HSP-250 250W Single Output with PFC Function series Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 High efficiency up to 87% Protections: Short circuit / Overload / Over voltage / Over temperature Forced air cooling by built-in DC fan 1U low profile 41mm Conformal coated Built-in cooling fan ON-OFF control Built-in remote sense function 3 years warranty SPECIFICATION MODEL OUTPUT HSP-250-2.5 HSP-250-3.6 HSP-250-5 DC VOLTAGE 2.5V 3.6V 5V RATED CURRENT 50A 50A 50A CURRENT RANGE 0 ~ 50A 0 ~ 50A 0 ~ 50A RATED POWER 125W 180W 250W RIPPLE & NOISE (max.) Note.2 100mVp-p 100mVp-p 100mVp-p VOLTAGE ADJ. RANGE 3.24 ~ 3.96V 2.0% 4.5 ~ 5.5V 2.0% 2.3 ~ 2.8V VOLTAGE TOLERANCE Note.3 2.0% LINE REGULATION 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% SETUP, RISE TIME 3000ms, 50ms/230VAC HOLD UP TIME (Typ.) 16ms/230VAC VOLTAGE RANGE Note.5 85 ~ 264VAC 47 ~ 63Hz FREQUENCY RANGE INPUT POWER FACTOR (Typ.) PF>0.95/230VAC EFFICIENCY (Typ.) 79% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.5A/115VAC 35A/115VAC LEAKAGE CURRENT <1.2mA / 240VAC OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE FUNCTION FAN CONTROL WORKING TEMP. 3000ms, 50ms/115VAC at full load 16ms/115VAC at full load 120 ~ 370VDC PF>0.98/115VAC at full load 83% 0.75A/230VAC 70A/230VAC 87% 2A/115VAC 1A/230VAC 2.8A/115VAC 1.4A/230VAC 105 ~ 135% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 4.14 ~ 4.86V 5.75 ~ 6.75V 2.88 ~ 3.38V Protection type : Shut down o/p voltage, re-power on to recover 80 5 (TSW2) detect on heatsink of power transistor ; 8 0 5 (TSW1) detect on heatsink of output transistor Protection type : Shut down o/p voltage, recovers automatically after temperature goes down RTH3 60 10 Fan on ; RTH3 40 10 Fan off -40 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & EMC (Note 4) ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT OTHERS / 70% RH EMS IMMUNITY Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, EN61000-6-2, heavy industry level, criteria A MTBF 179.7K hrs min. DIMENSION 199*105*41mm (L*W*H) 0.97Kg;16pcs/16.5Kg/0.87CUFT PACKING NOTE UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC MIL-HDBK-217F (25 ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:HSP-250-SPEC 2010-09-27 HSP-250 250W Single Output with PFC Function Mechanical Specification Unit:mm 18 12.5 Case No.980B series 4-M4 L=6 150 27.5 199 150 27.5 1 2 9.5 3 5 FAN 6 8 9 27.5 150 Remote Sense (CN100) : JST B-XH or equivalent 14max. Mating Housing Terminal JST XHP or equivalent JST SXH-001T or equivalent 18 41 Assignment +S -S 12.5 Pin No. 1 2 12 CN100 Pin No. Assignment 4,5,6 DC OUTPUT -V 7,8,9 DC OUTPUT +V Assignment AC/L AC/N FG 4-M4 L=5 LED SVR Air flow direction 27.5 8 7 Terminal Pin No. Assignment Pin No. 1 2 3 50 105 125 4 4-M4 L=6 Block Diagram I/P +S ACTIVE INRUSH CURRENT LIMITING EMI FILTER RECTIFIERS & PFC POWER SWITCHING O.T.P. O.L.P. PFC CONTROL PWM CONTROL RECTIFIERS & FILTER +V -V -S DETECTION CIRCUIT FG Derating Curve O.V.P. Output Derating VS Input Voltage 100 100 90 80 80 70 50 LOAD(%) LOAD (%) 60 40 20 -40 0 10 20 30 40 50 AMBIENT TEMPERATURE ( ) 60 70 (HORIZONTAL) 60 50 40 85 90 100 115 130 145 165 185 205 225 245 264 INPUT VOLTAGE (V) 60Hz File Name:HSP-250-SPEC 2010-09-27