SM5006 series Crystal Oscillator Module ICs NIPPON PRECISION CIRCUITS INC. OVERVIEW The SM5006 series are crystal oscillator module ICs, that incorporate high-frequency, low current consumption oscillator and output buffer circuits. Highly accurate thin-film feedback resistors and high-frequency capacitors are built-in, eliminating the need for external components to make a stable 3rd-harmonic oscillator. FEATURES ■ ■ ■ ■ ■ ■ Up to 107 MHz operation Capacitors CG, CD built-in Inverter amplifier feedback resistor built-in TTL input level 16 mA (VDD = 4.5 V) drive capability 4 mA (VDD = 4.5 V) drive capability (5006AH×) ■ ■ ■ ■ ■ Output three-state function 2.7 to 5.5 V supply voltage Oscillator frequency output 8-pin SOP (SM5006×××S) Chip form (CF5006×××) SERIES CONFIGURATION 3V operating Version *1 gm ratio SM5006ANAS SM5006ANBS SM5006ANCS SM5006ANDS 0.5 1 2 2 Output load (max) [pF] − − 15 15 Recommended operating frequency rang e [MHz] − − 22 to 30 30 to 50 SM5006ANES 3 15 50 to 70 SM5006ANFS 4 − − SM5006CNCS 2 15 22 to 30 SM5006CNDS SM5006CNES 2 3 15 15 30 to 40 50 to 70 SM5006BNCS 2 15 22 to 70 SM5006BNES 3 15 22 to 70 SM5006DNCS 2 15 22 to 40 SM5006DNES 3 15 22 to 70 SM5006AKAS SM5006AKBS SM5006AKCS SM5006AKDS SM5006CKDS SM5006BKCS SM5006DKCS SM5006AHAS SM5006AHBS SM5006AHCS SM5006AHDS 0.5 1 2 2 2 2 2 0.5 1 2 2 − − − − − − − − − − − − − − − − − − − − − − Built-in capacitance 5V operating Output load (max) [pF] 50 50 50 50 30 (15) *3 30 (15) *3 15 50 15 15 15 50 30 (15) *3 15 50 15 50 15 15 15 15 15 15 15 15 15 15 15 Rf [k Ω] Input level Output duty level 16 16 16 16 8.2 5.6 4.9 2.6 TTL TTL TTL TTL CMOS CMOS CMOS CMOS 8 16 2.6 TTL CMOS 6/6 8 16 2.6 TTL CMOS 8/8 8 16 4.9 TTL CMOS 8/8 7/7 8 8 16 16 2.6 2.6 TTL TTL CMOS CMOS 7/7 8 16 No TTL CMOS 6/6 8 16 No TTL CMOS 8/8 8 16 No TTL CMOS 7/7 8 16 No TTL CMOS 4/4 4/4 4/4 4/4 4/4 4/4 4/4 7/7 7/7 7/7 7/7 8 8 8 8 8 8 8 8 8 8 8 16 16 16 16 16 16 16 16 16 16 16 8.2 5.6 4.9 2.6 2.6 No No 8.2 5.6 4.9 2.6 TTL TTL TTL TTL TTL TTL TTL TTL TTL TTL TTL TTL TTL TTL TTL TTL TTL TTL CMOS CMOS CMOS CMOS Recommended operating frequency rang e [MHz] 22 to 30 30 to 40 40 to 60 50 to 70 Output w a vefo r m *2 tr /tf [ns] CG [pF] CD [pF] 8/8 8/8 7/7 7/7 8 8 8 8 70 to 100 6/6 80 to 107 40 to 60 40 to 50 50 to 70 70 to 100 22 to 100 22 to 70 70 to 107 22 to 70 22 to 50 22 to 100 22 to 70 22 to 30 30 to 40 40 to 60 50 to 70 50 to 70 22 to 70 22 to 70 22 to 30 30 to 40 40 to 60 50 to 70 *1. Chip form devices have designation CF5006 ×××. *2. 5006 ×N ×: C L = 50pF, CMOS load 5006 ×K ×: C L = 15pF, 10TTL load 5 0 0 6 A H ×: C L = 15pF, CMOS load *3. S O P p a ckage only Note: Recommended operating frequency is not the guaranteed value but is measured using NPC’s standard crystal. NIPPON PRECISION CIRCUITS—1 SM5006 series ORDERING INFORMATION D e vice P ackag e S M 5 0 0 6 ×××S 8-pin SOP C F 5 0 0 6 ×××–1 Chip form PACKAGE DIMENSIONS (Unit:mm) • 8-pin SOP 0.15 + 0.1 0.4 0.2 6.2 0.3 4.4 0.2 − 0.05 0.695typ 1.5 0.1 0.05 0.05 5.2 0.3 1.27 0 to 10 0.10 0.4 0.1 0.12 M NIPPON PRECISION CIRCUITS—2 SM5006 series PAD LAYOUT PINOUT (Unit:µm) (Top view) VDD Q (920,1310) HA5006 Y VDD 7 NC 3 6 NC 4 5 Q 1 XT 2 XT VSS 006 (0,0) INH XT XT VSS 8 INH X Chip size: 0.92 × 1.31 mm Chip thickness: 300 ± 30 µm Chip base: V D D level PIN DESCRIPTION and PAD DIMENSIONS P ad dimensions [µm] Number Name I/O Description X Y 1 INH I Output state control input. High impedance when LOW . Pull-up resistor built in 195 212 2 XT I Amplifier input. 