MCO 450 ITRMS = 750 A ITAV = 464 A VRRM = 2000-2200 V High Power Single Thyristor Module VRSM VRRM VDSM VDRM V V 2100 2300 2000 2200 3 Type 5 4 3 2 2 Test Conditions ITRMS ITAV TVJ = TVJM TC = 85°C; 180° sine ITSM TVJ = 45°C VR = 0 Maximum Ratings 750 464 A A t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 15000 16000 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 13000 14400 A A TVJ = 45°C VR = 0 t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 1125000 1062000 A2s A2s TVJ = TVJM VR = 0 t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 845000 813000 A2s A2s 100 A/ms Features ● ● ● ● ● TVJ = TVJM repetitive, IT = 960 A f = 50 Hz, tP = 200 ms VD = 2/3 VDRM IG = 1 A, non repetitive, IT = ITAVM diG/dt = 1 A/ms A/ms 1000 V/ms PGAV VRGM 120 60 30 10 W W W V TVJ TVJM Tstg -40...130 130 -40...125 °C °C °C 3000 3600 V~ V~ (dv/dt)cr TVJ = TVJM; VDR = 2/3 VDRM RGK = ¥; method 1 (linear voltage rise) PGM TVJ = TVJM IT = ITAVM 50/60 Hz, RMS IISOL £ 1 mA Md Mounting torque (M6) Terminal connection torque (M8) Typical including screws Weight ● tP = 30 ms tP = 500 ms VISOL ● ● 500 t = 1 min t=1s Direct copper bonded Al2O3 -ceramic with copper base plate Planar passivated chips Isolation voltage 3600 V~ UL applied Keyed gate/cathode twin pins Applications ● (di/dt)cr 4 MCO 450-20io1 MCO 450-22io1 Symbol I2t 5 ● Motor control, soft starter Power converter Heat and temperature control for industrial furnaces and chemical processes Lighting control Solid state switches Advantages ● ● Improved temperature and power cycling Reduced protection circuits 4.5-7/40-62 Nm/lb.in. 11-13/97-115 Nm/lb.in. 650 g 030 Data according to IEC 60747 refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions © 2000 IXYS All rights reserved 1-4 MCO 450 Symbol Test Conditions IRRM TVJ = TVJM; VR = VRRM VT IT VT0 rT 600 A; TVJ = 25°C 40 V For power-loss calculations only (TVJ = TVJM) 0.77 0.42 V mW VGT VD = 6 V; IGT VD = 6 V; 2 3 300 400 V V mA mA VGD IGD TVJ = TVJM; VD = 2/3 VDRM TVJ = TVJM; VD = 2/3 VDRM 0.25 10 V mA IL TVJ = 25°C; VD = 6 V; tP = 30 ms diG/dt = 1 A/ms; IG = 1 A 400 mA IH TVJ = 25°C; VD = 6 V; RGK = ¥ 300 mA tgd TVJ = 25°C; VD = 1/2 VDRM diG/dt = 1 A/ms; IG = 1A 2 ms tq TVJ = TVJM; VR = 100 V; VD = 2/3 VDRM; tP = 200 ms dv/dt = 50 V/ms; IT = 500 A; -di/dt = 10 A/ms typ. 350 ms RthJC RthJK DC current DC current TVJ TVJ TVJ TVJ = 25°C = -40°C = 25°C = -40°C Creep distance on surface Strike distance in air Maximum allowable acceleration 10 mA 1.15 dS dA a = Characteristic Values V 1: IGT, TVJ = 130°C 2: IGT, TVJ = 25°C 3: IGT, TVJ = -40°C VG 3 2 6 5 1 4 1 4: PGM = 20 W 5: PGM = 60 W 6: PGM = 120 W IGD, TVJ = 130°C 0.1 10-3 10-2 10-1 100 101 A IG 102 Fig. 1 Gate trigger characteristics 100 TVJ = 25°C 0.072 0.096 12.7 9.6 50 K/W K/W mm mm m/s2 Optional accessories for modules Keyed Gate/Cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red UL 758, style 1385, File E 38136, Type ZY 180 L (L = Left for pin pair 4/5) CSA class 5851, guide 460-1-1, appl. 41234 µs tgd typ. Limit 10 1 0.01 0.1 A 1 10 IG Dimensions in mm (1 mm = 0.0394") © 2000 IXYS All rights reserved Fig. 2 Gate trigger delay time 2-4 MCO 450 107 14000 800 VR = 0V 2 ITSM It A DC 180° sin 120° 60° 30° ITAVM 700 12000 A 2 As 50 Hz 80 % VRRM TVJ = 45°C TVJ = 130°C 10000 600 500 8000 106 400 6000 TVJ = 45°C 300 TVJ = 130°C 4000 200 2000 100 105 0 0.001 0.01 s 0.1 1 0 1 ms t t Fig. 4 I2t versus time (1-10 ms) Fig. 3 Surge overload current ITSM: Crest value, t: duration 1000 Ptot W RthKA K/W 0.03 0.07 0.12 0.2 0.3 0.4 0.6 800 600 DC 180° sin 120° 60° 30° 400 10 0 25 50 75 100 125 °C 150 TC Fig. 5 Maximum forward current at case temperature Fig. 6 Power dissipation versus onstate current and ambient temperature 200 0 0 200 400 600 800 A 0 25 50 75 100 ITAVM 4000 W 3500 125 °C 150 TA RthKA K/W 0.01 0.02 0.03 0.045 0.06 0.08 0.12 Ptot 3000 2500 2000 Fig. 7 Three phase rectifier bridge: Power dissipation versus direct output current and ambient temperature 1500 Circuit B6 6xMCO450 1000 500 0 0 300 600 900 1200 A 0 IdAVM © 2000 IXYS All rights reserved 25 50 75 100 125 °C 150 TA 3-4 MCO 450 4000 W 3500 Ptot Fig. 8 Three phase AC-controller: Power dissipation versus RMS output current and ambient temperature RthKA K/W 0.01 0.02 0.03 0.045 0.06 0.08 0.12 3000 2500 2000 1500 Circuit W3 6xMCO450 1000 500 0 0 300 600 900 A 0 25 50 75 100 125 °C 150 TA IRMS 0.12 Fig. 9 Transient thermal impedance junction to case K/W 0.10 RthJC for various conduction angles d: ZthJC d 0.08 DC 180° 120° 60° 30° 0.06 30° 60° 120° 180° DC 0.04 0.072 0.0768 0.081 0.092 0.111 Constants for ZthJC calculation: 0.02 i 0.00 10-3 RthJC (K/W) 10-2 10-1 100 101 s 102 t 0.14 1 2 3 4 Rthi (K/W) ti (s) 0.0035 0.0186 0.0432 0.0067 0.0054 0.098 0.54 12 Fig.10 Transient thermal impedance junction to heatsink K/W 0.12 ZthJK RthJK for various conduction angles d: 0.10 d DC 180° 120° 60° 30° 0.08 0.06 30° 60° 120° 180° DC 0.04 0.02 10-2 10-1 100 s 101 t © 2000 IXYS All rights reserved 0.096 0.1 0.105 0.116 0.135 Constants for ZthJK calculation: i 0.00 10-3 RthJK (K/W) 102 1 2 3 4 5 Rthi (K/W) ti (s) 0.0035 0.0186 0.0432 0.0067 0.024 0.0054 0.098 0.54 12 12 4-4