1N5399-E GENERAL PURPOSE PLASTIC RECTIFIER VOLTAGE: 1000V CURRENT: 1.5A FEATURE DO-15\DO-204AC Molded case feature for auto insertion High current capability Low leakage current High surge capability High temperature soldering guaranteed 250°C/10sec/0.375”lead length at 5 lbs tension Halogen Free MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Halogen Free Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL 1N5399-E units * Maximum Recurrent Peak Reverse Voltage Vrrm 1000 V * Maximum RMS Voltage Vrms 700 V * Maximum DC blocking Voltage Vdc 1000 V * Maximum Average Forward Rectified Current 3/8”lead length at Ta =25°C Peak Forward Surge Current 8.3ms single Half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at 1.5A Maximum full load reverse current full cycle at TL =70°C Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Typical Junction Capacitance (Note 1) If(av) 1.5 A Ifsm 50.0 A Vf 1.4 V Ir(av) 300.0 µA * * * * Typical Thermal Resistance * (Note 2) Storage and Operation Junction Temperature Ir Cj Rth(ja) Rth(jl) Tj, Tstg 10.0 200.0 15.0 50.0 25.0 -50 to +150 µA pF °C/W °C Note: 1. Measured at 1.0 MHz and applied voltage of 4.0Vdc 2. Thermal Resistance from Junction to Ambient and from Junction to Lead at 0.375”lead length, P.C. Board Mounted * JEDEC Registered value Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES 1N5399-E Rev.A1 www.gulfsemi.com