385 212 3 XT O Amplifier output. 575 212 4 VSS – Ground 766 212 5 Q O 765 1152 6 NC – Output. Output frequency (f O ) No connection – – 7 NC – No connection – – 8 VDD – Supply voltage 162 1152 Cr ystal oscillator connection pins. Cr ystal oscillator connected between XT and X T BLOCK DIAGRAM VDD VSS XT RG CG XT RD Rf CD Q INH NIPPON PRECISION CIRCUITS—3 SM5006 series SPECIFICATIONS Absolute Maximum Ratings VSS = 0 V P arameter Symbol Condition Rating Unit Supply voltage range VDD −0.5 to 7.0 V Input voltage range V IN −0.5 to V D D + 0.5 V VOUT −0.5 to V D D + 0.5 V Operating temperature range T opr −40 to 85 °C Storage temperature range T stg Output voltage range Output current Pow er dissipation IO U T PD Chip form −65 to 150 8-pin SOP −55 to 125 5006 ×N ×, ×K × 25 5006AH× 10 8-pin SOP 500 °C mA mW NIPPON PRECISION CIRCUITS—4 SM5006 series Recommended Operating Conditions SM5006 series (package form) VSS = 0 V Rating P arameter Symbol Series typ max f ≤ 50MHz, C L = 50pF 4.5 – 5.5 f ≤ 70MHz, C L = 15pF 4.5 – 5.5 f ≤ 40MHz, C L = 15pF 2.7 – 3.6 f ≤ 70MHz, C L = 50pF 4.5 – 5.5 f ≤ 100MHz, C L = 15pF 4.5 – 5.5 f ≤ 50MHz, C L = 15pF 2.7 – 3.6 f ≤ 70MHz, C L = 15pF 3.0 – 3.6 f ≤ 100MHz, C L = 15pF 4.5 – 5.5 f ≤ 107MHz, C L = 15pF 4.5 – 5.5 f ≤ 50MHz, C L = 15pF 2.7 – 3.6 f ≤ 70MHz, C L = 15pF 3.0 – 3.6 A K A , A K B, AKC, C K D, DKC f ≤ 70MHz, C L = 15pF 4.5 – 5.5 V A K D, BKC f ≤ 70MHz, C L = 15pF 4.5 – 5.5 V A H A , A H B, AHC, AHD f ≤ 70MHz, C L = 15pF 4.5 – 5.5 V VSS – VDD V f ≤ 50MHz, C L = 50pF, 4.5 ≤ V D D ≤ 5.5 − 40 – + 85 f ≤ 70MHz, C L = 15pF, 4.5 ≤ V D D ≤ 5.5 0 – + 70 f ≤ 40MHz, C L = 15pF, 2.7 ≤ V D D ≤ 3.6 − 10 – + 70 f ≤ 50MHz, C L = 50pF, 4.5 ≤ V D D ≤ 5.5 − 40 – + 80 f ≤ 70MHz, C L = 50pF, 4.5 ≤ V D D ≤ 5.5 − 20 – + 80 f ≤ 70MHz, C L = 15pF, 4.5 ≤ V D D ≤ 5.5 − 40 – + 85 f ≤ 100MHz, C L = 15pF, 4.5 ≤ V D D ≤ 5.5 0 – + 70 f ≤ 50MHz, C L = 15pF, 2.7 ≤ V D D ≤ 3.6 − 20 – + 80 f ≤ 70MHz, C L = 15pF, 3.0 ≤ V D D ≤ 3.6 − 20 – + 80 f ≤ 70MHz, C L = 50pF, 4.5 ≤ V D D ≤ 5.5 − 20 – + 80 f ≤ 100MHz, C L = 15pF, 4.5 ≤ V D D ≤ 5.5 − 40 – + 85 f ≤ 107MHz, C L = 15pF, 4.5 ≤ V D D ≤ 5.5 − 20 – + 80 f ≤ 50MHz, C L = 15pF, 2.7 ≤ V D D ≤ 3.6 − 20 – + 80 f ≤ 70MHz, C L = 15pF, 3.0 ≤ V D D ≤ 3.6 − 20 – + 80 f ≤ 50MHz, C L = 15pF, 4.5 ≤ V D D ≤ 5.5 − 40 – + 85 f ≤ 70MHz, C L = 15pF, 4.5 ≤ V D D ≤ 5.5 0 – + 70 f ≤ 50MHz, C L = 15pF, 4.5 ≤ V D D ≤ 5.5 − 40 – + 85 f ≤ 70MHz, C L = 15pF, 4.5 ≤ V D D ≤ 5.5 − 20 – + 80 f ≤ 50MHz, C L = 15pF, 4.5 ≤ V D D ≤ 5.5 − 40 – + 85 f ≤ 70MHz, C L = 15pF, 4.5 ≤ V D D ≤ 5.5 − 15 – + 75 A N C , AND, BNC, CNE, DNE VDD A N E , A N F, BNE Input voltage V IN All series A N A , A N B, CNC, C N D, DNC A N C , AND, BNC, CNE, DNE Operating temperature Unit min A N A , A N B, CNC, C N D, DNC Supply voltage Condition TO P R