SAW Components SAW Duplexer W-CDMA Band 4 / CDMA 1x AWS Band Series/type: Ordering code: B7959 B39212B7959P810 Date: Version: Feburary 11, 2011 2.2 EPCOS AG 2011. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components B7959 1732.5 / 2132.5 MHz SAW Duplexer Data sheet Application ■ Low-loss SAW duplexer for mobile telephone W-CDMA Band 4 (UMTS) / CDMA 1x AWS systems Low insertion attenuation Low amplitude ripple Usable passband 45 MHz Single-ended to balanced transformation in Antenna-Rx path ■ Impedance transformation 50 Ω to 100 Ω in Antenna-Rx path ■ High isolation between Tx and Rx ■ ■ ■ ■ Features 5 6 7 8 4 9 3 2 0.4 0.4 0.55 0.3 Package size 2.5 * 2.0 * 0.89 mm3 RoHS compatible Approximate weight 0.017 g Package for Surface Mount Technology (SMT) Ni, Au-plated terminals Balanced Rx port, unbalanced Tx port Electrostatic Sensitive Device (ESD) Fully matched by integrated matching network Moisture Sensitive Level 3 bottom view 1 0.9 0.89 ■ ■ ■ ■ ■ ■ ■ ■ ■ side view 2.5 5 6 Pin configuration ■ ■ ■ ■ 3 1, 8 6 2, 4, 5, 7, 9 Tx input, unbalanced Rx output, balanced Antenna To be grounded Please read cautions and warnings and important notes at the end of this document. 2 1 8 2 4 2.0 3 February 11, 2011 7 top view SAW Components B7959 1732.5 / 2132.5 MHz SAW Duplexer Data sheet Characteristics for W-CDMA Band 4 Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = –15˚C to +80 ˚C ZTx = 50 Ω ZAnt = 50 Ω ZRx = 100 Ω (balanced) || 8.2nH Characteristics Tx-Antenna max. - typ. @ 25 ˚C 1732.5 - 1.6 1.8 dB - 0.3 0.5 dB - 0.5 2.0 % Input VSWR (Tx port) 1710.0 ... 1755.0MHz - 1.7 2.0 Output VSWR (Ant Port) 1710.0 ... 1755.0MHz - 1.6 2.0 30 39 37 40 45 40 45 20 38 43 32 20 20 20 37 43 41 48 51 50 50 43 42 47 35 32 23 25 - Center frequency min. fc Maximum insertion attenuation αW-CDMA1) @fCarrier 1712.4 ... 1752.6MHz Amplitude ripple (p-p) @fCarrier 1712.4 ... 1752.6MHz ∆αW-CDMA1) Error Vector Magnitude @fCarrier 1712.4 ... 1752.6MHz EVM2) Attenuation 10.0 728.0 851.0 1565.4 1573.3 1577.5 1597.5 1805.0 1930.0 @fCarrier 2112.4 2400.0 3410.0 5120.0 5725.0 1) 2) ... ... ... ... ... ... ... ... ... ... ... ... ... ... α 1565.4MHz 764.0MHz 894.0MHz 1573.3MHz 1577.5MHz 1585.5MHz 1605.9MHz 1880.0MHz 1990.0MHz 2152.6MHz αW-CDMA1) 2500.0MHz 3520.0MHz 5350.0MHz 5850.0MHz - MHz dB dB dB dB dB dB dB dB dB dB dB dB dB dB Attenuation of W-CDMA signal (Power Transfer Function). Please, refer to page 9 of this document. Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141 Please read cautions and warnings and important notes at the end of this document. 3 February 11, 2011 SAW Components B7959 1732.5 / 2132.5 MHz SAW Duplexer Data sheet Characteristics for W-CDMA Band 4 Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = –15 ˚C to +80 ˚C ZTx = 50 Ω ZAnt = 50 Ω ZRx = 100 Ω (balanced) || 8.2nH Characteristics Antenna-Rx min. max. - typ. @ 25 ˚C 2132.5 - 2.0 2.3 dB - 0.2 0.5 dB Input VSWR (Ant port) 2110.0 ... 2155.0MHz - 1.3 2.0 Output VSWR (Rx port) 2110.0 ... 2155.0MHz - 1.4 2.0 CMRR (|S32-S42|/|S32+S42|) 2110.0 ... 2155.0MHz 222) 25 - Center frequency fc Maximum insertion attenuation @fCarrier 2112.4 ... 2152.6MHz αW-CDMA1) Amplitude ripple (p-p) @fCarrier 2112.4 ... 