SHIELDED SMD POWER INDUCTOR Industries PSM63 SERIES • High current inductor for VRM • Low profile (3.0mm height) • High current handling capacity • Inductance range from 0.10 to 10.0 µH • Operating temperature range: -55oC to +125oC • RoHS compliant product ELECTRICAL SPECIFICATION @ 25OC Part Number PSM63- Inductance (µH) ±20% DCR (mΩ) Typ DCR (mΩ) Max IDC (A) Max ISAT (A) Max R10M 0.10 1.5 1.7 32.5 60.0 R15M 0.15 1.9 2.5 30.0 45.0 R20M 0.20 2.4 2.8 24.0 41.0 R22M 0.22 2.5 3.0 23.0 40.0 R33M 0.33 3.5 3.9 20.0 30.0 R36M 0.36 3.6 3.9 20.0 26.0 R47M 0.47 4.0 4.2 17.5 26.0 R56M 0.56 4.7 5.0 16.5 25.5 R68M 0.68 5.0 5.5 15.5 25.0 R82M 0.82 6.7 8.0 13.0 24.0 1R0M 1.0 9.0 10 11.0 22.0 1R5M 1.5 14 15 9.0 18.0 2R2M 2.2 18 20 8.0 14.0 2R5M 2.5 20 22 7.0 14.0 3R3M 3.3 28 30 6.0 13.5 4R7M 4.7 37 40 5.5 10.0 5R6M 5.6 39 42 5.5 6.0 6R8M 6.8 54 60 4.5 8.0 7R5M 7.5 54 60 4.2 7.8 8R2M 8.2 64 68 4.0 7.5 100M 10.0 102 105 3.0 7.0 • Inductance measured at 100kHz / 0.1VRMS • IDC: DC current (A) at which the ΔT of 40°C increase typical • ISAT: DC current (A) for a ΔL drop 30% typical from initial value • Inductance tolerance M=20% Product performance is limited to specified parameters. Data is subject to change without prior notice. 13200 Estrella Ave., Bldg. B Gardena, CA 90248 Tel: 310-325-1043 Fax: 310-325-1044 Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.010 .XXX : ±0.005 mm: X,X : ±0,254 X,XX : ±0,13 www.mpsind.com [email protected] SHIELDED SMD POWER INDUCTOR Industries PSM63 SERIES DIMENSIONS Product performance is limited to specified parameters. Data is subject to change without prior notice. 13200 Estrella Ave., Bldg. B Gardena, CA 90248 Tel: 310-325-1043 Fax: 310-325-1044 Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.010 .XXX : ±0.005 mm: X,X : ±0,254 X,XX : ±0,13 www.mpsind.com [email protected]