SDB1060D Schottky Barrier Rectifier LOW FORWARD DROP VOLTAGE SCHOTTKY RECTIFIER Features Low forward voltage drop Low power loss and High efficiency Low leakage current High surge capability Pin Configuration Pin 1, 3: Anode Pin 2, 4: Cathode “Green” device and RoHS compliant device TO-252 TO-252 Applications High efficiency SMPS Product Characteristics Output rectification High frequency switching IF(AV) 10A Freewheeling VRRM 60V VFM at 125℃ 0.55V IFSM 120A DC-DC converter systems Description The SDB1060D is ideally suited for a full wave output rectifier in low switching power supplies, inverters and as free wheeling diodes. Ordering Information Device Marking Code Package Packaging SDB1060D SDB1060D TO-252 Tape & Reel Marking Information SDB1060D = Specific Device Code YWW = Year & Week Code Marking -. Y = Year Code -. WW = Week Code KSD-D6O003-002 1 SDB1060D Absolute Maximum Ratings (Limiting Values) Characteristic Symbol Value Unit Maximum repetitive reverse voltage Maximum working peak reverse voltage Maximum DC blocking voltage VRRM VRWM VR 60 V Maximum average forward rectified current IF(AV) 10 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load per diode IFSM 120 A Storage temperature range Tstg -45℃ to +150℃ ℃ Maximum operating junction temperature TJ 150 ℃ Symbol Value Unit Rth(j-c) 4.0 ℃/W Thermal Characteristics Characteristic Maximum thermal resistance junction to case Electrical Characteristics Characteristic Symbol VFM (1) Peak forward voltage drop IRM (1) Reverse leakage current Junction capacitance Cj Test Condition Min. Typ. Max. Unit Tj=25℃ - 0.55 0.65 V Tj=125℃ - 0.50 0.55 V Tj=25℃ - - 1.5 mA Tj=125℃ - - 200 mA - 400 - pF IFM = 10A VR = VRRM VR = 4VDC, f=1MHz Note : (1) Pulse test : tP≤380 ㎲, Duty cycle≤2% To evaluate the conduction losses use the following equation: PF = 0.35 IF(AV) + 0.019 IF2(RMS) IFM Forward Voltage : VFM = Vto + rd IFM 2 IF(AV) rd Conduction Loss : PF = Vto IF(AV) + rd IF2(RMS) IF(AV) VFM Vto KSD-D6O003-002 2 SDB1060D Rating and Characteristic Curves Fig. 1) Typical Forward Characteristics Fig. 2) Typical Reverse Characteristics Fig. 3) Maximum Forward Derative Curve Fig. 4) Forward Power Dissipation Fig. 5) Maximum Non-Repetitive Peak Forward Surge Current Fig. 6) Typical Junction Capacitance KSD-D6O003-002 3 SDB1060D Θ Package Outline Dimension Θ Θ Θ ※ Recommended Land Pattern (Unit: mm) 2.50 7.00 7.00 1.50 4.60 KSD-D6O003-002 4 SDB1060D The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-D6O003-002 5