MEDER MK23-85-F-1

Europe: +49 / 7731 8399 0
| Email: [email protected]
Item No.:
USA:
+1 / 508 295 0771
| Email: [email protected]
Asia:
+852 / 2955 1682
| Email: [email protected]
9233853035
Item:
MK23-85-F-1
Magnetic properties
Conditions
Min
Typ
Pull-In excitation (Reference value) measured in coil- "define operation"
Test-Coil
Reed switch unmodified
Pull-In excitation (modified contact) phys. conditioned tolerance of +/- 1 AT
Test-Coil
Reed switch modified
Pull-In in milliTesla (modified conta phys. caused tolerance +/- 0,1mT
Contact-No.
Contact-form
Contact-material
Contact rating
Switching voltage
Switching current
Carry current
Unit
Max
Unit
KMS-01
KMS-01
Conditions
Contact Data 85
Max
Min
Typ
85
A
Rhodium
! "
#$
not to exceed their individual max.'s
DC or Peak AC
DC or Peak AC
Pulsed carry current
Contact resistance static
Contact resistance dynamic
Insulation resistance
Breakdown voltage (30-40 AT)
Operate time incl. bounce
Release time
Capacitance
Environmental data
Shock
Vibration
Operating temperature
Storage temperature
Soldering temperature
%
#
& ' "(
100% Duty Cycle
& ' "(
5ms after coil excitation for 50ms max.
Measured with 40% overdrive
Maximum value 1,5 ms after excitation
RH <45 %, 100 V test voltage
according to IEC 255-5
measured with 40% overdrive
measured with no coil excitation
@ 10 kHz across open switch
Conditions
)
)
*)
#
%
+,
Min
Typ
1/2 sine wave duration 11ms
from 10 - 2000 Hz
Max
Unit
.
.
.
wave soldering max. 5 sec.
Modifications in the sense of technical progress are reserved
Designed at:
Last Change at:
10.07.09
Designed by:
Last Change by:
AKELLER
Approval at:
Approval at:
10.07.09
Approval by:
Approval by:
RKAMP
Version:
01