EVERLIGHT 19-237B-R6GHBHC-C01-2T

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
Full Color Chip LED
19-237B/R6GHBHC-C01/2T
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Multi-color type.
․Pb-free.
․The product itself will remain within RoHS
compliant version.
Descriptions
․The 19-237B SMD LED is much smaller
than lead frame type components, thus
enable smaller board size, higher packing
density, reduced storage space and finally
smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Revision
Type
Material
Emitted Color
R6
AlGaInP
Brilliant Red
GH
InGaN
Brilliant Green
BH
InGaN
Blue
Resin Color
Water Clear
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-937-C01
Prepared date: 15-Aug-2008
:2
LifecyclePhase:
Rev. 2
Page: 1 of 12
Prepared by : Ashley Kuo
Release Date:2008-09-20 00:15:58.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-237B/R6GHBHC-C01/2T
Package Outline Dimensions
1.6
Red
3
1
4
1.6
2
Blue
Green
1.1
0.35
1.0
0.8
2
3
4
1
0.55
0.55
0.35
0.55
4
0.55
1
2
0.8
3
2.4
Note: The tolerances unless mentioned is ±0.1mm,Unit = mm
Revision
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-937-C01
Prepared date: 15-Aug-2008
:2
LifecyclePhase:
Rev. 2
Page: 2 of 12
Prepared by : Ashley Kuo
Release Date:2008-09-20 00:15:58.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-237B/R6GHBHC-C01/2T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
R6:25
Forward Current
IF
GH:25
mA
BH:25
Peak Forward Current
(Duty 1/10 @1KHz)
R6:60
IFP
GH:100
mA
BH:100
R6:60
Power Dissipation
Pd
GH:110
mW
BH:110
R6:2000
Electrostatic Discharge (HBM)
ESD
GH:150
V
BH:150
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +90
℃
Soldering Temperature
Tsol
Reflow Soldering : 260 ℃ for 10 sec.
Revision
Hand Soldering : 350 ℃ for 3 sec.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-937-C01
Prepared date: 15-Aug-2008
:2
LifecyclePhase:
Rev. 2
Page: 3 of 12
Prepared by : Ashley Kuo
Release Date:2008-09-20 00:15:58.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-237B/R6GHBHC-C01/2T
Electro-Optical Characteristics (Ta=25℃)
Parameter
Luminous Intensity
Viewing Angle
Symbol
Iv
Min.
Typ.
Max.
R6
18
30
57
GH
28.5
60
112
BH
11.5
18
28.5
-----
120
-----
deg
-----
nm
2θ1/2
λp
GH
-----
λd
518
R6
613
GH
520
BH
465
627
----
△λ GH
VF
35
-----
-----
IR
R6
1.7
2.0
2.2
GH
2.6
3.0
3.3
BH
2.6
3.0
3.3
GH
IF=5mA
nm
35
V
10
R6
Reverse Current
nm
20
BH
Forward Voltage
535
475
R6
Spectrum Radiation
Bandwidth
mcd
468
BH
Dominant Wavelength
Condition
632
R6
Peak Wavelength
Unit
-----
-----
50
μA
VR=5V
50
BH
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.1V
Revision
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-937-C01
Prepared date: 15-Aug-2008
:2
LifecyclePhase:
Rev. 2
Page: 4 of 12
Prepared by : Ashley Kuo
Release Date:2008-09-20 00:15:58.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-237B/R6GHBHC-C01/2T
Typical Electro-Optical Characteristics Curves
R6
Forward Current vs.
Forward Voltage
Spectrum Distribution
Ta=25°C
Relative luminous intensity (%)
Forward Current FI (mA)
Ta=25°C
Forward Voltage V F (V)
Wavelength λ (nm)
Luminous Intensity vs.
Forward Current
Luminous Intensity vs.
Ta=25°C
Relative luminous intensity (% )
Relative luminous intensity (% )
Ambient Temperature
Ambient Temperature Ta (°C)
Radiation Diagram
Ta=25°C
Forward Current FI (mA)
Forward Current Derating Curve
Ambient Temperature Ta (°C)
Revision
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-937-C01
Prepared date: 15-Aug-2008
:2
LifecyclePhase:
Rev. 2
Page: 5 of 12
Prepared by : Ashley Kuo
Release Date:2008-09-20 00:15:58.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-237B/R6GHBHC-C01/2T
Typical Electro-Optical Characteristics Curves
GH
I (mA)
40
F
75
50
30
25
0
400
450
500
550
25
20
10
0
2.6
600
Luminous Intensity vs.
