Application: The Dialight DuroSite® LED Shower Safe Emergency Bulkhead luminaire has a rugged design to ensure long life and high reliability when used to identify emergency showers on large industrial sites. Specially designed optics and 360° viewing angle make this a high visibility light unit for this application. This self-contained maintained emergency luminaire offers a minimum of 3 hours of illumination equal to 10% of the standard output. It is ideally suited for explosive environments, mills, chemical plants and other hazardous environments where emergency shower areas are required. Dialight offers flush, angle, stanchion mounting bracket and adjustable mounting options for use with the DuroSite Bulkhead as well as a recessed housing. Mechanical Information DuroSite® LED Emergency Shower Safe Luminaire Fixture Weight: 5.4 kg (11.9 lb) Cable Entry options: All cable entries are drilled and tapped see ordering option Electrical specifications Dimensions in mm [Inches] Operating Voltage: 230/240 VAC Input Current: 110mA Input Wattage: 24W Battery: 3.6V 4Ah Nimh Battery Life: 4 years Battery duration: >3 hours Operating Temp: 0°C to +50°C (-20°C versions available) Harmonics: THD: EN 61000-3-2: 2006 <20% @ 230 VAC Surge Protection: EN-61000-4-5 1 kV line to line 2 kV line to ground Power Factor: > 0.9 Certifications • CE - Compliant EN 55015:2006 / EN 61547:2009 / EN 60598-2-22:1999 Materials • IEC 60068 salt spray testing - severity 1 Housing: Copper free aluminium cast • IK10 to EN 50102 Finish: Light grey epoxy powder coated (RAL7001) Lens: High Impact resistant polycarbonate Mounting Brackets: 306 Stainless steel Stanchion Brackets: Copper free LM6 aluminium cast Configuration: Flush or 30° angle • IP66 to EN 60529 • GOST R approved Features & Benefits • 5 year full performance warranty Photometric Information • 360° visibility Dominant Wavelength • Instant on/off operation 530.0 nm All values typical unless otherwise state • Mercury free, lead free • LED indicator for fixture battery monitoring • Resistant to shock and vibration • L70 rated for >100,000 hours @ 45°C ambient • Factory sealed Ordering Codes for Standard Model 2 M20 Entries on 1 Side Ordering Code: Example: WE-0G4H-FLGD Product Family WE Optic - 0 =No Optics LED Colour Voltage G = Green 4= 230/240 VAC LED qty Bracket Finish Glazing LG = Light Grey D = Dome Lens A = Angle Bracket 18 LEDs - F = Flush Bracket N = No Bracket www.dialight.com DuroSite® LED Emergency Shower Safe Luminaire Mounting Options Bulkhead with no bracket option Recommended for use with below accessories m m ”) 70 .76 (2 ”) 8.9 m( m 226 Bulkhead with 30 degree angle bracket option Bulkhead with flush mount bracket option m 8m ”) 16 6.61 ( .03”) m (8 204m m 26m ”) (8.9 2 ) .31” m (0 Ø 8m 35mm (1.38”) mm Ø 8 1”) . (0 3 M6 x 12mm TAPTITE Recessed housing Adjustable bracket 259,4mm (10.02”) 282 (11.102) 186,6 (7.346) 256 CTRS (10.079”) 116,2mm (4.5”) 90° 101 Ø 6 (3.976) (.236) 49,8 (1.961) Ø 36,5 (1.437) 60° 240 CTRS (9.449”) 180mm (7.1”) 75mm (3.0”) 235 (9.252) 183,6 (7.228) 340,6 (13.409) 30° 106,99 (4.212) 75mm (3.0”) 37,5mm (1.5”) 337,6 (13.291) Ø 8.5mm (.3”) Ø 36mm (1.4”) Accessories Part Number Description WPBRKTSSADJ Adjustable bracket 306 stainless steel adjustable bracket 6x Ø 8.5mm (0.35”) mounting holes Recommended to be used with WEA2 or WEA4 versions. WPSTMBLG0022 WPSTMBLG0024 WPSTMBLG2522 WPSTMBLG2524 WPRECESSWH BSP threaded straight stanchion mounting bracket Copper free LM6 material with EPDM gasket applied and 2 M6 grub screws Stanchion mount bracket comes with BSP 1 1/2” threaded base that fits 1 1/2” pole. Other threading options available, MOQ applies. Recommended to be used with WEA5 versions. NPT threaded straight stanchion mounting bracket Copper free LM6 material with EPDM gasket applied and 2 M6 grub screws Stanchion mount bracket comes with NPT 1 1/2” threaded base that fits 1 1/2” pole. Other threading options available, MOQ applies. Recommended to be used with WEA5 versions. BSP threaded 25 degree stanchion mounting bracket Copper free LM6 material with EPDM gasket applied and 2 M6 grub screws Stanchion mount bracket comes with BSP 1 1/2” threaded base that fits 1 1/2” pole. Other threading options available, MOQ applies. Recommended to be used with WEA5 versions. NPT threaded 25 degree stanchion mounting bracket Copper free LM6 material with EPDM gasket applied and 2 M6 grub screws Stanchion mount bracket comes with NPT 1 1/2” threaded base that fits 1 1/2” pole. Other threading options available, MOQ applies. Recommended to be used with WEA5 versions. Recessed housing welded aluminium construction with white powder coating (Ral 9010) (refer to certificate schedule for ambient operating conditions) Dialight reserves the right to make changes at any time in order to supply the best product possible. The most current version of this document will always be available at: www.dialight.com/Assets/Brochures_And_Catalogs/Illumination/MDEXSSWSEUHZC001.pdf MDEXSSWSEUHZC001_A www.dialight.com