Illuminated Switches Illuminated Subminiature Pushbutton Switches HB Series (1.0) x (2.0)Typ .039 x .079 (0.3) Typ .012 M8P0.75 L(+) L(-) NO NC (7.4) Sq .291 (9.0) Sq .354 (0.5) (5.0) .020 .197 (10.0) .394 (15.5) (5.3) .610 .209 (1.3) .051 (3.5) .138 COM (1.8) .071 (2.54) Typ .100 2 3 1 (5.0) .197 (7.0) .276 (2.54) Typ .100 Latchdown Position HB15SKW01-5C-CB (1.0) x (2.0)Typ .039 x .079 (0.3) Typ .012 M8P0.75 L(+) L(-) NO NC (7.4) Dia .291 (9.0) Dia .354 (5.0) (0.5) .197 .020 (10.0) .394 (5.3) (15.5) .209 .610 (1.3) .051 (3.5) .138 COM (1.8) .071 (2.54) Typ .100 2 3 1 (5.0) .197 (7.0) .276 (2.54) Typ .100 Latchdown Position HB16CKW01-5C-CB CUTAWAY POLE & CIRCUITS Plunger Position Normal Pole Model SP HB15 HB16* Down Connected Terminals Normal Throw & Switch/Lamp Schematics Down Notes: Switch is marked withNO, NC, C, L. LED circuit is isolated and requires an external power source. ON ON (ON) ON 1 COM 1-3 1-2 (+) 3 SPDT NC 2 (-) NO When in latchdown position for the alternate circuit, cap positions above the housing are: 1.5mm for snap-in models & 7.0mm for PCB models. How to order: 1 2 General Specifications: 3 4 5 6 7 HB 1 1 2 5 6 3 S C 4 K 5 W01 6 POLE: SPDT CIRCUITS: ON-(ON) ON-ON (Alternate Action with Latchdown) SHAPES: Square Round HOUSING: Black CONTACTS & TERMINALS: Silver Contacts and Solder Lug Terminals 0.1A @ 30V AC/DC 5C 5D 5F 6B 6F 6G LED: Without LED (Non-Illuminated) Bright LED Red Bright LED Amber Bright LED Green Super Bright LED White Super Bright LED Green Super Bright LED Blue 1 [email protected] No code ELECTRICAL CAPACITY (Resistive Load) » Power Level (code W): 0.1A max.@ 30V AC/DC 7 CAP TYPES & COLORS: A B C E F G For Non-Illumination: Black (Square Only) White Red Yellow Green Blue OTHER RATINGS: » Contact Resistance: 50mȍ max. » Insulation Resistance: 100Mȍ min.@500VDC » Mechanical Life: 100,000 operations min. » Electrical Life: 50,000 operations min. » Norminal Operating Force: 3.43N » Contact Timing: Nonshorting (Break-before-make) » Travel: Pretravel: 2.2mm; Overtravel: 0.8mm; Total: 3.0mm MATERIALS CB DB FB JB For Bright LED (Lens/Diffuser): Black Cap/White Window for Spot Illuminaterd (Square Only) Red/White Amber/White Green/White Clear/White » Operating Temperature: -25°C through +50°C JB For Super Bright LED (Lens/Diffuser): Clear/White AB » Movable Contacts & Stationary Contacts: Phosphor bronze with silver plating » Terminals: Phosphor bronze with silver plating » Lamp Terminals: Phosphor bronze with silver plating ENVIRONMENTAL DATA SOLDERING » Manual Soldering: 4 seconds max. @ 390°C max. www.greatecs.com Illuminated Switches Illuminated Subminiature Pushbutton Switches HB Series SHAPES & PANEL CUTOUT S 9mm, Square C 9mm Round Recommemded Panel Thickness: 0.5 ~ 5.0 mm. Socket wrench AT110 may be used for mounting. Overtightening the mounting nut AT073 may damage the switch housing. The bezel is an integral part of the switch body. CAPS FOR NON-ILLUMINATED SWITCHES AT4035 AT4036 (7.4) Sq .291 (4.5) .177 (4.5) .177 (4.8) .189 CAPS FOR BRIGHT LEDs AT4052 Spot Illuminated (7.4) Dia .291 (4.8) .189 (8.0) Dia .315 AT4166 (1.8) .071 (7.4) Sq .291 (4.5) .177 (4.8) .189 Transparent Colored Lens (7.4) Dia .291 (7.4) Sq .291 (1.2) .047 (3.0) .118 (4.6) .181 (4.8) .189 AT4167 (4.5) .177 Translucent White Diffuser (4.8) .189 Colored LED CAPS FOR BRIGHT & SUPER BRIGHT LEDs AT4031 W01 AT4032 (7.4) Dia .291 (7.4) Sq .291 (4.5) .177 (4.8) .189 TERMINALS Solder Lug (5.0) .197 The 1.0x2.0mm oblong hole accommodates one solid or one stranded 20-gauge wire or two 22gauge wires. Solder lug terminals are spaced 2.54x5.08mm. This enables PCB mounting which can be accommplished by elongating PC board hole to 2.03mm. (4.5) .177 (4.8) .189 (2.0) .079 (1.8) .071 (1.0) .039 Thk = (0.3) .012 LED COLORS & SPECIFICATIONS Super Bright Bright Bright AT633 (+) (-) 5C Red 5D Amber 5F Green 6B White 6F Green 6G Blue Unit 30 30 25 30 30 30 mA Super Bright Forward Peak Current IFM AT624G (Blue) Continuous Forward Current IF 20 20 20 20 20 20 mA Forward Voltage VF 1.85 2.0 2.2 3.6 3.5 3.6 V Reverse Peak Voltage VRM 5 5 5 5 5 5 V 0.40 0.42 0.38 0.50 0.50 0.50 mA/°C AT629B (White) AT630F (Green) Current Reduction Rate Above 25°C ¨IF T-1 Bi-pin Ambient Temperature Range -25 ~ +50 °C The electrical specifications shown are determined at a basic temperature of 25°C. LED circuit is isolated and requires external power source. Single element LED is colored in OFF state. If the source voltage exceeds the rated voltage, a ballast resistor is required. ASSEMBLY INSTRUCTIONS Cap Removal LED Polarity & Orienation in Lamp Socket D Flat AT624 AT629 AT630 Black Dot (+) Lamping Tool Lamping Tool AT111 may be used to remove and replace LED. 2 [email protected] (+) (–) AT633 (–) Top View of Switch Anode (+) AT111 Cap Replacement Cathode (–) AT110 Socket Wrench Socket Wrench AT110 may be used to tighten the mounting nut. www.greatecs.com