2152.6MHz ∆αW-CDMA1) - MHz dB IMD product level limits3) at fTX=1732.5 MHz, fRX= 2132.5 MHz Blocker 1 400.0MHz Blocker 2 1332.5MHz Blocker 3 3865.0MHz Blocker 4 5597.5MHz 1) 2) 3) -130 -107 -117 -130 dBm dBm dBm dBm Attenuation of W-CDMA signal (Power Transfer Function). Please, refer to page 9 of this document. A combination of 10 ˚ phase balance and 1 dB amplitude balance corresponds to 19.6 dB CMRR IMD product level limits for power levels PTX=21.5 dBm (antenna port output power) and PBlocker=-15dBm (antenna port input power) Please read cautions and warnings and important notes at the end of this document. 4 February 11, 2011 SAW Components B7959 1732.5 / 2132.5 MHz SAW Duplexer Data sheet Characteristics for W-CDMA Band 4 Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = -15 ˚C to +80 ˚C ZTx = 50 Ω ZAnt = 50 Ω ZRx = 100 Ω (balanced) || 8.2nH Characteristics Antenna-Rx Attenuation 1.0 @fCarrier 1712.4 1755.0 2240.0 2400.0 2484.0 1) ... ... ... ... ... ... 1710.0 1752.6 2025.0 2400.0 2484.0 6000.0 α MHz MHz αW-CDMA1) MHz MHz MHz MHz min. typ. @ 25 ˚C max. 35 45 30 15 30 35 53 58 38 40 44 46 - dB dB dB dB dB dB Attenuation of W-CDMA signal (Power Transfer Function). Please, refer to page 9 of this document. Characteristics Tx-Rx min. typ. @ 25 ˚C max. Differential Mode Isolation 1574.0 ... 1577.0 1712.4 ... 1752.6 2112.4 ... 2152.6 3410.0 ... 3520.0 5120.0 ... 5275.0 α MHz MHz αW-CDMA1) MHz αW-CDMA1) MHz MHz 40 55 50 20 20 60 60 54 60 60 - dB dB dB dB dB Common Mode Isolation 1712.4 ... 1752.6 α MHz αW-CDMA1) 50 53 - dB 1) Attenuation of W-CDMA signal (Power Transfer Function). Please, refer to page 9 of this document. Please read cautions and warnings and important notes at the end of this document. 5 February 11, 2011 SAW Components B7959 1732.5 / 2132.5 MHz SAW Duplexer Data sheet Characteristics for CDMA 1x AWS Band Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = –30 ˚C to +85 ˚C ZTx = 50 Ω ZAnt = 50 Ω ZRx = 100 Ω (balanced) || 8.2nH Characteristics Tx-Antenna min. fc - typ. @ 25 ˚C 1732.5 Maximum insertion attenuation α 1710.00 ... 1755.00 MHz - 1.6 2.0 dB Amplitude ripple (p-p) ∆α 1710.00 ... 1755.00 MHz - 0.3 0.7 dB Input VSWR (Tx port) 1710.00 ... 1755.00 MHz - 1.7 2.0 Output VSWR (Ant Port) 1710.00 ... 1755.00 MHz - 1.6 2.0 30 39 37 40 45 40 45 20 38 43 32 20 20 20 37 43 41 48 51 50 50 43 42 47 35 32 23 25 - Center frequency max. - MHz α Attenuation 10.0 728.0 851.0 1565.4 1573.3 1577.5 1597.5 1805.0 1930.0 2110.0 2400.0 3410.0 5120.0 5725.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... 1565.4 764.0 894.0 1573.3 1577.5 1585.5 1605.9 1880.0 1990.0 2155.0 2500.0 3520.0 5350.0 5850.0 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz Please read cautions and warnings and important notes at the end of this document. 6 February 11, 2011 dB dB dB dB dB dB dB dB dB dB dB dB dB dB SAW Components B7959 1732.5 / 2132.5 MHz SAW Duplexer Data sheet Characteristics for CDMA 1x AWS Band Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = –30 ˚C to +85˚C ZTx = 50 Ω ZAnt = 50 Ω ZRx = 100 Ω (balanced) || 8.2nH Characteristics Antenna-Rx min. fc - typ. @ 25 ˚C 2132.5 Maximum insertion attenuation α 2110.00 ... 2155.00 MHz - 2.0 2.4 dB Amplitude ripple (p-p) ∆α 2110.00 ... 2155.00 MHz - 0.3 0.7 dB Input VSWR (Ant port) 2110.00 ... 2155.00 MHz - 1.3 2.0 Output VSWR (Rx port) 2110.00 ... 2155.00 MHz - 1.4 2.0 221) 25 - dB 35 45 30 15 30 35 53 58 38 40 44 46 - dB dB dB dB dB dB Center frequency CMRR (|S32-S42|/|S32+S42|) 2110.0 ... 2155.0 MHz - MHz α Attenuation 1.0 1710.0 1755.0 2240.0 2400.0 2484.0 1) max. ... ... ... ... ... ... 