IP9005 5-CH MOTOR DRIVE IC DESCRIPTIONS IP9005 is a 5-CH motor driver for CD-P/VCDP/DVDP systems. It is composed of 2-CH BTL driver with 2input OPAMP, 2-CH BTL driver and 1-CH forward/ reverse controlled DC motor driver. FEATURES ORDER INFORMATION - 2-CH BTL driver. - 2-CH BTL driver with input OPAMP. - 1-CH forward/reverse controlled DC motor driver. - Built-in TSD (thermal shut down) circuit. - Built-in mute circuit. - Built-in power save circuit. - Operating supply voltage (4.3V~13.2V). * L : Lead Free * TF : Tape & Reel packing * L-TF : Lead Free and Tape & Reel packing June. 2005 (Rev. 5) 28SSOPH-375B Device Package Operating Temp IP9005 28SSOPH-375A -35OC ~ +85OC IP9005-TF 28SSOPH-375A -35OC ~ +85OC IP9005L 28SSOPH-375A -35OC ~ +85OC IP9005L-TF 28SSOPH-375A -35OC ~ +85OC IP9005 28SSOPH-375B -35OC ~ +85OC IP9005-TF 28SSOPH-375B -35OC ~ +85OC IP9005L 28SSOPH-375B -35OC ~ +85OC IP9005L-TF 28SSOPH-375B -35OC ~ +85OC www.interpionsemi.com -1- IP9005 5-CH MOTOR DRIVE IC PIN CONNECTIONS PIN DESCRIPTIONS NO SYMBOL I/O 1 FWD I 2 REV 3 NO SYMBOL I/O Loading motor forward input 15 VO4+ O CH4 driver output(+) I Loading motor reverse input 16 VO4- O CH4 driver output(-) CTL I Loading motor speed control 17 VO3+ O CH3 driver output(+) 4 PS I Power save 18 VO3- O CH3 driver output(-) 5 IN1 I CH1 input 19 GND - Ground 6 IN2 I CH2 input 20 PVCC2 - Power supply 2 7 SVCC - Signal power supply 21 MUTE I Mute 8 PVCC1 - Power supply 1 22 OPOUT3 O CH3 OPAMP output 9 VOL- O Loading driver output(-) 23 IN3- I CH3 OPAMP input (-) 10 VOL+ O Loading driver output(+) 24 IN3+ I CH3 OPAMP input (+) 11 VO2- O CH2 driver output(-) 25 OPOUT4 O CH4 OPAMP output 12 VO2+ O CH2 driver output(+) 26 IN4- I CH4 OPAMP input (-) 13 VO1- O CH1 driver output(-) 27 IN4+ I CH4 OPAMP input (+) 14 VO1+ O CH1 driver output(+) 28 BIAS I Bias June. 2005 (Rev. 5) DESCRIPTION www.interpionsemi.com DESCRIPTION -2- IP9005 5-CH MOTOR DRIVE IC ABSOLUTE MAXIMUM RATINGS CHARACTERISTICS SYMBOL VALUE UNIT Maximum supply voltage VCCmax 15 V Power dissipation Pd 2.3 * W Operating temperature Topr -35 ~ +85 O Storage temperature Tstg -55 ~ 150 O C C Note> 1. When mounted on 50mm X 50mm X 1mm PCB (Phenolic resin material). 2. Power dissipation reduces 18.4 mW/OC for using above Ta=25OC 3. Do not exceed Pd and SOA. Power Dissipation (mW) POWER DISSIPATION CURVE 3 2 1 0 25 50 75 100 125 150 175 Ambient Temperature (°C) RECOMMENDED OPERATING CONDITIONS CHARACTERISTICS SYMBOL VALUE UNIT Signal supply Voltage SVCC 4.3 ~ 13.2 V Power supply Voltage 1 PVCC1 4.3 ~ SVCC V Power supply Voltage 2 PVCC2 4.3 ~ SVCC V June. 2005 (Rev. 5) www.interpionsemi.com -3- IP9005 5-CH MOTOR DRIVE IC ELECTRICAL CHARACTERISTICS (SVCC=12.0V,PVCC1=PVCC2=5V, RL=8ohm, Bias=1.65V, Ta = 25OC unless otherwise specified.) CHARACTERISTICS SYMBOL CONDITIONS MIN TYP MAX UNIT Quiescent circuit current Icc No Load - 23 34 mA Power save on current Ips Pin5=GND - 0.5 2.0 mA Power save on voltage Vpson Pin5=sweep - - 0.5 V Power save off voltage Vpsoff Pin5=sweep 