A N E , A N F, BNE A K A , A K B, AKC, C K D, DKC A K D, BKC A H A , A H B, AHC, AHD V V V °C °C °C °C °C °C NIPPON PRECISION CIRCUITS—5 SM5006 series CF5006 series (chip form) VSS = 0 V Rating P arameter Symbol Series typ max f ≤ 50MHz, C L = 50pF 4.5 – 5.5 f ≤ 70MHz, C L = 15pF 4.5 – 5.5 f ≤ 40MHz, C L = 15pF 2.7 – 3.6 f ≤ 70MHz, C L = 50pF 4.5 – 5.5 f ≤ 100MHz, C L = 15pF 4.5 – 5.5 f ≤ 50MHz, C L = 15pF 2.7 – 3.6 f ≤ 70MHz, C L = 15pF 3.0 – 3.6 f ≤ 70MHz, C L = 50pF 4.5 – 5.5 f ≤ 107MHz, C L = 30pF 4.5 – 5.5 f ≤ 50MHz, C L = 15pF 2.7 – 3.6 f ≤ 70MHz, C L = 15pF 3.0 – 3.6 A K A , A K B, AKC, C K D, DKC f ≤ 70MHz, C L = 15pF 4.5 – 5.5 V A K D, BKC f ≤ 70MHz, C L = 15pF 4.5 – 5.5 V A H A , A H B, AHC, AHD f ≤ 70MHz, C L = 15pF 4.5 – 5.5 V VSS – VDD V f ≤ 50MHz, C L = 50pF, 4.5 ≤ V D D ≤ 5.5 − 40 – + 85 f ≤ 70MHz, C L = 15pF, 4.5 ≤ V D D ≤ 5.5 − 15 – + 75 f ≤ 40MHz, C L = 15pF, 2.7 ≤ V D D ≤ 3.6 − 10 – + 70 f ≤ 70MHz, C L = 50pF, 4.5 ≤ V D D ≤ 5.5 − 40 – + 85 f ≤ 100MHz, C L = 15pF, 4.5 ≤ V D D ≤ 5.5 − 20 – + 80 f ≤ 50MHz, C L = 15pF, 2.7 ≤ V D D ≤ 3.6 − 20 – + 80 f ≤ 70MHz, C L = 15pF, 3.0 ≤ V D D ≤ 3.6 − 20 – + 80 f ≤ 70MHz, C L = 50pF, 4.5 ≤ V D D ≤ 5.5 − 40 – + 85 f ≤ 100MHz, C L = 30pF, 4.5 ≤ V D D ≤ 5.5 − 40 – + 85 f ≤ 107MHz, C L = 30pF, 4.5 ≤ V D D ≤ 5.5 − 20 – + 80 f ≤ 50MHz, C L = 15pF, 2.7 ≤ V D D ≤ 3.6 − 20 – + 80 f ≤ 70MHz, C L = 15pF, 3.0 ≤ V D D ≤ 3.6 − 20 – + 80 f ≤ 50MHz, C L = 15pF, 4.5 ≤ V D D ≤ 5.5 − 40 – + 85 f ≤ 70MHz, C L = 15pF, 4.5 ≤ V D D ≤ 5.5 − 15 – + 75 f ≤ 50MHz, C L = 15pF, 4.5 ≤ V D D ≤ 5.5 − 40 – + 85 f ≤ 70MHz, C L = 15pF, 4.5 ≤ V D D ≤ 5.5 − 20 – + 80 f ≤ 50MHz, C L = 15pF, 4.5 ≤ V D D ≤ 5.5 − 40 – + 85 f ≤ 70MHz, C L = 15pF, 4.5 ≤ V D D ≤ 5.5 − 20 – + 80 A N C , AND, BNC, CNE, DNE VDD A N E , A N F, BNE Input voltage V IN All series A N A , A N B, CNC, C N D, DNC A N C , AND, BNC, CNE, DNE Operating temperature TO P R Unit min A N A , A N B, CNC, C N D, DNC Supply voltage Condition A N E , A N F, BNE A K A , A K B, AKC, C K D, DKC A K D, BKC A H A , A H B, AHC, AHD V V V °C °C °C °C °C °C NIPPON PRECISION CIRCUITS—6 SM5006 series Electrical Characteristics 5006×N series 3V operation: VDD = 2.7 to 3.6 V, VSS = 0 V, Ta = −20 to 80 °C unless otherwise noted. Rating P arameter Symbol Condition Unit min typ max HIGH-level output voltage VOH Q: Measurement cct 1, V D D = 2.7 V, IO H = 8 m A 2.2 2.4 – V L O W -level output voltage VOL Q: Measurement cct 2, V D D = 2.7 V, IO L = 8 m A – 0.3 0.4 V VOH = VDD – – 10 VOL = VSS – – 10 Output leakage current IZ Q: Measurement cct 2, I N H = L O W , V D D = 5.5 V µA HIGH-level input voltage V IH INH 2.0 – – V L O W -level input voltage V IL INH – – 0.5 V Current consumption I N H pull-up resistance Feedback resistance Built-in resistance Built-in capacitance ID D RUP Rf I N H = open, Measurement cct 3, load cct 1, V D D = 3.0 to 3.6 V, C L = 15 p F f = 30 M H z SM5006ANCS CF5006ANC SM5006BNCS CF5006BNC – 8 16 f = 30 M H z , Ta = –10 to 70 °C SM5006CNCS CF5006CNC – 8 16 f = 50 M H z SM5006ANDS CF5006AND – 13 26 f = 70 M H z SM5006BNES CF5006BNE SM5006CNES CF5006CNE SM5006DNES CF5006DNE – 15 30 f = 40 M H z , Ta = –10 