE MOUNT BRIDGE RECTIFIER VOLTAGE RANGE 200 - 600 Volts CURRENT 0.8 Ampere MB16SPT FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Surge overload rating of 35 Amperes peak * Glass passivated chip junction * Ideal for printed circuit board * High temperature soldering guaranteed : 260oC/10 seconds at terminals 0.272(6.90) MECHANICAL DATA 0.252(6.40) 0.161(4.10) 0.144(3.65) 0.179(4.55) Case: JEDEC MD-S molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Polarity symbols marked on body Weight: 0.008 ounces, 0.22 gram 0.038(0.96) 0.019(0.48) 0.058(1.47) 0.054(1.37) 0.017(0.43) 0.105(2.67) 0.095(2.41) 0.008(0.20) 0.004(0.10) 0.117(2.97) 0.107(2.72) 0.106(2.70) 0.090(2.30) 0.114(2.90) 0.094(2.40) Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. 0.195(4.95) 0.062(1.57) 0.058(1.47) 0.029(0.74) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 0.205(5.21) 0.016(0.41) 0.006(0.15) 0.195(4.95) 0.049(1.24) 0.039(0.99) MD-S 0.0075(0.19) 0.0065(0.16) MD-S Dimensions in inches and (millimeters) MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) SYMBOL MB12SPT MB14SPT MB16SPT UNITS Maximum Recurrent Peak Reverse Voltage RATINGS VRRM 200 400 600 Volts Maximum RMS Voltage VRMS 140 280 420 Volts Maximum DC Blocking Voltage VDC 200 400 600 Volts Maximum Average Forward Rectified Current TA = 30oC On glass-epoxy P.C.B.(NOTE 1) On aluminum substrate (NOTE 2) Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note 3) Typical thermal resistance per leg IO 0.8 Amps IFSM 35 Amps CJ 13 R Operating and Storage Temperature Range pF o 70 JA TJ, TSTG C/W o -55 to +150 C ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 0.4 A DC Maximum DC reverse current at rated VF @ TA = 25oC MB12SPT MB14SPT MB16SPT UNITS 1.0 Volts 5.0 uAmps 500 uAmps IR DC blocking voltage per leg @ TA = 125oC NOTES : 1. On glass epoxy P.C.B. mounted on 0.05 x 0.05" (1.27 X 1.27 mm) pads 2. On aluminum substrate P.C.B. with an area of 0.8 x 0.8 x 0.25" (20 x 20 x 6.4mm) mounted on 0.05 x 0.05" (1.27 x 1.27mm) solder pad 3. Measured at 1.0 MHZ and applied reverse voltage of 4.0 volts 2002-5 RATING CHARACTERISTIC CURVES ( MB12SPT THRU MB16SPT ) 0.8 Copper Pads .05 In2 (1.27mm2) PC Board 0.7 0.6 0.5 0.4 0.3 0.2 Resistive or Inductive Load 0.1 0 0 20 40 60 80 100 120 140 AMBIENT TEMPERATURE, ( oC ) 160 PEAK FORWARD SURGE CURRENT, ( A ) AVERAGE FORWARD CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER BRIDGE ELEMENT 35 30 Single Half Sine-Wave (JEDEC Method) 25 20 15 10 5 0 1 FIG. 3 - TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 5 10 20 NUMBER OF CYCLES AT 60 Hz 50 100 FIG. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 20 INSTANTANEOUS FORWARD CURRENT, ( A ) 100 TJ =125oC 10 1.0 TJ =25oC .1 10 Pulse Width = 300uS 1% Duty Cycle 3.0 1.0 0.3 TJ =25oC 0.1 .03 .01 .01 0 20 40 60 80 100 0 PERCENT OF RATED PEAK REVERSE VOLTAGE, ( % ) .2 .4 .6 FIG. 5 - TYPICAL JUNCTION CAPACITANCE 100 60 40 20 f = 1.0MHZ Vsig = 50 mVp-p 10 TJ =25oC 6 4 2 1 .1 .2 .4 .8 1.0 1.2 INSTANTANEOUS FORWARD VOLTAGE, ( V ) 200 JUNCTION CAPACITANCE, ( pF ) INSTANTANEOUS REVERSE CURRENT, (uA) 2 1.0 2 4 10 20 REVERSE VOLTAGE, ( V ) 40 100 1.4