CLARE TS117

TS117
Multifunction Telecom Switch
Load Voltage
Load Current
Max RON
TS117
350
120
35
Description
TS117 is a 350V, 120mA, 35Ω 1-Form-A relay with an
optocoupler in a single package. It provides high sensitivity and is an ideal solution for many telecom applications.
Current limiting version is available ("L" suffix).
Units
V
mA
Ω
Features
• Small 8 Pin DIP Package
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 3750VRMS Input/Output Isolation
• FCC Compatible
• VDE Compatible
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Surface Mount and Tape & Reel Versions Available
Applications
• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching (Laptop, Notebook, Pocket Size)
• Hookswitch
• Dial Pulsing
• Ground Start
• Ringer Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
DS-TS117-R9
Approvals
• UL Recognized: File Number E76270
• CSA Certified: File Number LR 43639-10
• BSI Certified:
• BS EN 60950:1992 (BS7002:1992)
Certificate #:7344
• BS EN 41003:1993
Certificate #:7344
Ordering Information
Part #
TS117
TS117P
TS117PTR
TS117S
TS117STR
Description
8 Pin DIP (50/Tube)
8 Pin Flatpack (50/Tube)
8 Pin Flatpack T&R (1000/Reel)
8 Pin Surface Mount (50/Tube)
8 Pin Surface Mount T&R (1000/Reel)
Pin Configuration
TS117/TS117L Pinout
+ LED - Relay
– LED - Relay
Collector - Phototransistor
Emitter - Phototransistor
www.clare.com
1
8
2
7
3
6
4
5
Load - Relay (MOSFET Output)
Load - Relay (MOSFET Output)
LED - Phototransistor –/+
LED - Phototransistor +/–
1
TS117
Absolute Maximum Ratings (@ 25˚ C)
Parameter
Input Power Dissipation
Input Control Current
Peak (10ms)
Reverse Input Voltage
Total Power Dissipation
Isolation Voltage
Input to Output
Operational Temperature
Storage Temperature
Soldering Temperature
DIP Package
Flatpack/Surface Mount
Package
(10 Seconds Max.)
1
Derate Linearly 1.33 mw/˚C
2
Derate Linearly 6.67 mw/˚C
Min
-
Absolute Maximum Ratings are stress ratings. Stresses
in excess of these ratings can cause permanent damage
to the device. Functional operation of the device at these
or any other conditions beyond those indicated in the
operational sections of this data sheet is not implied.
Exposure of the device to the absolute maximum ratings
for an extended period may degrade the device and effect
its reliability.
Typ Max Units
- 1501 mW
50
mA
1
A
5
V
- 8002 mW
3750
-40
-40
-
VRMS
+85
°C
+125 °C
-
-
+260
°C
-
-
+220
°C
Electrical Characteristics
Parameter
Relay Portion (Pins 7, 8)
Output Characteristics @ 25°C
Load Voltage (Peak)
Load Current (Continuous)
Peak Load Current
On-Resistance
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Load Current Limit
Relay Portion (Pins 1, 2)
Input Characteristics @ 25°C
Input Control Current
Input Dropout Current
Input Voltage Drop
Reverse Input Voltage
Reverse Input Current
2
Conditions
Symbol
Min
Typ
Max
Units
10ms
IL=120mA
VL=350V
VL
IL
ILPK
RON
ILEAK
-
23
-
350
120
350
35
1
V
mA
mA
Ω
µA
IF=5mA, VL=10V
IF=5mA, VL=10V
50V; f=1MHz
TON
TOFF
COUT
ICL
-
25
-
3.0
3.0
-
ms
ms
pF
mA
IL=120mA
IF=5mA
VR=5V
IF
IF
VF
VR
IR
2
0.4
0.9
-
0.7
1.2
-
50
1.4
5
10
mA
mA
V
V
µA
www.clare.com
Rev. 9
TS117
Electrical Characteristics (Continued)
Parameter
