TECHNICAL DATA IL1085-XX 3A LOW DROPOUT POSITIVE REGULATOR Features • Output Current : 3A • Maximum Input Voltage : 7V • Adjustable Output Voltage or Fixed 1.5V, 1.8V, 2.5V, 2.85V, 3.3V, 3.6V, 5.0V • Current Limiting and Thermal Protection • Standard 3-Pin Power Packages Applications • Post Regulator for Switching DC/DC Converter • High Efficiency Liner Regulators • Battery Charger Absolute Maximum Ratings (Note 1) Symbol Tstg Top Parameter Storage Temperature Range Operating Junction Temperature Range (Note 3) Value -65 to +150 -10 to +125 Unit °C °C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied. Power Dissipation (Note 2) Internally Limited Block Diagram Rev. 00 IL1085-xx Electrical Characteristics Typicals and limits appearing in normal type apply for Tj= +25°C. Limits appearing in Boldface type apply over the entire junction temperature range for operation. Rev. 00 IL1085-xx Electrical Characteristics Typicals and limits appearing in normal type apply for Tj= +25°C. Limits appearing in Boldface type apply over the entire junction temperature range for operation. NOTES 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Rating indicate conditions for which the device is intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics. NOTES 2: Power Dissipation is kept in a safe range by current limiting circuitry. Refer to Overload Recovery in Application Notes. NOTES 3: The maximum power dissipation is a function of Tj(MAX), ΘjA and TA . The maximum allowable power dissipation at any ambient temperature is PD=(Tj(MAX) – TA)ΘjA. NOTES 4: Typical Values represent the most likely parametric norm NOTES 5: All limits are guaranteed by testing or statistical analysis NOTES 6: IFULL LOAD is defind in the current limit curves . The IFULL LOAD curve defines the current limit as a function of inputto-output voltage . NOTES 7: Load and Line regulation are measured at constant junction temperature , and are guaranteed up to the maximum power dissipation of 30W.Power dissipation is determined by the input/output differential and the output current. Guaranteed maximum power dissipation will not be available over the full input/output range. NOTES 8: Dropout voltage is specified over the full output current range of the device. Rev. 00 IL1085-xx Typical Applications Adjusting Output Voltage Regulator with Reference Rev. 00 IL1085-xx Rev. 00 IL1085-xx Rev. 00