HB Indicators Complement to HB Pushbuttons TYPICAL INDICATOR ORDERING EXAMPLE HB 01 K W01 5C HOUSING SHAPES K 01 Square CB TERMINALS W01 Silver Solder Lug Black 02 Round DESCRIPTION FOR TYPICAL ORDERING EXAMPLE LEDS CAP TYPES & COLORS Bright LED Cap: Lens/Diffuser Color 5C Red CB Red/White 5D Amber DB Amber/White 5F Green FB Green/White JB Clear/White HB01KW01-5C-CB Red Lens and White Diffuser with Red, Bright LED Square Shape Black Housing Super Bright Silver Solder Lug Terminals 6B White 6F Green 6G Blue LED Cap: Lens/Diffuser Color JB Clear/White LED COLORS & SPECIFICATIONS The electrical specifications shown are determined at a basic temperature of 25°C. LED circuit is isolated and requires external power source. Single element LED is colored in OFF state. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. Bright AT633 Super Bright AT624G Blue AT629B White AT630F Green T-1 Bi-pin Note for Super Bright: Bright Attention Electrostatic Sensitive Devices Super Bright 5C 5D 5F 6B 6F 6G Color Red Amber Green White Green Blue Unit Forward Peak Current IFM 30 30 25 30 30 30 mA Continuous Forward Current IF 20 20 20 20 20 20 mA Forward Voltage VF 1.85 2.0 2.2 3.6 3.5 3.6 V Reverse Peak Voltage VRM 5 5 5 5 5 5 V Current Reduction Rate Above 25°C ∆IF 0.40 0.42 0.38 0.50 0.50 0.50 mA/°C (+) (-) Ambient Temperature Range –25° ~ +50°C –25° ~ +50°C NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 HB Indicators Complement to HB Pushbuttons CAP TYPES & COLORS Colored Cap for Bright LEDs AT4168 Square Lens/Diffuser Colors Available: CB AT4169 Round (7.4) Dia .291 (7.4) Sq .291 Red/White (4.5) .177 DB Amber/White FB Green/White Transparent Colored Lens Translucent White Diffuser (4.5) .177 (4.8) .189 (4.8) .189 Material: Polycarbonate Colored LED AT633 Finish: Glossy White Cap for Bright & Super Bright LEDs JB Clear Lens/ White Diffuser AT4033 Square Material: Polycarbonate Finish: Glossy Transparent Clear Lens AT4034 Round Translucent White Diffuser (7.4) Dia .291 (7.4) Sq .291 (4.5) .177 (4.5) .177 (4.8) .189 Colored LEDs AT624, AT629, AT630, or AT633 (4.8) .189 TYPICAL INDICATOR DIMENSIONS Square M8P0.75 (7.4) Sq .291 (9.0) Sq .354 (3.5) .138 (5.0) .197 (10.0) .394 (5.3) (15.5) .209 .610 (1.0) x (2.0) .039 x .079 (1.8) .071 L(+) (0.5) .020 L(-) (0.3) Typ .012 (5.0) .197 (8.0) Dia .315 Recommended Panel Thickness: .020” ~ .197” (0.5 ~ 5.0mm) (5.08) .200 HB01KW01-5C-CB Round M8P0.75 (7.4) Dia .291 (9.0) Dia .354 (3.5) .138 (5.0) .197 (10.0) .394 (5.3) (15.5) .209 .610 (1.0) x (2.0) .039 x .079 (1.8) .071 L(+) (0.5) .020 (5.0) .197 L(-) (0.3) Typ .012 (5.08) .200 (8.0) Dia .315 Recommended Panel Thickness: .020” ~ .197” (0.5 ~ 5.0mm) HB02KW01-5C-CB NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07