GS18A 18W AC-DC Industrial Adaptor series ■ Features : Universal AC input / Full range No load power consumption<0.3W Energy efficiency Level Ⅴ Comply with EISA 2007, NRCan, AU/NZ MEPS and EU ErP 3 pole AC inlet IEC320-C14 Class I power (with earth pin) Protections: Short circuit / Overload / Over voltage Pass LPS Fully enclosed plastic case LED indicator for power on 2 years warranty (for 5V~28V only) SPECIFICATION GS18A05-P1J GS18A07-P1J GS18A09-P1J GS18A12-P1J GS18A15-P1J GS18A18-P1J GS18A24-P1J GS18A28-P1J GS18A48-P1J ORDER NO. SAFETY MODEL NO. DC VOLTAGE OUTPUT GS18A05 Note.2 5V GS18A07 GS18A09 GS18A12 GS18A15 GS18A18 GS18A24 GS18A28 GS18A48 7.5V 9V 12V 15V 18V 24V 28V 48V RATED CURRENT 3.0A 2.0A 2.0A 1.50A 1.20A 1.0A 0.75A 0.64A 0.375A CURRENT RANGE 0 ~ 3.0A 0 ~ 2.0A 0 ~2.0A 0 ~ 1.50A 0 ~ 1.20A 0 ~ 1.0A 0 ~ 0.75A 0 ~ 0.64A 0 ~ 0.375A RATED POWER (max.) 15W 18W 15W 18W 18W 18W 18W 18W 18W RIPPLE & NOISE (max.) Note.3 50mVp-p 80mVp-p 80mVp-p 80mVp-p 100mVp-p 150mVp-p 180mVp-p 240mVp-p 240mVp-p VOLTAGE TOLERANCE Note.4 ±5.0% ±5.0% ±5.0% ±3.0% ±3.0% ±3.0% ±2.0% ±2.0% ±2.0% LINE REGULATION Note.5 ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% LOAD REGULATION Note.6 ±5.0% ±5.0% ±5.0% ±3.0% ±3.0% ±3.0% ±2.0% ±2.0% ±2.0% 86% 86.5% 87% SETUP, RISE, HOLD UP TIME 500ms, 20ms, 50ms/230VAC 90 ~ 264VAC 135 ~ 370VDC VOLTAGE RANGE FREQUENCY RANGE INPUT 79.5% AC CURRENT INRUSH CURRENT (max.) 0.5A / 100VAC 83% 85% 85% 85% 45A / 230VAC 0.75mA / 240VAC OVERLOAD 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 135% rated output voltage Protection type : Clamp by zener diode, output short 0 ~ +50℃ (Refer to "Derating Curve") 20% ~ 90% RH non-condensing -20 ~ +85℃, 10 ~ 95% RH WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note. 7) EMC EMISSION EMC IMMUNITY NOTE 82% LEAKAGE CURRENT(max.) OVER VOLTAGE CONNECTOR 47 ~ 63Hz EFFICIENCY (Typ.) PROTECTION OTHERS 500ms, 20ms, 15ms/115VAC at full load ±0.03% / ℃ (0 ~ 40℃) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, CSA C22.2, TUV EN60950-1, BSMI CNS14336, CCC GB4943, PSE J60950-1(5~28V only) approved I/P-O/P:4242VDC , I/P-FG:2121VDC I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55022 Class B, EN61000-3-2,3, FCC PART 15 / CISPR22 class B, CNS13438 class B, GB9254, GB17625.1 Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A PACKING PLUG 500Khrs min. MIL-HDBK-217F(25℃) 93*54*36mm (L*W*H) 230g ; 60pcs / 15kg / CARTON See page 2 ; Other type available by customer requested CABLE See page 2 ; Other type available by customer requested MTBF DIMENSION 1.All parameters are specified at 230VAC input, rated load, 25℃ 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 20% to 100% rated load. 7.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) File Name:GS18A-SPEC 2015-05-20 GS18A 18W AC-DC Industrial Adaptor Mechanical Specification series Unit:mm UL1185 16AWG 1230±50mm for 5~12V UL1185 18AWG 1830±50mm for 15~48V 70±10mm POWER LED C"+" 11±0.5mm ID 2.1 x OD 5.5 Outside NAME PLATE Inside -V not connected to AC FG Plug Assignment 36 93 Standard plug: P1J 54 P1J Derating Curve P/N OUTPUT CENTER + Static Characteristics 100 90 LOAD (%) LOAD (%) 100 70 80 70 60 50 40 0 10 20 30 40 AMBIENT TEMPERATURE (℃) 50 90 95 100 110 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:GS18A-SPEC 2015-05-20