1000Base-T Dual Port Module ELECTRONICS INC. EPG4017F & EPG4017F-RC • Dual Port Interface for Gigabit Applications • SMD Package designed for Reflow Process • Complies with or exceeds IEEE 802.3, ANSI X3.263 Standards • Add “-RC” after part number for RoHS Compliant • 1500 Vrms Isolation Electrical Parameters @ 25° C PCA Part Number(s) OCL (µH Min.) Insertion Loss (dB Max.) EPG4017F EPG4017F-RC @ 100 KHz, 0.1 Vrms 8 mA DC Bias 1-65 MHz See Notes Below 350 (Cable Side) -1 Return Loss (dB Min.) CMRR (dB Min.) 65-100 MHz 100-125 MHz 1-40 MHz 60 MHz 80 MHz 100 MHz 1-80 MHz -1.1 -1.5 -18 -15 -12 -12 -30 • Rise Time : 2.5 nSec. Typ. • Package .075 (1.91) .040 (1.02) 1.090 (27.69) PCA EPG4017F(-RC) Date Code .430 (10.92) .300 (7.62) Solder Pad Layout Cable Side 1, 4, 7, 10 48,45,42,39 2, 5, 8, 11 49,46,43,40 3, 6, 9, 12 50,47,44,41 Chip Side Cable Side .030 (.762) Pin 1 I.D. .330 (8.38) .018 (.457) Schematic Chip Side .030 (.762) .040 (1.016) .960 (24.38) .065 (1.65) .380 (9.65) .440 (11.18) Notes : 1. Lead Finish 14,17,20,23 37,34,31,28 15,18,21,24 36,33,30,27 16,19,22,25 35,32,29,26 EPG4017F EPG4017F-RC SnPb Hot Tin Dip (Sn) † 2. Peak Temperature Rating (per IPC/JEDEC J-STD-020C) 225°C 3. Moisture Sensitive Levels (per IPC/JEDEC J-STD-020C) MSL = 3 (168 Hours, ≤30°C/60%RH) 4. Weight (Tube) 5. Packaging Information (*Add “TR” to end of part number, but (Tape & Reel) in front of “-RC”when placing order) 245°C MSL = 4 (72 Hours, ≤30°C/60%RH) 5.50 grams 5.50 grams 18 pieces/tube 350 pieces/13” reel 18 pieces/tube 350 pieces/13” reel (*EPG4017FTR) (*EPG4017FTR-RC) † Lead Material : Matte Tin with Ni Barrier Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSFG4017F & -RC Rev. 3 1/4/07 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com