T-1 LED Indicator, Right-angle, PCB Mount G946B Series www.ledidea.com The G946B is made up of 2 T-1 LED lamps assembled into a black plastic holder. The leads are formed at right angles to the light emitting side of the assembly for through hole mounting on PCBs. The design of the G946B holder maintains all external dimensions but will be cored in appropriate places to minimize sink marks. Material of the housing is black Nylon 6/6 with fiber, rated UL94V0. Please note that the dimensions are in inches. .14 .19 max Pin Connection: .28 .125 max + – (typ for single color) .600 .85 max Green Anode .55 Red or yellow Anode (typ for bi-color) .15 .12 min + .150 .15 .100 .45 Specify part desired as follows: G946B/Order Code LED1 + Order Code LED 2 For example: “G946B/H+G” designates a red LED on top with a green LED below. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type TInted Diffused Resistor Required Tinted Transparent High Brightness Tinted Diffused For 2mA Operation Tinted Diffused 5V Operation White Diffused Bipolar, Bicolor Typical Characteristics Color Order Code λ (nm) @If=20mA @If=10mA (Deg) Recom. Op. If (mA) Hi Eff Red I 635 2.0 10 60 10-20 10-20 Peak Vf (V) Iv (mcd) 2Θ1/2 Green G 565 2.1 10 60 Yellow Y 585 2.0 10 60 10-20 Orange O 610 2.0 10 60 10-20 Hi Eff Red IT 635 2.0 40 40 10-20 Green GT 565 2.1 40 40 10-20 Yellow YT 585 2.0 40 40 10-20 Hi Eff Red I2 635 2.0 1.0 @ 2mA 60 2-10 Green G2 565 2.1 1.0 @ 2mA 60 2-10 Yellow Y2 585 2.0 1.0 @ 2mA 60 2-10 Hi Eff Red I5 635 - 10 60 5V Green G5 565 - 10 60 5V Yellow Y5 585 - 10 60 5V 10-20 Red/Green EG 635/565 2.0/2.1 4/4 90 Yellow/Green YG 585/565 2.0/2.1 4/4 90 10-20 Red/Yellow EY 635/585 2.0/2.0 4/4 90 10-20 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 2005G