1710.0 1755.0 2025.0 2400.0 2484.0 6000.0 MHz MHz MHz MHz MHz MHz A combination of 10 ˚ phase balance and 1 dB amplitude balance corresponds to 19.6 dB CMRR Please read cautions and warnings and important notes at the end of this document. 7 February 11, 2011 SAW Components B7959 1732.5 / 2132.5 MHz SAW Duplexer Data sheet Characteristics for CDMA 1x AWS Band Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = –30 ˚C to +85 ˚C ZTx = 50 Ω ZAnt = 50 Ω ZRx = 100 Ω (balanced) || 8.2nH Characteristics Tx-Rx min. typ. @ 25 ˚C max. 40 55 50 20 20 60 59 54 60 60 - dB dB dB dB dB 50 53 - dB α Differential Mode Isolation 1574.0 ... 1577.0 1710.0 ... 1755.0 2110.0 ... 2155.0 3410.0 ... 3520.0 5120.0 ... 5275.0 MHz MHz MHz MHz MHz Common Mode Isolation 1710.0 ... 1755.0 MHz α Please read cautions and warnings and important notes at the end of this document. 8 February 11, 2011 SAW Components B7959 1732.5 / 2132.5 MHz SAW Duplexer Data sheet Annotation for characteristics section Attenuation of W-CDMA signal (Power Transfer Function, αW-CDMA) is determined by ∞ ∫–∞ Sds 21 ( f )HRRC ( f – f Carrier ) 2 df with fCarrier according to 3GPP TS 25.101 (e.g. for UMTS pass band, fCarrier ranges from 882.4 MHz (lowest Tx channel) to 912.6 MHz (highest Tx channel)). Here, HRRC(f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following normalization: ∞ ∫–∞ HRRC ( f ) Please read cautions and warnings and important notes at the end of this document. 9 2 df = 1 February 11, 2011 SAW Components B7959 1732.5 / 2132.5 MHz SAW Duplexer Data sheet Maximum Ratings Storage temperature range DC voltage ESD voltage Input power at 1710.0 ... 1755.0 MHz elsewhere 1) Tstg VDC VESD Pin Pin –40/+85 5 501) 29 10 ˚C V V dBm dBm machine model, 10 pulses } continuous wave 50 ˚C, 5000h According to JESD22-A115A (machine model), 10 negative and 10 positive pulses. Please read cautions and warnings and important notes at the end of this document. 10 February 11, 2011 SAW Components B7959 1732.5 / 2132.5 MHz SAW Duplexer Data sheet Frequency Response TX-ANT (PTF) Frequency Response TX-ANT (wideband) Please read cautions and warnings and important notes at the end of this document. 11 February 11, 2011 SAW Components B7959 1732.5 / 2132.5 MHz SAW Duplexer Data sheet Frequency Response ANT-RX (PTF) Frequency Response ANT-RX (wideband) Please read cautions and warnings and important notes at the end of this document. 12 February 11, 2011 SAW Components B7959 1732.5 / 2132.5 MHz SAW Duplexer Data sheet Frequency Response TX-RX (PTF) Differential Mode Frequency Response TX-RX (PTF) Common Mode Please read cautions and warnings and important notes at the end of this document. 13 February 11, 2011 SAW Components B7959 1732.5 / 2132.5 MHz SAW Duplexer Data sheet References Type B7959 Ordering code B39212B7959P810 Marking and package C61157-A3-A59 Packaging F61074-V8153-Z000 Date codes L_1126 S-parameters B7959_NB.s4p, B7959_WB.s4p see file header for port/pin assignment table Soldering profile S_6001 RoHS compatible Defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Moldability Before using in overmolding environment, please contact your EPCOS sales office. Matching coils See Inductor pdf-catalog http://www.tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2011. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 14 February 11, 2011 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 15 February 11, 2011