GULFSEMI 1N4007G-1

1N4007G-1
GLASS PASSIVATED
JUNCTION RECTIFIER
VOLTAGE: 1000V
CURRENT: 1.0A
FEATURE
DO – 41\DO – 204AL
Molded case feature for auto insertion
High current capability
Low leakage current
High surge capability
High temperature soldering guaranteed
250°C /10sec/0.375" lead length at 5 lbs tension
Glass Passivated chip
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
Maximum Average Forward Rectified
Current 3/8" lead length at Ta =75°C
Peak Forward Surge Current 8.3ms single
Half sine-wave superimposed on rated load
Maximum Instantaneous Forward Voltage at
rated forward current
Maximum full load reverse current
full cycle at TL =75°C
Maximum DC Reverse Current
Ta =25°C
at rated DC blocking voltage
Ta =100°C
Reverse Recovery Time Range
Typical Junction Capacitance
(Note 1)
(Note 2)
Typical Thermal Resistance
(Note 3)
Storage and Operation Junction Temperature
SYMBOL
Vrrm
Vrms
Vdc
1N4007G-1
1000
700
1000
units
V
V
V
If(av)
1.0
A
Ifsm
30.0
A
Vf
1.1
V
Ir(av)
30.0
µA
Ir
5.0
50.0
µA
Trr
900~1300
nS
Cj
R(ja)
Tstg, Tj
15.0
50.0
-55 to +150
pF
°C /W
°C
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 0.375" lead length, P.C. Board Mounted
Rev.A1
www.gulfsemi.com
RATINGS AND CHARACTERISTIC CURVES 1N4007G-1
1
1
Rev.A1
www.gulfsemi.com