1000Base-T Module ELECTRONICS INC. EPG4001AS & EPG4001AS-RC • Complies with or exceeds IEEE 802.3ab 1000Base-T • Guaranteed to operate with 10/100Base-TX • 1500 Vrms Isolation • RoHS Compliant • Autotransformer for Enhanced EMI Performance Electrical Parameters @ 25° C OCL (µH Min.) Insertion Loss (dB Max.) Return Loss (dB Min.) CMRR (dB Min.) Common to Differential (dB Min.) Crosstalk (dB Min.) @ 100 KHz, 0.1 Vrms 8 mA DC bias 1-65 MHz 65-100 MHz 100-125 MHz 1-40 MHz 60 MHz 80 MHz 100 MHz 1-80 MHz 1 MHz 30 MHz 50 MHz 100 MHz 1-40 MHz 60 MHz 100 MHz 350 (Media Side) -1 -1.1 -1.5 -18 -15 -12 -10 -30 -60 -40 -35 -30 -40 -35 -30 • Rise Time : 1.75 nS Max. • Impedance : 100 Ω • Package Schematic 1, 4, 7, 10 .690 (17.53) .090 (2.29) .050 (1.27) .070 (1.78) PCA EPG4001AS(-RC) Date Code 2, 5, 8, 11 23, 20, 17, 14 3, 6, 9, 12 Pad Layout .670 (17.02) .480 (12.19) 24, 21, 18, 15 1CT:1CT 22, 19, 16, 13 Pin 1 I.D. .550 (13.97) .030 (.762) .010/.015 (.254/.381) .260 (6.60) .008/.013 (.203/.305) 0°-8° .035 (.889) .016/.022 (.406/.559) .050 ((1.27) .600 (15.24) Notes : 1. Lead Finish EPG4001AS EPG4001AS-RC SnPb Hot Tin Dip (Sn) † 2. Peak Temperature Rating 225°C 3. Moisture Sensitive Levels MSL = 3 (168 Hours, ≤30°C/60%RH) 4. Weight (Tube) 5. Packaging Information (*Add “TR” to end of part number, but (Tape & Reel) in front of “-RC”when placing order) 245°C MSL = 4 (72 Hours, ≤30°C/60%RH) 3.18 grams 3.18 grams 30 pieces/tube 350 pieces/13” reel 30 pieces/tube 350 pieces/13” reel (*EPG4001ASTR) (*EPG4001ASTR-RC) † Lead Material : Matte Tin with Ni Barrier Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSFG4001AS & -RC Rev. C2 5/2/13 BJW TEL: (818) 892-0761 FAX: (818) 894-5791 www.pca.com