10Base-T Quad SMT Module with Common Mode Choke ELECTRONICS INC. EPE6224S & EPE6224S-RC • Complies with or exceeds IEEE 802.3, 10Base-T Standards • Add “-RC” after part number for RoHS Compliant • Operating Temperature : 0°C to 70°C Electrical Parameters @ 25° C OCL (µH Typ.) Insertion Loss (dB Max.) Return Loss (dB Min.) Trannsmit CMRR (dB Min.) 100 KHz, 0.1 Vrms 1-10 MHz 5-10 MHz 1-10 MHz 50 MHz 100 MHz 200 MHz 5-10 MHz 135 -1.0 -20 -50 -35 -25 -15t -50 • Hipot : Pri. to Sec. 1500 Vrms Crosstalk (dB Min.) • Package Schematic 1.120 (28.45) .090 (2.29) .050 (1.27) PCA EPE6224S(-RC) Date Code 40 .480 (12.19) .670 (17.02) Receive Chip Side 1,6,11,16 Cable Side 40,35,30,25 21 Solder Pad Layout 1 2,7,12,17 1:1 ± 5% 20 39,34,29,24 Transmit .950 (24.13) .040 (1.02) 3,8,13,18 38,33,28,23 4,9,14,19 37,32,27,22 0°-10° .050 (.127) .210/.220 (5.33/5.59) .050 (1.27) .018/.022 (.457/.559) 5,10,15,20 36,31,26,21 1CT:1CT ± 5% 0°-8° .045 (1.14) .008/.012 (.203/.305) .625 (15.88) Notes : EPE6224S 1. Assembly Process (Solder Composition) SnPb EPE6224S-RC Pb-Free + (RoHS exemption 7a) 2. Peak Solder Rating 225°C (per IPC/JEDEC J-STD-020C) 3. Moisture Sensitive Levels (MSL) MSL = 3 (168 Hours, ≤30°C/60%RH) (per IPC/JEDEC J-STD-020C) 4. Weight 5. Packaging Information (*Add “TR” to end of part number when placing order) (Tube) (Tape & Reel) 260°C MSL = 4 (72 Hours, ≤30°C/60%RH) TBD grams TBD grams TBD pieces/tube TBD pieces/13” reel TBD pieces/tube TBD pieces/13” reel (*EPE6224S-TR) (*EPE6224S-RCTR) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSE6224S & -RC Rev. 4 2/6/06 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com