to 70 °C SM5006CNDS CF5006CND SM5006DNCS CF5006DNC – 11 22 f = 70 M H z SM5006ANES CF5006ANE SM5006ANFS CF5006ANF – 20 40 50 – 150 SM5006ANAS, CF5006ANA 6.97 8.2 9.43 SM5006ANBS, CF5006ANB 4.76 5.6 6.44 SM5006ANCS, CF5006ANC SM5006CNCS, CF5006CNC 4.16 4.9 5.64 SM5006ANDS, CF5006AND SM5006ANES, CF5006ANE S M 5 0 0 6 A N F S , CF5006ANF SM5006CNDS, CF5006CND SM5006CNES, CF5006CNE 2.21 2.6 2.99 Measurement cct 4 Measurement cct 5 RG Design value, determined by the R f value 17 20 23 RD Design value, determined by the R f value 17 20 23 CG Design value, determined by the internal wafer pattern 7.44 8 8.56 CD Design value, determined by the internal wafer pattern 14.88 16 17.12 mA kΩ kΩ Ω pF NIPPON PRECISION CIRCUITS—7 SM5006 series 5V operation: VDD = 4.5 to 5.5 V, VSS = 0 V, Ta = −40 to 85 °C unless otherwise noted. P arameter Symbol HIGH-level output voltage VOH L O W -level output voltage VOL Q: Measurement cct 1, V D D = 4.5 V, IO H = 16 m A Q: Measurement cct 2, V D D = 4.5 V, IO L = 16 m A Output leakage current IZ HIGH-level input voltage V IH INH L O W -level input voltage V IL INH Q: Measurement cct 2, I N H = L O W , V D D = 5.5 V I N H = open, Measurement cct 3, load cct 1, V D D = 4.5 to 5.5 V, C L = 50 p F Current consumption ID D I N H = open, Measurement cct 3, load cct 1, V D D = 4.5 to 5.5 V I N H pull-up resistance Feedback resistance Built-in resistance Built-in capacitance RUP Rf RG Rating Condition VOH = VDD VOL = VSS Measurement cct 5 typ max 4.0 4.2 – V V – 0.3 0.4 – – 10 – – 10 2.0 – – V V – – 0.8 f = 30 M H z SM5006ANAS CF5006ANA – 18 35 f = 40 M H z SM5006ANBS CF5006ANB – 20 40 f = 60 M H z CF5006ANC – 30 60 f = 60 M H z , Ta = –20 to 80 °C SM5006ANCS – 30 50 f = 70 M H z CF5006AND CF5006BNC – 40 80 f = 70 M H z , Ta = –20 to 80 °C SM5006ANDS SM5006BNCS – 40 70 f = 60 MHz, C L = 15 p F, Ta = –15 to 75 °C CF5006CNC – 28 50 f = 60 MHz, C L = 15 p F, Ta = 0 to 70 °C SM5006CNCS – 28 50 f = 70 MHz, C L = 15 p F, Ta = –15 to 75 °C CF5006CND CF5006DNC – 35 65 f = 70 MHz, C L = 15 p F, Ta = 0 to 70 °C SM5006CNDS SM5006DNCS – 35 65 f = 100 MHz, C L = 15 p F, Ta = –20 to 80 °C CF5006CNE CF5006DNE – 45 80 f = 100 MHz, C L = 15 p F, Ta = 0 to 70 °C SM5006CNES SM5006DNES – 45 80 f = 100 MHz, C L = 30 p F CF5006ANE – 50 100 f = 100 MHz, C L = 15 p F SM5006ANES – 45 90 f = 107 MHz, C L = 30 p F, Ta = –20 to 80 °C CF5006ANF CF5006BNE – 60 100 f = 107 MHz, C L = 15 p F, Ta = –20 to 80 °C SM5006ANFS SM5006BNES – 50 90 Measurement cct 4 Unit min 50 – 150 SM5006ANAS, CF5006ANA 6.97 8.2 9.43 SM5006ANBS, CF5006ANB 4.76 5.6 6.44 SM5006ANCS, CF5006ANC SM5006CNCS, CF5006CNC 4.16 4.9 5.64 SM5006ANDS, CF5006AND SM5006ANES, CF5006ANE S M 5 0 0 6 A N F S , CF5006ANF SM5006CNDS, CF5006CND SM5006CNES, CF5006CNE 2.21 2.6 2.99 17 20 23 17 20 23 µA mA kΩ kΩ RD Design value, determined by the R f value Design value, determined by the R f value CG Design value, determined by the internal wafer pattern 7.44 8 8.56 CD Design value, determined by the internal wafer pattern 14.88 16 17.12 Ω pF NIPPON PRECISION CIRCUITS—8 SM5006 series 5006×K series VDD = 4.5 to 5.5 V, VSS = 0 V, Ta = −40 to 85 °C unless