10/100Base-TX Module for Quad-Port Applications ELECTRONICS INC. EPF8034S & EPF8034S-RC • Optimized for DP83840A/Twister Combination • Recommended for use with ICS1890 series, SSI TSC78Q2120 chips • Complies with or exceeds IEEE 802.3, 10/100Base-TX Standards • Guaranteed to operate with 8 mA DC Bias at 70°C • Add “-RC” after part number for RoHS Compliant Electrical Parameters @ 25° C Insertion Loss (dB Max.) OCL (@ 70°C) 100 KHz, 0.1 Vrms 8 mA DC Bias Return Loss (dB Min.) Common Mode Rejection (dB Min.) Crosstalk (dB Min.) 0.1-100 MHz 150 MHz 1-30 MHz 60 MHz 100 MHz 30-100 MHz 200 MHz 300 MHz 500 MHz Cable Side Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv 350 µH -1/-1 -3/-3 -18/-18 -12/-12 -10/-10 -30/-25 -25/-20 -20/-10 -15/--- • Schematic 1.120 (28.45) .480 (12.19) Chip Side 1, 6, 11, 16 .090 (2.29) .050 (1.27) .085 (2.16) 39, 34, 29, 24 Chip Side 3, 8, 13, 18 Transmit Channel Cable Side 38, 33, 28, 23 4, 9, 14, 19 .008/.012 (.203/.305) 0°-8° Cable Side 40, 35, 30, 25 1:1 .030 (.762) .010/.015 (.254/.381) Receive Channel 2, 7, 12, 17 40 21 .670 Solder Pad Layout (17.02) 1 20 .950 (24.13) .260 (6.60) -30 Isolation : 1500 Vrms • Impedance : 100 Ω • Rise Time : 3.0 nS Max. • Package PCA EPF8034S(-RC) Date Code 0.1-100 MHz 36, 31, 26, 21 5, 10, 15, 20 1 CT:1CT 37, 32, 27, 22 .050 (1.27) .016/.022 (.406/.559) .035 (.889) .625 (15.88) Notes : 1. Lead Finish EPF8034S EPF8034S-RC SnPb Hot Tin Dip (Sn) † 2. Peak Temperature Rating 225°C 3. Moisture Sensitive Levels MSL = 3 (168 Hours, ≤30°C/60%RH) (72 Hours, ≤30°C/60%RH) 4.8 grams 5.15 grams 4. Weight 5. Packaging Information 245°C MSL = 4 (Tube) (Tape & Reel) 19 pieces/tube 19 pieces/tube 350 pieces/13” reel 350 pieces/13” reel † Lead Material : Ni Barrier over Cu Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSF8034S & -RC Rev. Orig4 2/5/07 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com