Detector Portion (Pins 3,4)
Output Characteristics @ 25°C
Phototransistor Blocking Voltage
Phototransistor Output Current
Saturation Voltage
Current Transfer Ratio
Detector Portion (Pins 5,6)
Input Characteristics @ 25°C
Input Control Current
Input Voltage Drop
Input Current
(Detector must be off)
Input to Output Capacitance
(Relay Only)
Capacitance Input to Output
Input to Output Isolation
Rev. 9
Conditions
Symbol
Min
Typ
Max
Units
IC=10µA
VCE=5V, IF=0mA
IC=2mA, IF=16mA
IF=6mA, VCE=0.5V
BVCEO
ICEO
VSAT
CTR
20
33
50
50
0.3
100
500
0.5
-
V
nA
V
%
IC=2mA, VCE=0.5V
IF=5mA
IC=1µA, VCE=5V
IF
VF
IF
6
0.9
5
2
1.2
25
100
1.4
-
mA
V
µA
-
CI/O
VI/O
3750
3
-
-
pF
pF
VRMS
www.clare.com
3
TS117
PERFORMANCE DATA*
TS117
Typical On-Resistance Distribution
(N=50 Ambient Temperature = 25°C)
(Load: Voltage = 350VDC; Current = 120mADC;
IF = 2mADC)
35
30
30
25
20
15
10
Device Count (N)
35
30
25
20
15
10
5
5
1.17
1.19
1.21
1.23
15
10
0
377.5 388.5 399.5 410.5 421.5 432.5 443.5
On-Resistance (Ω)
TS117
Typical IF for Switch Operation
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC)
Blocking Voltage (V)
TS117
Typical Turn-On Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC; IF = 2mADC)
TS117
Typical IF for Switch Dropout
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC)
25
25
20
20
20
15
10
5
0
Device Count (N)
25
Device Count (N)
15
10
5
0.39
0.65
0.91
1.17
1.43
1.69
1.95
0.39
0.65
0.91
LED Current (mA)
Load Current (mA)
20
15
10
5
1.17
1.43
1.69
0.15
1.95
0
180
0.016
160
0.014
140
0.012
120
100
20mA
10mA
5mA
80
60
-20
0
20
415
410
405
400
395
60
Temperature (°C)
80
100
40
60
80
100
120
1.95
0.010
0.008
0.006
-40
0
20
40
60
80
100
Temperature (°C)
TS117
Typical Turn-On vs. Temperature
(Load Current = 120mADC)
TS117
Typical Turn-Off vs. Temperature
(Load Current = 120mADC)
5.000
4.500
4.000
3.500
3.000
2.500
2.000
1.500
1.000
0.500
0
2mA
5mA
10mA
20mA
-40
-20
Temperature (°C)
-20
0
20
40
60
Temperature (°C)
80
100
Turn-Off (ms)
Turn-On (ms)
420
1.65
0
TS117
Typical Blocking Voltage
vs. Temperature
425
1.35
0.002
-40
430
1.05
0.004
40
Turn-Off (ms)
40
0.75
TS117
Typical Leakage vs. Temperature
(Measured across Pins 7 & 8)
0
0.035 0.105 0.175 0.245 0.315 0.385 0.455
20
0.45
Turn-On (ms)
20
0
5
TS117
Typical Load Current vs. Temperature
25
-20
10
LED Current (mA)
TS117
Typical Turn-Off Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC; IF = 2mADC)
-40
15
0
0
Leakage (µA)
Device Count (N)
20
18.75 19.85 20.95 22.05 23.15 24.25 25.35
1.25
LED Forward Voltage Drop (V)
Blocking Voltage (VRMS)
25
5
0
0
Device Count (N)
TS117
Typical Blocking Voltage Distribution
(N=50 Ambient Temperature = 25°C)
35
Device Count (N)
Device Count (N)
TS117
Typical LED Forward Voltage Drop
(N=50 Ambient Temperature = 25°C; IF = 5mADC)
1.000
0.900
0.800
0.700
0.600
0.500
0.400
0.300
0.200
0.100
0
2mA
-40
-20
0
20
40
60
5mA
80
100
Temperature (°C)
The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
4
www.clare.com
Rev. 9
TS117
PERFORMANCE DATA*
TS117
Typical LED Forward Voltage Drop
vs. Temperature
1.4
50mA
30mA
20mA
10mA
5mA
1.0
0.8
-40
-20
0
20
40
60
80
100
0.7
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
0.6
Turn-Off (ms)
Turn-On (ms)
1.6
0.2
10