otherwise noted. Rating P arameter HIGH-level output voltage L O W -level output voltage Output leakage current Symbol VOH VOL IZ Condition Q: Measurement cct 1, V D D = 4.5 V, IO H = 16 m A Unit min typ max S M 5 0 0 6 A K A S , CF5006AKA S M 5 0 0 6 A K B S , CF5006AKB SM5006AKCS, CF5006AKC SM5006CKDS, CF5006CKD SM5006DKCS, CF5006DKC 3.9 4.2 – SM5006AKDS, CF5006AKD SM5006BKCS, CF5006BKC 4.0 4.2 – – 0.3 0.4 VOH = VDD – – 10 VOL = VSS – – 10 Q: Measurement cct 2, V D D = 4.5 V, IO L = 16 m A Q: Measurement cct 2, I N H = L O W , V D D = 5.5 V V V µA HIGH-level input voltage V IH INH 2.0 – – V L O W -level input voltage V IL INH – – 0.8 V Current consumption I N H pull-up resistance Feedback resistance Built-in resistance Built-in capacitance ID D RUP Rf I N H = open, Measurement cct 3, load cct 1, V D D = 4.5 to 5.5 V, C L = 15 p F f = 30 M H z SM5006AKAS CF5006AKA – 16 32 f = 40 M H z SM5006AKBS CF5006AKB – 18 36 f = 60 M H z , Ta = –15 to 75 °C CF5006AKC CF5006DKC – 25 50 f = 60 M H z , Ta = 0 to 70 °C SM5006AKCS SM5006DKCS – 25 50 f = 70 M H z , Ta = –20 to 80 °C CF5006AKD CF5006BKC – 35 70 f = 70 M H z , Ta = –15 to 75 °C CF5006CKD – 35 70 f = 70 M H z , Ta = 0 to 70 °C SM5006AKDS SM5006BKCS SM5006CKDS – 35 70 50 – 150 S M 5 0 0 6 A K A S , CF5006AKA 6.97 8.2 9.43 S M 5 0 0 6 A K B S , CF5006AKB 4.76 5.6 6.44 SM5006AKCS, CF5006AKC 4.16 4.9 5.64 SM5006AKDS, CF5006AKD SM5006CKDS, CF5006CKD 2.21 2.6 2.99 Measurement cct 4 Measurement cct 5 RG Design value, determined by the R f value 17 20 23 RD Design value, determined by the R f value 17 20 23 CG Design value, determined by the internal wafer pattern 7.44 8 8.56 CD Design value, determined by the internal wafer pattern 14.88 16 17.12 mA kΩ kΩ Ω pF NIPPON PRECISION CIRCUITS—9 SM5006 series 5006AH series VDD = 4.5 to 5.5 V, VSS = 0 V, Ta = −40 to 85 °C unless otherwise noted. Rating P arameter Symbol Condition Unit min typ max HIGH-level output voltage VOH Q: Measurement cct 1, V D D = 4.5 V, IO H = 4 m A 3.9 4.2 – V L O W -level output voltage VOL Q: Measurement cct 2, V D D = 4.5 V, IO L = 4 m A – 0.3 0.5 V VOH = VDD – – 10 VOL = VSS – – 10 Output leakage current IZ Q: Measurement cct 2, I N H = L O W , V D D = 5.5 V µA HIGH-level input voltage V IH INH 2.0 – – V L O W -level input voltage V IL INH – – 0.8 V Current consumption I N H pull-up resistance Feedback resistance Built-in resistance Built-in capacitance ID D RUP Rf I N H = open, Measurement cct 3, load cct 1, V D D = 4.5 to 5.5 V, C L = 15 p F f = 30 M H z SM5006AHAS CF5006AHA – 15 30 f = 40 M H z SM5006AHBS CF5006AHB – 18 36 f = 60 M H z , Ta = –20 to 80 °C CF5006AHC – 25 50 f = 60 M H z , Ta = –15 to 75 °C SM5006AHCS – 25 50 f = 70 M H z , Ta = –20 to 80 °C CF5006AHD – 32 65 f = 70 M H z , Ta = –15 to 75 °C SM5006AHDS – 32 65 50 – 150 SM5006AHAS, CF5006AHA 6.97 8.2 9.43 SM5006AHBS, CF5006AHB 4.76 5.6 6.44 SM5006AHCS, CF5006AHC 4.16 4.9 5.64 SM5006AHDS, CF5006AHD 2.21 2.6 2.99 mA Measurement cct 4 Measurement cct 5 kΩ kΩ RG Design value, determined by the R f value 17 20 23 RD Design value, determined by the R f value 17 20 23 CG Design value, determined by the internal