1XN RJ-45 10/100 BASE-T JACK WITH MAGNETIC MODULE Industries N5101 SERIES • RJ-45 1xN, Tab-Down, 8 pin with internal magnetics • Available with and without LEDs • Suitable for CAT 5 and 6 Fast Ethernet cable or better UTP • Minimum 1500VRMS isolation per IEEE 802.3 requirement • Operating temperature range: 0oC to +70oC • RoHS compliant product ELECTRICAL SPECIFICATION @ 25OC Turns Ratio ±2% Retrun Loss (dB) Min MHz Cross Talk (dB) Typ MHz CMR (dB) Typ MHz 60-80 1-100 30-100 -12 -40 -35 -14 -12 -40 -35 -18 -14 -12 -40 -35 -18 -14 -12 -40 -35 RX Insertion Loss 0.1-100MHz (dB) Max 1-30 30-60 1CT:1 -1.1 -18 -14 1CT:1 1CT:1 -1.1 -18 1x6 1CT:1 1CT:1 -1.1 1x8 1CT:1 1CT:1 -1.1 Part Number 1xN TX N5101-2 1x2 1CT:1 N5101-4 1x4 N5101-6 N5101-8 • Inductance: 350μH Min @ 100KHz, 0.1VRMS with 8mA DC • Hipot: 1500VRMS, 1 minute SCHEMATIC DIMENSIONS: N5101-2 Product performance is limited to specified parameters. Data is subject to change without prior notice. 13200 Estrella Ave., Bldg. B Gardena, CA 90248 Tel: 310-325-1043 Fax: 310-325-1044 Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X,X : ±0,38 X,XX : ±0,10 www.mpsind.com [email protected] 1XN RJ-45 10/100 BASE-T JACK WITH MAGNETIC MODULE Industries N5101 SERIES DIMENSIONS: N5101-4 DIMENSIONS: N5101-6 Product performance is limited to specified parameters. Data is subject to change without prior notice. 13200 Estrella Ave., Bldg. B Gardena, CA 90248 Tel: 310-325-1043 Fax: 310-325-1044 Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X,X : ±0,38 X,XX : ±0,10 www.mpsind.com [email protected] 1XN RJ-45 10/100 BASE-T JACK WITH MAGNETIC MODULE Industries N5101 SERIES DIMENSIONS: N5101-8 Product performance is limited to specified parameters. Data is subject to change without prior notice. 13200 Estrella Ave., Bldg. B Gardena, CA 90248 Tel: 310-325-1043 Fax: 310-325-1044 Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X,X : ±0,38 X,XX : ±0,10 www.mpsind.com [email protected]