T-1-3/4 Double Height, Right-Angle LED Assembly Interlocking G75XB Series 4.8±.5 6.2 7.6 D * 2.54 Typical hole pattern on a nominal pitch of 6.2 mm. D* nominally 4.8 or 5.0 mm depending on lamp type. 2.5 3.5 min 2.54 5.2 11.1±.3 0.5 1t + G752B 2.54 Anode 12.7 1 Red or yellow Anode Green Anode – (Pinout for single color) 2t 3t ... Nt ... Nb G75NB 1b 2b 3b (typ for bi-color) Specify part desired as follows: G75NB/Order Code 1t + Order Code 2t + ... + Order Code Nt + Order Code 1b + Order Code 2b+ ... + Order Code Nb For example: ”G752B/2I+2G” designates an assembly with 2 red LEDs on the two top positions and 2 green LEDs on the two bottom positions. Recommend that N<= 8 for handling ease. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Typical Characteristics Peak Vf (V) Iv (mcd) 2Θ1/2 λ (nm) @If=20mA @If=10mA (Deg) Recom. Op. If (mA) Epoxy & Type Color Order Code Red H 697 2.1 2.0 36 5-10 TInted Diffused Resistor Required Hi Eff Red I 635 2.0 9.0 36 10-20 Green G 565 2.1 9.0 36 10-20 Yellow Y 585 2.0 7.0 36 10-20 Tinted Transparent High Brightness Tinted Diffused For 2mA Operation Tinted Diffused 5V Operation Tinted Diffused 12V Operation White Diffused Bipolar, Bicolor Hi Eff Red IT 635 2.0 30 16 10-20 Green GT 565 2.1 30 16 10-20 Yellow YT 585 2.0 28 16 10-20 Red H2 697 2.0 1.6 @ 2mA 36 2-10 Hi Eff Red I2 635 2.1 2.0 @ 2mA 36 2-10 Green G2 565 2.0 2.0 @ 2mA 36 2-10 Yellow Y2 585 2.0 2.0 @ 2mA 36 2-10 Hi Eff Red I5 635 - 4.5 36 5V Green G5 565 - 4.5 36 5V Yellow Y5 585 - 4.5 36 5V Hi Eff Red IB 635 - 4.5 36 12 V Green GB 565 - 4.5 36 12 V Yellow YB 585 - 4.5 36 12 V Hi Eff Red/Grn EG 635/565 2.1/2.0 2.5/2.5 54 10-20 Yellow/Green YG 585/565 2.1/2.0 2.5/2.5 54 10-20 Red/Green SG 660/570 1.8/2.2 6.0/2.5 - 10-20 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A A-40