wafer pattern 7.44 8 8.56 CD Design value, determined by the internal wafer pattern 14.88 16 17.12 Ω pF NIPPON PRECISION CIRCUITS—10 SM5006 series Switching Characteristics 5006×N series 3V operation: VDD = 2.7 to 3.6 V, VSS = 0 V, Ta = −20 to 80 °C unless otherwise noted. P arameter Symbol min typ max – 3.5 7.0 Unit Measurement cct 3, load cct 1, 0.1V D D to 0.9V D D , C L = 15 p F, Ta = –10 to 70 °C SM5006ANAS, CF5006ANA SM5006ANBS, CF5006ANB SM5006CNCS, CF5006CNC SM5006CNDS, CF5006CND SM5006DNCS, CF5006DNC tr2 Measurement cct 3, load cct 1, 0.1V D D to 0.9V D D , C L = 15 p F SM5006ANCS, CF5006ANC SM5006ANDS, CF5006AND SM5006ANES, CF5006ANE S M 5 0 0 6 A N F S , CF5006ANF SM5006BNCS, CF5006BNC SM5006BNES, CF5006BNE SM5006CNES, CF5006CNE SM5006DNES, CF5006DNE – 3.5 7.0 tf1 Measurement cct 3, load cct 1, 0.9V D D to 0.1V D D , C L = 15 p F, Ta = –10 to 70 °C SM5006ANAS, CF5006ANA SM5006ANBS, CF5006ANB SM5006CNCS, CF5006CNC SM5006CNDS, CF5006CND SM5006DNCS, CF5006DNC – 3.5 7.0 Measurement cct 3, load cct 1, 0.9V D D to 0.1V D D , C L = 15 p F SM5006ANCS, CF5006ANC SM5006ANDS, CF5006AND SM5006ANES, CF5006ANE S M 5 0 0 6 A N F S , CF5006ANF SM5006BNCS, CF5006BNC SM5006BNES, CF5006BNE SM5006CNES, CF5006CNE SM5006DNES, CF5006DNE – 3.5 7.0 Measurement cct 3, load cct 1, Ta = 25 °C , V D D = 3.3 V, C L = 15 p F, f = 30MHz SM5006ANAS, CF5006ANA SM5006ANBS, CF5006ANB SM5006ANCS, CF5006ANC SM5006CNCS, CF5006CNC 40 – 60 Measurement cct 3, load cct 1, Ta = 25 °C , V D D = 3.3 V, C L = 15 p F, f = 40MHz SM5006CNDS, CF5006CND SM5006DNCS, CF5006DNC 40 – 60 Measurement cct 3, load cct 1, Ta = 25 °C , V D D = 3.3 V, C L = 15 p F, f = 50MHz SM5006ANDS, CF5006AND SM5006BNCS, CF5006BNC 40 – 60 Measurement cct 3, load cct 1, Ta = 25 °C , V D D = 3.3 V, C L = 15 p F, f = 70MHz SM5006ANES, CF5006ANE S M 5 0 0 6 A N F S , CF5006ANF SM5006BNES, CF5006BNE SM5006CNES, CF5006CNE SM5006DNES, CF5006DNE 40 – 60 – – 100 ns – – 100 ns tr1 Output rise time Output fall time tf2 Output duty cycle *1 Rating Condition Duty Output disable delay time tP L Z Output enable delay time tP Z L ns ns % Measurement cct 3, load cct 1, Ta = 25 °C , V D D = 5 V, C L ≤ 15 p F *1. Determined by the lot monitor. NIPPON PRECISION CIRCUITS—11 SM5006 series 5V operation: VDD = 4.5 to 5.5 V, VSS = 0 V, Ta = −40 to 85 °C unless otherwise noted. P arameter Symbol tr1 tr2 Output rise time tr3 tf1 tf2 Output fall time tf3 Rating Condition Measurement cct 3, load cct 1, 0.1V D D to 0.9V D D , C L = 15 p F Measurement cct 3, load cct 1, 0.1V D D to 0.9V D D , C L = 30 p F Measurement cct 3, load cct 1, 0.1V D D to 0.9V D D , C L = 50 p F Measurement cct 3, load cct 1, 0.9V D D to 0.1V D D , C L = 15 p F Measurement cct 3, load cct 1, 0.9V D D to 0.1V D D , C L = 30 p F Measurement cct 3, load cct 1, 0.9V D D to 0.1V D D , C L = 50 p F min typ max SM5006ANAS, CF5006ANA SM5006ANBS, CF5006ANB SM5006CNCS, CF5006CNC SM5006CNDS, CF5006CND SM5006DNCS, CF5006DNC – 2.0 4.0 SM5006ANCS, SM5006ANDS, SM5006BNCS, SM5006CNES, SM5006DNES, – 1.5 3.0 CF5006ANE CF5006ANF CF5006BNE – 2.0 4.0 SM5006ANAS, CF5006ANA SM5006ANBS, CF5006ANB SM5006CNCS, CF5006CNC