150W U-Bracket Single Output with PFC Function USP-150 series Features : Universal AC input / Full range(up to 295VAC) Built in active PFC function Constant Voltage design High efficiency up to 93% Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection U-bracket low profile:33mm ZVS technology to reduce power dissipation 3 years warranty SPECIFICATION MODEL DC VOLTAGE USP-150-12 USP-150-15 USP-150-24 USP-150-36 USP-150-48 12V 15V 24V 36V 48V 10A 6.3A 4.2A 3.2A 0 ~ 10A 150W 150mVp-p 13.5~16.5V 0 ~ 6.3A 151.2W 150mVp-p 21.6~26.4V 0 ~ 4.2A 151.2W 250mVp-p 32.4~39.6V 153.6W 250mVp-p RATED CURRENT OUTPUT 12.5A CURRENT RANGE 0 ~ 12.5A RATED POWER 150W RIPPLE & NOISE (max.) Note.2 100mVp-p VOLTAGE ADJ. RANGE 11.0~13.2V VOLTAGE TOLERANCE Note.3 2.0% LINE REGULATION 0.5% 1.0% LOAD REGULATION VOLTAGE RANGE INPUT 16ms/230VAC 0.5% 0.5% 0.5% 1.0% 1.0% 1.0% 1.0% PF 0.96/230VAC 91.5% AC CURRENT (Typ.) 2A/115VAC INRUSH CURRENT (Typ.) LEAKAGE CURRENT Cold start 65A/230VAC <2mA / 240VAC 110~160% rated output power WORKING TEMP WORKING HUMIDITY VIBRATION SAFETY STANDARDS PF 0.98/115VAC at full load 93% 91.5% 93% 93% 1A/230VAC Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed 41.4 ~ 48.6V 26.7 ~ 32.4V 13.6 ~ 16.3V 17 ~ 21V Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery 100 5 (RTH2) Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 53 ~ 64.8V -30 ~ +65 (Refer to output load derating curve) 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85 TEMP. COEFFICIENT 3000ms, 100ms/115VAC at full load 16ms/115VAC at full load 127 ~ 417VDC Note.4 90 ~ 295VAC EFFICIENCY (Typ.) OVER TEMPERATURE (Note 5) 0.5% 47 ~ 63Hz PROTECTION OVER VOLTAGE EMC 2.0% POWER FACTOR (Typ.) SHORT CIRCUIT SAFETY & 2.0% FREQUENCY RANGE OVERLOAD 43.2~52.8V 2.0% 2.0% 2000ms, 100ms/230VAC SETUP, RISE TIME HOLD UP TIME (Typ.) 0 ~ 3.2A 0.03%/ , 10 ~ 95% RH (0 ~ 60 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes Design refer to IEC60950-1,EN60950-1,UL60950-1 WITHSTAND VOLTAGE Note.6 I/P-O/P:3.0KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25 / 70%RH EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT EMS IMMUNITY Compliance to EN61000-3-2,EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level (surge 4KV), criteria A MTBF 216.3K hrs min. OTHERS DIMENSION PACKING 215*67.4*33mm (L*W*H) 0.48kg; 24PCS/12.5kg/0.61CUFT MIL-HDBK-217F (25 ) NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltages. Please check the static characteristics for more details. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 6. Please remove the component D1 before conducted Hipot test. File Name:USP-150-SPEC 2011-03-25 USP-150 150W U-Bracket Single Output with PFC Function Mechanical Specification Case No. 988 series Unit:mm 6.5 4.5 4PL 194 208 3.5 3.5 215 211 201 33 7.62 CN1 2 3 1 2 3 4 52 62.7 67.4 CN2 1 3.5 4PL AC Input Connector (CN1) :SVH-21T-P1.1 or equivalent Pin No. 1 2 3 Assignment FG AC/L AC/N Mating Housing JST VHR or equivalent DC Terminal pin NO. Assignment (CN2) Terminal JST SVH-21T-P1.1 or equivalent Pin No. 1,2 3,4 Assignment VV+ Terminal DECA T21-BM10-04 Block Diagram EMI FILTER I/P BRIDGE RECTIFIERS APFC CONTROLLER POWER SWITCHING SYNCHRONOUS RECTIFIERS & FILTER +V -V O.T.P. FG O.L.P. Derating Curve 100 Mount with a 300*500*2mm heatsink 90 100 80 80 100VAC 60 70 230VAC LOAD(%) LOAD (%) O.V.P. Static Characteristics 130 40 20 -30 DETECTION CIRCUIT PWM CONVERTER 60 50 40 0 10 20 30 40 45 50 55 60 65 AMBIENT TEMPERATURE ( ) 70 (HORIZONTAL) 90 100 110 135 155 230 295 INPUT VOLTAGE (V) 60Hz File Name:USP-150-SPEC 2011-03-25