MEDER MK24-A-1_11

Europe: +49 / 7731 8399 0
| Email: [email protected]
Item No.:
USA:
+1 / 508 295 0771
| Email: [email protected]
Asia:
+852 / 2955 1682
| Email: [email protected]
9240000010
Item:
MK24-A-1
Magnetic properties
Conditions
Min
Pull-In excitation (modified contact) phys. conditioned tolerance of +/- 1 AT
Test equipment
Testing 100%
Pull-In in milliTesla (modified conta phys. caused tolerance +/- 0,1mT
Contact rating ( < 10 AT )
Switching voltage
Switching current (< 10 AT)
Carry current (< 10 AT)
Contact resistance static(<10AT)
Insulation resistance
Breakdown voltage (< 10 AT)
Operate time incl. bounce (<10AT)
Release time
Capacity
Special Product Data
Shock
Vibration
Operating temperature
Storage temperature
Soldering Temperature Tsold
Washability
Min
Typ
Max
DC or Peak AC
DC or Peak AC
DC or Peak AC
Unit
%&
Start value
#
!
#
' ( & &(
RH <45 %, 100 V test voltage
according to IEC 255-5
measured with 40% overdrive
measured with no coil excitation
@ 10 kHz across open switch
$
)$
!
*
+,
Conditions
Min
Typ
Max
Unit
Max
Unit
yes
Conditions
Min
Typ
1/2 sine, duration 11ms, in 3 axis
from 10 - 2000 Hz
Reflow according IPC/JEDEC J-STD-0
Conditions
General data
Unit
!"
not to exceed their individual max.'s
Reach / RoHS conformity
Environmental data
Max
KMS11+AP66
Conditions
Contact data 04
Typ
fully sealed
Min
Remark
Packaging
Typ
.
.
.
#
#
*
Max
Unit
Pick & place force should not exceed 25cN!
T&R per 2000 pcs. / Tray H20
Modifications in the sense of technical progress are reserved
Designed at:
30.06.09
Designed by:
THAUKE
Approval at:
03.11.09
Approval by:
JHEYDER
Last Change at:
08.04.11
Last Change by:
THAUKE
Approval at:
11.04.11
Approval by:
JHEYDER
Version:
6