SM5006CNDS, CF5006CND SM5006DNCS, CF5006DNC – 4.0 8.0 SM5006ANCS, SM5006ANDS, SM5006BNCS, SM5006CNES, SM5006DNES, CF5006ANC CF5006AND CF5006BNC CF5006CNE CF5006DNE – 3.5 7.0 SM5006ANES, CF5006ANE S M 5 0 0 6 A N F S , CF5006ANF SM5006BNES, CF5006BNE – 3.0 6.0 SM5006ANAS, CF5006ANA SM5006ANBS, CF5006ANB SM5006CNCS, CF5006CNC SM5006CNDS, CF5006CND SM5006DNCS, CF5006DNC – 2.0 4.0 SM5006ANCS, SM5006ANDS, SM5006BNCS, SM5006CNES, SM5006DNES, – 1.5 3.0 CF5006ANE CF5006ANF CF5006BNE – 2.0 4.0 SM5006ANAS, CF5006ANA SM5006ANBS, CF5006ANB SM5006CNCS, CF5006CNC SM5006CNDS, CF5006CND SM5006DNCS, CF5006DNC – 4.0 8.0 SM5006ANCS, SM5006ANDS, SM5006BNCS, SM5006CNES, SM5006DNES, CF5006ANC CF5006AND CF5006BNC CF5006CNE CF5006DNE – 3.5 7.0 SM5006ANES, CF5006ANE S M 5 0 0 6 A N F S , CF5006ANF SM5006BNES, CF5006BNE – 3.0 6.0 CF5006ANC CF5006AND CF5006BNC CF5006CNE CF5006DNE Unit ns CF5006ANC CF5006AND CF5006BNC CF5006CNE CF5006DNE ns NIPPON PRECISION CIRCUITS—12 SM5006 series P arameter Output duty cycle *1 Symbol Duty Output disable delay time tP L Z Output enable delay time tP Z L Rating Condition Measurement cct 3, load cct 1, Ta = 25 °C , V D D = 5.0 V min typ max Unit f = 30MHz, C L = 50 p F SM5006ANAS CF5006ANA 45 – 55 f = 40MHz, C L = 50 p F SM5006ANBS CF5006ANB 45 – 55 f = 60MHz, C L = 50 p F SM5006ANCS CF5006ANC 45 – 55 f = 70MHz, C L = 50 p F SM5006ANDS CF5006AND SM5006BNCS CF5006BNC 45 – 55 f = 100MHz, C L = 30 p F CF5006ANE 45 – 55 f = 100MHz, C L = 15 p F SM5006ANES 45 – 55 f = 107MHz, C L = 30 p F CF5006ANF CF5006BNE 45 – 55 f = 107MHz, C L = 15 p F SM5006ANFS SM5006BNES 45 – 55 f = 50MHz, C L = 50 p F SM5006CNCS CF5006CNC SM5006DNCS CF5006DNC 45 – 55 f = 100MHz, C L = 15 p F SM5006CNES CF5006CNE SM5006DNES CF5006DNE 45 – 55 f = 60MHz, C L = 15 p F SM5006CNCS CF5006CNC 40 – 60 f = 70MHz, C L = 15 p F SM5006CNDS CF5006CND SM5006DNCS CF5006DNC 40 – 60 – – 100 ns – – 100 ns Measurement cct 3, load cct 1, Ta = 25 °C , V D D = 5 V, C L ≤ 15 p F % *1. Determined by the lot monitor. NIPPON PRECISION CIRCUITS—13 SM5006 series 5006×K series VSS = 0 V, Ta = −40 to 85 °C unless otherwise noted. P arameter Symbol Rating Condition min typ max Unit Output rise time tr Measurement cct 3, load cct 1, 0.4V to 2.4V, V D D = 4.5 to 5.5 V C L = 15 p F – 2 4 C L = 50 p F – – 7 Output fall time tf Measurement cct 3, load cct 1, 2.4V to 0.4V, V D D = 4.5 to 5.5 V C L = 15 p F – 2 4 C L = 50 p F – – 7 f = 30MHz SM5006AKAS CF5006AKA 45 – 55 f = 40MHz SM5006AKBS CF5006AKB 45 – 55 f = 60MHz SM5006AKCS CF5006AKC 40 – 60 f = 70MHz SM5006AKDS CF5006AKD SM5006BKCS CF5006BKC 45 – 55 f = 50MHz SM5006DKCS CF5006DKC 45 – 55 f = 70MHz SM5006CKDS CF5006CKD SM5006DKCS CF5006DKC 40 – 60 – – 100 ns – – 100 ns Output duty cycle *1 Duty Output disable delay time tP L Z Output enable delay time tP Z L Measurement cct 3, load cct 1, Ta = 25 °C , V D D = 5.0 V, C L = 15 p F Measurement cct 3, load cct 1, Ta = 25 °C , V D D = 5 V, C L ≤ 15 p F ns ns % *1. Determined by the lot monitor. 