www.fairchildsemi.com FAN7071 Landing Correction IC Features Description • Built in Power Amplifier (200mA ) • Low Stanby Current • Incorporating 2 Circuit The FAN7071 is an IC to drive a landing correction coil of CRT monitor. The circuit is suitable for low power consumption design Typical Applications 10-SIPH • CRT Monitor Block Diagram VCC 1 GND 10 CONTROL1 2 Control-1 Bias 5 OUT1P 6 OUT1N CONTROL2 3 Control-2 4 PGND1 8 OUT2P 9 OUT2N 7 PGND2 Rev. 1.0.2 ©2002 Fairchild Semiconductor Corporation FAN7071 8 9 10 GND OUT1N 7 OUT2N 6 OUT2P 5 PGND2 4 OUT1P CONTROL1 3 PGND1 2 CONTROL2 1 VCC Pin Assignments Pin Definitions Pin Number Pin Name Pin Function Description 1 VCC Supply Voltage 2 CONTROL1 Control Input1 3 CONTROL2 Control Input2 4 PGND1 Output block GND 5 OUT1P Output1 Positive 6 OUT1N Output1 Negative 7 PGND2 Output block GND 8 OUT2P Output2 Positive 9 OUT2N Output2 Negative 10 GND GND Absolute Maximum Ratings (Ta = 25°C) Parameter Symbol Value Unit VCC 13.5 V PD 2 W Operating Temperature TOPR −20 ~ +75 °C Operating Temperature Storage Temperature TSTG −55 ~ +150 °C Storage Temperature Thermal Resistance Rθja 60 °C/W Maximum Supply Voltage Power Dissipation 2 Remark Maximum Supply Voltage - Thermal Resistance FAN7071 Recommended Operating Conditions (Ta = 25°C) Parameter Symbol Min. Typ. Max. Unit Supply Voltage VCC 10.8 - 13.2 V Control Input1 Voltage VCONTROL1 0 - 5 V Control Input2 Voltage VCONTROL2 0 - 5 V Output1 Positive Current IOUT1P -200 - 200 mA Output1 Negative Current IOUT1N -200 - 200 mA Output2 Positive Current IOUT2P -200 - 200 mA Output2 Negative Current IOUT2N -200 - 200 mA IPEAK1P -700 - 700 mA IPEAK1N -700 - 700 mA IPEAK2P -700 - 700 mA IPEAK2N -700 - 700 mA Peak Current Electrical Characteristics (Ta = 25°C, Unless otherwise specified) Parameter Circuit Current Output1 Positive Voltage Symbol Conditions Min. Typ. Max. Unit ICC 1.5 3.0 4.5 mA VOUT1P 4.5 4.9 5.3 V 4.5 4.9 5.3 V 4.5 4.9 5.3 V 4.5 4.9 5.3 V VCONTROL1 = 2.5V VCONTROL2 = 2.5V Output1 Negative Voltage VOUT1N Output2 Positive Voltage VOUT2P Output2 Negative Voltage VOUT2N Voltage OUT1N to OUT1P VOUT1_1 VCONTROL1 = 2.5V -0.3 0 0.3 V Voltage OUT1N to OUT1P VOUT1_2 VCONTROL1 = 5V 6.4 7.0 7.4 V Voltage OUT1N to OUT1P VOUT1_3 VCONTROL1 = 0V -7.4 -7.0 -6.4 V Voltage OUT2N to OUT2P VOUT2_1 VCONTROL2 = 2.5V -0.3 0 0.3 V Voltage OUT2N to OUT2P VOUT2_2 VCONTROL2 = 5V 6.4 7.0 7.4 V Voltage OUT2N to OUT2P VOUT2_3 VCONTROL2 = 0V -7.4 -7.0 -6.4 V 3 FAN7071 Power Darting Curve 2250 2000 Power Dissipation PD(mW) 1750 O Rθja=60 C/W 1500 1250 1000 750 500 250 0 0 25 50 75 100 125 150 O Ambient Temperature Ta ( C) Typical Application Circuit FAN7071 12V 0~5V PGND2 9 10 GND 8 OUT2N 7 OUT2P 6 OUT1N 5 OUT1P 4 PGND1 3 CONTROL2 2 CONTROL1 VCC 1 0~5V Load Load Typical Output Voltages By Control Input Voltage Change 8.4V V5 V6 Output Voltage Output Voltage 8.4V 4.9V 1.4V 4.9V 1.4V 0 2.5V Control Input(V2) 4 V8 V9 5V 0 2.5V Control Input(V3) 5V -0.05 3.20 ±0.20 0.126 ±0.008 2.54 0.100 0.60 ±0.10 0.024 ±0.004 1.40 ±0.10 0.055 ±0.004 26.90 MAX 1.059 ( 1.82 ) 0.072 R 1.60 ±0.20 0.063 ±0.008 2.29 ±0.20 0.090 ±0.008 16.00 ±0.20 0.630 ±0.008 5.91 ±0.30 0.233 ±0.012 21.09 MAX 0.830 3.60 ±0.20 0.142 ±0.008 +0.004 0.020 -0.002 0.50 +0.10 1.55 ±0.10 0.061 ±0.004 26.50 ±0.20 1.043 ±0.008 FAN7071 Mechanical Dimensions Package 10-SIPHA 1.20 ±0.20 0.047 ±0.008 #1 #10 8.40 ±0.20 0.331 ±0.008 5 FAN7071 Mechanical Dimensions (Continued) Package 10-SIPHD 6 FAN7071 Ordering Information Device Package FAN7071S 10-SIPHA FAN7071TS 10-SIPHD Operating Temp. −20°C ~ +75°C 7 FAN7071 DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com 4/3/02 0.0m 001 Stock#DSxxxxxxxx 2002 Fairchild Semiconductor Corporation