Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 9233851520 Item: MK23-85-C-1 Magnetic properties Conditions Min Typ Pull-In excitation (Reference value) measured in coil- "define operation" Test-Coil Reed switch unmodified Pull-In excitation (modified contact) phys. conditioned tolerance of +/- 1 AT Test-Coil Reed switch modified Pull-In in milliTesla (modified conta phys. caused tolerance +/- 0,1mT Contact-No. Contact-form Contact-material Contact rating Switching voltage Switching current Carry current Unit Max Unit KMS-01 KMS-01 Conditions Contact Data 85 Max Min Typ 85 A Rhodium ! "# not to exceed their individual max.'s DC or Peak AC DC or Peak AC Pulsed carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage (<20 AT) Operate time incl. bounce Release time Capacitance Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature $ " % & !' 100% Duty Cycle % & !' 5ms after coil excitation for 50ms max. Measured with 40% overdrive Maximum value 1,5 ms after excitation RH <45 %, 100 V test voltage ( ( )( " $ measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch *+ Conditions Min Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Max Unit , , - . wave soldering max. 5 sec. Modifications in the sense of technical progress are reserved Designed at: 29.06.09 Designed by: AKELLER Approval at: 29.06.09 Approval by: RKAMP Last Change at: 09.07.09 Last Change by: AKELLER Approval at: 15.07.09 Approval by: RKAMP Version: 02