Relative luminous intensity (%)
Ambient Temperature
1000
100
10
1
-60 -40 -20
0
3.0
3.4
1000
f=1KHz
Duty=1/10
10
1
10
20 40 60 80 100
10
IF(mA)
Forward Current
10
Forward Current IF(mA)
Ta=25°C
Radiation Diagram
0°
50
10°
20°
30°
40
40°
30
25
1.0
20
0.9
50°
0.8
60°
10
70°
0.7
0
0
20
40
60
85
100
80°
90°
0.5
Ambient Temperature Ta (°C)
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-937-C01
Prepared date: 15-Aug-2008
LifecyclePhase:
4.5
100
Forward Current Derating Curve
:2
4.2
Luminous Intensity vs
Forward Current
Ta=25°C
Ambient Temperature Ta (°C)
Revision
3.8
Forward Voltage V F (V)
Wavelength λ (nm)
Relative luminous intensity (%)
Forward Current vs.
Forward Voltage
Ta=25°C
50
100
Forward Current
Relative luminous intensity (%)
Spectrum Distribution
Ta=25°C
0.3
0.1
0.2
0.4
Rev. 2
0.6
Page: 6 of 12
Prepared by : Ashley Kuo
Release Date:2008-09-20 00:15:58.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-237B/R6GHBHC-C01/2T
Typical Electro-Optical Characteristics Curves
BH
Forward Current vs.
Forward Voltage
Ta=25°C
100
75
50
25
0
400
450
500
550
40
30
25
20
10
0
2.6
600
Forward Current IF (mA)
4.2
Luminous Intensity vs.
Ambient Temperature
100
10
1
-60 -40 -20
0
1000
4.5
Ta=25°C
f=1KHz
Duty=1/10
100
20 40 60 80 100
10
1
10
1
10
10
2
Forward Current IF (mA)
Radiation Diagram
0° 10°
50
Ta=25°C
20°
30°
40
40°
30
25
1.0
0.9
50°
20
0.8
60°
10
0
70°
0.7
0
20
40
60
85
100
80°
90°
0.5
Ambient Temperature Ta (°C)
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-937-C01
Prepared date: 15-Aug-2008
LifecyclePhase:
3.8
Forward Current
Forward Current Derating Curve
:2
3.4
Luminous Intensity vs.
Ambient Temperature Ta (°C)
Revision
3.0
Forward Voltage VF (V)
Relative luminous intensity (%)
Relative luminous intensity (%)
Wavelength λ (nm)
1000
Ta=25°C
50
Forward Current IF (mA)
Relative luminous intensity (%)
Spectrum Distribution
0.3
0.1
0.2
0.4
Rev. 2
0.6
Page: 7 of 12
Prepared by : Ashley Kuo
Release Date:2008-09-20 00:15:58.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-237B/R6GHBHC-C01/2T
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Revision
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-937-C01
Prepared date: 15-Aug-2008
:2
LifecyclePhase:
Rev. 2
Page: 8 of 12
Prepared by : Ashley Kuo
Release Date:2008-09-20 00:15:58.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-237B/R6GHBHC-C01/2T
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Label
Revision
Aluminum moisture-proof bag
Desiccant
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-937-C01
Prepared date: 15-Aug-2008
:2
LifecyclePhase:
Label
Rev. 2
Page: 9 of 12
Prepared by : Ashley Kuo
Release Date:2008-09-20 00:15:58.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-237B/R6GHBHC-C01/2T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
Ac/Re
Items
Test Condition
1
Reflow Soldering
Temp. : 260℃±5℃
Min. 5sec.
6 Min.
22 PCS.
0/1
Temperature Cycle
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
300 Cycles
22 PCS.
0/1
Thermal Shock
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
300 Cycles
22 PCS.
0/1
Temp. : 100℃
1000 Hrs.
22 PCS.
0/1
Temp. : -40℃
1000 Hrs.
22 PCS.
0/1
2
3
High Temperature
Storage
Low Temperature
Storage
4
5
Revision
Test
Sample
Hours/Cycles
Size
No.
6
DC Operating Life
IF = 20 mA
1000 Hrs.
22 PCS.
0/1
7
High Temperature /
High Humidity
85℃/ 85%RH
1000 Hrs.
22 PCS.
0/1
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-937-C01
Prepared date: 15-Aug-2008
:2
LifecyclePhase:
Rev. 2
Page: 10 of 12
Prepared by : Ashley Kuo
Release Date:2008-09-20 00:15:58.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-237B/R6GHBHC-C01/2T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Revision
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-937-C01
Prepared date: 15-Aug-2008
:2
LifecyclePhase:
Rev. 2
Page: 11 of 12
Prepared by : Ashley Kuo
Release Date:2008-09-20 00:15:58.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-237B/R6GHBHC-C01/2T
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within
once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of the
hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Revision
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No. : DSE-937-C01
Prepared date: 15-Aug-2008
:2
LifecyclePhase:
Rev. 2
Page: 12 of 12
Prepared by : Ashley Kuo
Release Date:2008-09-20 00:15:58.0
Expired Period: Forever