15
20
25
30
35
40
45
0
50
3.000
2.500
2.500
30
20
2.000
1.500
1.000
10
0.500
0
0
0
20
40
60
80
LED Current (mA)
3.000
40
100
-20
0
20
40
60
80
Temperature (°C)
TS117
Typical Load Current vs. Load Voltage
(Ambient Temperature = 25°C; IF = 2mA)
TS117
Energy Rating Curve
Load Current (A)
50
0
-50
-100
-150
-3
-2
-1
0
1
2
3
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
10µs 100µs 1ms 10ms 100ms
30
35
40
45
50
2.000
1.500
1.000
-40
100
-20
0
20
40
60
80
100
Temperature (°C)
TS117
Typical Normalized CTR vs Forward Current
(VCE = 0.5V)
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
10s 100s
1s
Time
Load Voltage (V)
TS117
Typical Normalized CTR vs. Temperature
(VCE = 0.5V)
25
0
-40
100
20
0.500
Temperature (°C)
150
15
TS117
Typical IF for Switch Dropout
vs. Temperature
(Load Current = 120mADC)
50
-20
10
LED Forward Current (mA)
60
-40
5
TS117
Typical IF for Switch Operation
vs. Temperature
(Load Current = 120mADC)
LED Current (mA)
On-Resistance (Ω)
0.3
LED Forward Current (mA)
TS117
Typical On-Resistance vs. Temperature
(Load Current = 120mADC; IF = 2mADC)
Load Current (mA)
0.4
0
5
Temperature (°C)
0
0
2
4
6
8
10
12
14
16
18
20
IF (mA)
TS117
Typical Collector Current vs. Forward Current
(VCE = 0.5V)
8
12
7
10
6
8
5
4
3
2
1
0
-40
-20
0
20
40
60
Temperature (°C)
1mA
2mA
5mA
10mA
15mA
20mA
80 100 120
IC (mA)
Normalized CTR (%)
0.5
0.1
0
120
Normalized CTR (%)
LED Forward Voltage Drop (V)
1.8
1.2
TS117
Typical Turn-Off vs. LED Forward Current
(Load Current = 120mADC)
TS117
Typical Turn-On vs. LED Forward Current
(Load Current = 120mADC)
6
4
2
0
0
2
4
6
8
10
12
14
16
18
20
IF (mA)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
Rev. 9
www.clare.com
5
TS117
Mechanical Dimensions
9.652 ± .381
(.380 ± .015)
8 Pin DIP Through Hole (Standard)
2.540 ± .127
8-.800 DIA. (.100 ± .005)
(8-.031 DIA.)
2.540 ± .127
(.100 ± .005)
7.620 ± .254
(.300 ± .010)
3.302
(.130)
7.239 TYP.
(.285)
PC Board Pattern
(Top View)
9.144 ± .508
(.360 ± .020)
6.350 ± .127
(.250 ± .005)
9.144 TYP.
(.360)
.457 ± .076
(.018 ± .003)
7.620 ± .127
(.300 ± .005)
8.077 ± .127
(.318 ± .005 )
9.652 ± .381
(.380 ± .015)
8 Pin DIP Surface Mount (“S” Suffix)
4.445 ± .127
(.175 ± .005)
3.302
(.130)
.254 TYP.
(.010)
(.100 ± .005)
9.525 ± .254
(.375 ± .010)
6.350 ± .127
(.250 ± .005)
.635 TYP.
(.025)
PC Board Pattern
(Top View)
2.540 ± .127
2.540 ± .127
(.100 ± .005)
7.620 ± .254
(.300 ± .010)
8.305 ± .127
(.327 ± .005)
1.905 ± .127
(.075 ± .005)
.457 ± .076
(.018 ± .003)
1.498 ± .127
(.059 ± .005)
8.077 ± .127
(.318 ± .005)
9.652 ± .381
(.380 ± .015)
2.540 ± .127
(.100 ± .005)
8 Pin Flatpack (“P” Suffix)
2.159 TYP.
(.085)
PC Board Pattern
(Top View)
2.540 ± .127
(.100 ± .005)
7.620 ± .254
(.300 ± .010)
2.286 MAX.
.635 ± .127
(.090)
(.025)
7.620 ± .127
(.300 ± .005)
6.350 ± .127
(.250 ± .005)
6.350 ± .127
(.250 ± .005)
9.398 ± .127
(.370 ± .005)
8.763 ± .127
(.345 ± .005)
.203
(.008)
1.193
(.047)
.457 ± .076
(.018 ± .003)
8.077 ± .127
(.318 ± .005)
.787
(.031)
Dimensions
mm
(inches)
6
www.clare.com
Rev. 9
TS117
Mechanical Dimensions
Tape and Reel Packaging for 8 Pin Surface Mount Package
330.2 DIA.
(13.00)
6.731 MAX.
1.753 ± .102
(.265)
(.069 ± .004)
.406 MAX.
