SDI TRANSFORMER FT1513 The FT1513 SDI Transformer is small signal, wide band transformer with a 1:1 turns ratio tested to provide 1 kV isolation between primary and secondary windings whilst still passing SDI video signals with minimal effect on equaliser supported cable length. Lightning protection is included by recommended use of appropriate surge arrestor. Part Code FT1513 FT1513B Equivalent Cable Length ~ 75 metres of Belden 8281 ~ 150 metres of Belden 8281 Isolation Flash tested to 1kV To be confirmed Lightning protection RS 191-1541 surge arrestor RS 191-1541 surge arrestor Package DR00311A DR00361A Impedance 75 ohms 75 ohms © Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in t his publication are subject to change without notice Fara263s Page 1 of 2 Oct-05(C) PACKAGE DETAIL All dimensions in millimetres (inches). Gen Tolerance ± 0,05 (0.002) unless otherwise stated. Third Angle Projection DO NOT SCALE © Faraday Technology Ltd Croft Road Newcastle-U-Lyme ST5 0QZ England Tel (044) 01782 661501 Fax 630101 116 38 92 VIEW ON TOP CON 1 CON 2 Notes. Copy No: M 1 2 Change Note No; 4 Template: DT00361 5 Auth; A Mason Date: 07/01/03 Faraday Technology Ltd. Croft Road Industrial Estate, Newcastle, Staffordshire ST5 0QZ. England. Fara263s 3 Title: Date; 07/01/03 Drg No: SDI TRANSFORMER Tel: Fax: Email: Web site: Page 2 of 2 DR00361A A4DRG BLK.CDR 31 Con 1 = BNC In (f) Con 2 = BNC Output (f) Output Conn is an insulated BNC + 44 (0)1782 661501 + 44 (0)1782 630101 [email protected] http://www.faradaytech.co.uk Oct-05(C)