MEANWELL GS18U18-P1J

GS18U
15~18W AC-DC Single Output Wall-mounted type
series
Features :
Universal AC input / Full range
No load power consumption<0.3W
ErP step2 compliant
NRCan compliant
Meet EISA 2007 (Energy Independence and Security Act)
2 pole USA plug
Class
power (without earth pin)
Protections: Short circuit / Overload / Over voltage
Fully enclosed plastic case
LED indicator for power on
Approvals: UL / CUL / BSMI / CB / FCC
Pass LPS
2 years warranty
SPECIFICATION
GS18U05-P1J GS18U07-P1J GS18U09-P1J GS18U12-P1J GS18U15-P1J GS18U18-P1J GS18U24-P1J GS18U28-P1J GS18U48-P1J
ORDER NO.
SAFETY MODEL NO.
DC VOLTAGE
OUTPUT
GS18U05
Note.2 5V
GS18U07
GS18U09
GS18U12
GS18U15
GS18U18
GS18U24
GS18U28
GS18U48
7.5V
9V
12V
15V
18V
24V
28V
48V
RATED CURRENT
3.0A
2.0A
2.0A
1.50A
1.20A
1.0A
0.75A
0.64A
0.375A
CURRENT RANGE
0 ~ 3.0A
0 ~ 2.0A
0 ~2.0A
0 ~ 1.50A
0 ~ 1.20A
0 ~ 1.0A
0 ~ 0.75A
0 ~ 0.64A
0 ~ 0.375A
RATED POWER (max.)
15W
15W
18W
18W
18W
18W
18W
18W
18W
80mVp-p
80mVp-p
80mVp-p
100mVp-p
150mVp-p
180mVp-p
240mVp-p
240mVp-p
RIPPLE & NOISE (max.) Note.3 50mVp-p
VOLTAGE TOLERANCE Note.4
5.0%
5.0%
5.0%
3.0%
3.0%
3.0%
2.0%
2.0%
2.0%
LINE REGULATION
Note.5
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
LOAD REGULATION
Note.6
5.0%
5.0%
5.0%
3.0%
3.0%
3.0%
2.0%
2.0%
2.0%
SETUP, RISE, HOLD UP TIME 500ms, 20ms, 50ms/230VAC
VOLTAGE RANGE
90 ~ 264VAC 135 ~ 370VDC
FREQUENCY RANGE
INPUT
79.5%
AC CURRENT
INRUSH CURRENT (max.)
0.5A / 100VAC
OVERLOAD
PROTECTION
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
SAFETY & WITHSTAND VOLTAGE
EMC
ISOLATION RESISTANCE
(Note. 7)
EMC EMISSION
OTHERS
CONNECTOR
NOTE
47 ~ 63Hz
EFFICIENCY (Typ.)
LEAKAGE CURRENT(max.)
82%
83%
85%
85%
85%
86%
86.5%
87%
25A / 115VAC
0.25mA / 240VAC
110 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
105 ~ 150% rated output voltage
Protection type : Clamp by zener diode, output short
0 ~ +50 (Refer to "Derating Curve")
20% ~ 90% RH non-condensing
-20 ~ +85 , 10 ~ 95% RH
0.03% / (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, CSA C22.2, BSMI,CNS14336 approved
I/P-O/P:4242VDC
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH
Compliance to FCC PART 15 / CISPR22 class B, CNS13438 class B
PACKING
PLUG
500Khrs min. MIL-HDBK-217F(25
79*54*33mm (L*W*H)
210g ; 60pcs / 13.5kg / CARTON
See page2
CABLE
See page2
MTBF
DIMENSION
500ms, 20ms, 15ms/115VAC at full load
)
1.All parameters are specified at 115VAC input, rated load, 25 70% RH ambient.
2.DC voltage: The output voltage set at point measure by plug terminal & 50% load.
3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
4.Tolerance: includes set up tolerance, line regulation, load regulation.
5.Line regulation is measured from low line to high line at rated load.
6.Load regulation is measured from 20% to 100% rated load
7.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the
EMC directives.
File Name:GS18U-SPEC 2012-02-29
GS18U
15~18W AC-DC Single Output Wall-mounted type
Mechanical Specification
series
Unit:mm
17
UL1185 16AWG 1230 50mm for 5V~12V
UL1185 18AWG 1830 50mm for 15V~48V
70 10mm
POWER LED
C"+"
11 0.5mm
ID 2.1 x OD 5.5
NAME PLATE
Plug Assignment
33
79
Standard plug: P1J
54
P1J
OUTPUT
CENTER
+
Static Characteristics
Derating Curve
100
100
LOAD (%)
LOAD (%)
P/N
70
0
10
20
30
Ta (
40
)
50
80
60
0
50
60
70
80
90 100
260
INPUT VOLTAGE
File Name:GS18U-SPEC 2012-02-29