2.0 - - V Output offset voltage Voos Vin=Vref -80 - +80 mV Maximum output voltage Voms RL=8 ohm 3.6 4.0 - V Closed-loop voltage gain Avfs Vin=0.1Vrms, f=1kHz 17 19 21 dB [ BTL DRIVE PART ] Mute on voltage Vmon Pin21=sweep - - 0.5 V Mute off voltage Vmoff Pin21=sweep 1.5 - - V Mute pin current Imp Pin21=5.0V 200 300 uA Bias pin current Ibias Pin28=2.5V 80 120 uA 0.5 - 10 V - - 300 nA [ CH3, CH4 INPUT OPAMP PART ] Common mode input range Input bias current Vicm Ib Vbias=4.0V - High level output voltage Vohop Pin28=6.0V 11.5 - - V Low level output voltage Volop Pin28=6.0V - - 0.5 V Output source current Isrc - 1 - - mA Output sink current Isnk - 1 - - mA Slew rate Srop 100KHz pulse, Vout=2.0Vpp - 1.0 - V/uS June. 2005 (Rev. 5) www.interpionsemi.com -4- IP9005 5-CH MOTOR DRIVE IC ELECTRICAL CHARACTERISTICS (SVCC=12.0V,PVCC1=PVCC2=5V, RL=8ohm, Bias=1.65V, Ta = 25OC unless otherwise specified.) CHARACTERISTICS SYMBOL CONDITIONS MIN TYP MAX UNIT [LOADING DRIVER PART] Input high level voltage Vih - 1.5 - - V Input high level voltage Vil - - - 0.5 V FWD/REV pin current Iin Pin1=Pin2=5.0V - 200 300 uA Maximum output voltage Vo RL=25 ohm 9.0 10 - V Voltage gain Gvf Pin3=sweep 7 9 11 dB June. 2005 (Rev. 5) www.interpionsemi.com -5- IP9005 5-CH MOTOR DRIVE IC TYPICAL APPLICATION CIRCUIT 1 June. 2005 (Rev. 5) www.interpionsemi.com -6- IP9005 5-CH MOTOR DRIVE IC TYPICAL APPLICATION CIRCUIT 2 June. 2005 (Rev. 5) www.interpionsemi.com -7- IP9005 5-CH MOTOR DRIVE IC TYPICAL APPLICATION CIRCUIT 3 June. 2005 (Rev. 5) www.interpionsemi.com -8- IP9005 5-CH MOTOR DRIVE IC ELECTRICAL CHARACTERISTICS CURVES Icc vs. Vcc ICC(mA) 35 30 SVcc=PVcc1=PVcc2 25 20 15 10 5 0 6 8 10 12 14 Vcc(V) Icc vs. Temp Icc(mA) 32 28 24 20 16 12 8 -25 0 25 50 75 100 Temp June. 2005 (Rev. 5) www.interpionsemi.com -9- IP9005 5-CH MOTOR DRIVE IC ELECTRICAL CHARACTERISTICS CURVES (Continued) Vom vs. Vcc (CH1,2) Vom(V) 8 Vref=2.5V, Vin=5V 6 4 2 0 6 8 10 12 14 Vcc(V) Vom vs. Vcc (CH3,4) Vom(V) 8 Vref=2.5V, Vin=5V 6 4 2 0 6 8 10 12 14 Vcc(V) June. 2005 (Rev. 5) www.interpionsemi.com - 10 - IP9005 5-CH MOTOR DRIVE IC ELECTRICAL CHARACTERISTICS CURVES (Continued) Avf vs. Vcc(CH1,2) Avf(dB) 30 28 26 24 22 20 18 16 14 12 10 6 8 10 12 14 Vcc(V) Avf vs. Vcc(CH3,4) Avf(dB) 30 28 26 24 22 20 18 16 14 12 10 6 8 10 12 14 Vcc(V) June. 2005 (Rev. 5) www.interpionsemi.com - 11 - IP9005 5-CH MOTOR DRIVE IC ELECTRICAL CHARACTERISTICS CURVES (Continued) Vom(CH1,2) vs. Temp Icc(mA) 10 8 6 4 2 0 -25 0 25 50 75 100 Temp Vom(CH3,4) vs. Temp Icc(mA) 10 8 6 4 2 0 -25 0 25 50 75 100 Temp June. 2005 (Rev. 5) www.interpionsemi.com - 12 - IP9005 5-CH MOTOR DRIVE IC ELECTRICAL CHARACTERISTICS CURVES (Continued) Gvf (Loading) vs. Temp Gvf(dB) 12 11 10 9 8 7 6 5 -25 0 25 50 75 100 Temp June. 2005 (Rev. 5) www.interpionsemi.com - 13 - IP9005 5-CH MOTOR DRIVE IC PACKAGE DIMENSION(28SSOPH-375A) June. 2005 (Rev. 5) www.interpionsemi.com - 14 - IP9005 5-CH MOTOR DRIVE IC PACKAGE DIMENSION(28SSOPH-375B) June. 2005 (Rev. 5) www.interpionsemi.com - 15 -