1000BASE-T SINGLE PORT RJ-45 JACK WITH MAGNETIC MODULE Industries N5606 • Designed for network interface card application • For Gigabit Transmission over CAT 5 & 6 UTP cable • Designed to meet IEEE802.3 requirement • Operating temperature: 0°C to +70°C • RoHS Compliance Product • Custom design available ELECTRICAL PARAMETERS @25°C Part Turns Number Ratio ±2% N5606 • • 1CT:1 Return Loss (dB) Min MHz Insertion Loss (dB) Max 0.5-40 40-10060 0.1-1MHz 1-65MHz -18 -12+20log(f/80MHz) -1.1 -0.5 CMR CMR to DMR (dB) Min (dB) Typ MHz MHz 65-100MHz 100-125MHz -0.8 -1.2 0.1-100 0.1-100 -30 -35 Inductance: 350µH Min @ 100KHz, 0.1VRMS with 8mA DC Hipot: 1500VRMS DIMENSIONS SCHEMATIC Ω Ω Ω Ω RECOMMENDED PCB LAND PATTERN Product performance is limited to specified parameters. Data is subject to change without prior notice. 13200 Estrella Ave., Bldg. B Gardena, CA 90248 Tel: 310-325-1043 Fax: 310-325-1044 Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X,X : ±0,38 X,XX : ±0,10 www.mpsind.com [email protected]