(.016)
Top Cover
Tape Thickness
.102 MAX.
(.004)
2.007 ± .102 1.498 ± .102 3.987 ± .102
(.079 ± .004) (.059 ± .004) (.157 ± .004)
7.493 ± .102
(.295 ± .004)
1
8
12.090
(.476)
10.300
(.405)
4.877
(.192)
Top Cover
Tape
Embossed Carrier
16.002 ± .305
(.630 ± .012)
.050R TYP.
11.989 ± .102
(.472 ± .004)
10.300 ± .102
(.405 ± .004)
1.549 ± .102
(.061 ± .004)
User Direction of Feed
Embossment
Tape and Reel Packaging for 8 Pin Flatpack Package
330.2 DIA.
(13.00)
Top Cover
Tape Thickness
.102 MAX.
(.004)
6.731 MAX.
1.753 ± 0.102
(.265)
(.069 ± .004)
.406 MAX.
(.016)
2.007 ± .102 1.498 ± .102 3.987 ± .102
(.079 ± .004) (.059 ± .004) (.157 ± .004)
7.493 ± .102
(.295 ± .004)
1
8
12.090
(.476)
10.287
(.405)
4.877
(.192)
Top Cover
Tape
Embossed Carrier
Embossment
16.002 ± .305
(.630 ± .012)
.050R TYP.
11.988 ± .102
(.472 ± .004)
10.287 ± .102
(.405 ± .004)
1.549 ± .102
(.061 ± .004)
User Direction of Feed
Dimensions
mm
(inches)
Rev. 9
www.clare.com
7
Worldwide Sales Offices
CLARE LOCATIONS
EUROPE
ASIA/PACIFIC
Clare Headquarters
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
European Headquarters
CP Clare nv
Bampslaan 17
B-3500 Hasselt (Belgium)
Tel: 32-11-300868
Fax: 32-11-300890
Clare Micronix Division
145 Columbia
Aliso Viejo, CA 92656-1490
Tel: 1-949-831-4622
Fax: 1-949-831-4628
France
Clare France Sales
Lead Rep
99 route de Versailles
91160 Champlan
France
Tel: 33 1 69 79 93 50
Fax: 33 1 69 79 93 59
Asian Headquarters
Clare
Room N1016, Chia-Hsin, Bldg II,
10F, No. 96, Sec. 2
Chung Shan North Road
Taipei, Taiwan R.O.C.
Tel: 886-2-2523-6368
Fax: 886-2-2523-6369
SALES OFFICES
AMERICAS
Americas Headquarters
Clare
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
Eastern Region
Clare
P.O. Box 856
Mahwah, NJ 07430
Tel: 1-201-236-0101
Fax: 1-201-236-8685
Toll Free: 1-800-27-CLARE
Central Region
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
Western Region
Clare
1852 West 11th Street, #348
Tracy, CA 95376
Tel: 1-209-832-4367
Fax: 1-209-832-4732
Toll Free: 1-800-27-CLARE
Canada
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
Germany
Clare Germany Sales
ActiveComp Electronic GmbH
Mitterstrasse 12
85077 Manching
Germany
Tel: 49 8459 3214 10
Fax: 49 8459 3214 29
Italy
C.L.A.R.E.s.a.s.
Via C. Colombo 10/A
I-20066 Melzo (Milano)
Tel: 39-02-95737160
Fax: 39-02-95738829
Sweden
Clare Sales
Comptronic AB
Box 167
S-16329 Spånga
Tel: 46-862-10370
Fax: 46-862-10371
United Kingdom
Clare UK Sales
Marco Polo House
Cook Way
Bindon Road
Taunton
UK-Somerset TA2 6BG
Tel: 44-1-823 352541
Fax: 44-1-823 352797
http://www.clare.com
Clare cannot assume responsibility for use of any circuitry other
than circuitry entirely embodied in this Clare product. No circuit
patent licenses nor indemnity are expressed or implied. Clare
reserves the right to change the specification and circuitry, without notice at any time. The products described in this document
are not intended for use in medical implantation or other direct life
support applications where malfunction may result in direct physical harm, injury or death to a person.
Specification: DS-TS117-R9
©Copyright 2000, Clare, Inc.
All rights reserved. Printed in USA.
2/20/01