5006AH series VDD = 4.5 to 5.5 V, VSS = 0 V, Ta = −40 to 85 °C unless otherwise noted. P arameter Symbol tr1 Output rise time tr2 tf1 Output fall time Output duty cycle *1 tf2 Duty Output disable delay time tP L Z Output enable delay time tP Z L Rating Condition min typ max Unit Measurement cct 3, load cct 1, 0.1V D D to 0.9V D D C L = 15 p F – 5.0 7.0 C L = 50 p F – 13 21 Measurement cct 3, load cct 1, 0.9V D D to 0.1V D D C L = 15 p F – 5.0 7.0 C L = 50 p F – 13 21 f = 30MHz SM5006AHAS CF5006AHA 45 – 55 f = 40MHz SM5006AHBS CF5006AHB 45 – 55 f = 50MHz SM5006AHCS CF5006AHC 45 – 55 f = 60MHz, Ta = –20 to 80 °C CF5006AHC 40 – 60 f = 60MHz, Ta = –15 to 75 °C SM5006AHCS 40 – 60 f = 70MHz, Ta = –20 to 80 °C CF5006AHD 40 – 60 f = 70MHz, Ta = –15 to 75 °C SM5006AHDS 40 – 60 – – 100 ns – – 100 ns Measurement cct 3, load cct 1, Ta = 25 °C , V D D = 5.0 V, C L = 15 p F Measurement cct 3, load cct 1, Ta = 25 °C , V D D = 5 V, C L ≤ 15 p F ns ns % *1. Determined by the lot monitor. NIPPON PRECISION CIRCUITS—14 SM5006 series Current consumption and Output waveform with NPC’s standard crystal Cb L Ca R f (MHz) R (Ω) L (mH) Ca (fF) Cb (pF) 30 18.62 16.24 1.733 5.337 40 20.53 11.34 1.396 3.989 50 22.17 7.40 1.370 4.105 70 25.42 4.18 1.254 5.170 100 16.60 3.56 0.726 5.394 107 35.83 2.98 0.732 2.265 FUNCTIONAL DESCRIPTION Standby Function When INH goes LOW, the oscillator output on Q goes high impedance. INH Q Oscillator HIGH (or open) fO output frequency Nor mal operation LOW High impedance Nor mal operation NIPPON PRECISION CIRCUITS—15 SM5006 series MEASUREMENT CIRCUITS Measurement cct 1 Measurement cct 4 5.0V VDD C1 Signal Generator XT VDD Q R2 Rfo R1 XT RUP = VDD IPR VSS INH VSS VOH Q out monitor VIH A 0V IPR 3.5V P −P , 10MHz sine wave input signal (5V operation) 2.0V P −P , 10MHz sine wave input signal (3V operation) C1 : 0.001µF R1 : 50Ω R2 : 250Ω (5006×N ×/5V operation) 275Ω (5006×N ×/3V operation) 245Ω (5006AKA, AKB, AKC, CKD, DKC) 250Ω (5006AKD, BKC) 975Ω (5006AH×) R fo : 2.7kΩ (5006B××, D××) Measurement cct 2 Measurement cct 5 IOL, IZ VDD IZ VDD XT INH A Q XT Rf = XT VSS V VOL VDD IRf VSS A IRf Measurement cct 3 IDD IST A XT Rfo VDD X'tal Q XT INH VSS R fo : 2.7kΩ (5006B××, D××) NIPPON PRECISION CIRCUITS—16 SM5006 series Load cct 1 Load cct 2 Q output 400Ω CL Q output (Including probe capacitance) CL (Including probe capacitance) Switching Time Measurement Waveform Output duty level (CMOS) 0.9VDD Q output 0.9VDD 0.1VDD 0.1VDD DUTY measurement voltage (0.5V DD ) TW tr tf Output duty level (TTL) 2.4V DD Q output 2.4V DD 0.4V DD 0.4V DD DUTY measurement voltage (1.4V DD ) TW tr tf Output duty cycle (CMOS) DUTY measurement voltage (0.5V DD) Q output TW T DUTY= TW/ T 100 (%) Output duty cycle (TTL) DUTY measurement voltage (1.4V DD) Q output TW T DUTY= TW/ T 100 (%) NIPPON PRECISION CIRCUITS—17 SM5006 series Output Enable/Disable Delay INH VIH VIL tPZL tPLZ Q output INH input waveform tr = tf 10ns NIPPON PRECISION CIRCUITS INC. reserves the right to make changes to the products described in this data sheet in order to improve the design or performance and to supply the best possible products. Nippon Precision Circuits Inc. assumes no responsibility for the use of any circuits shown in this data sheet, conveys no license under any patent or other rights, and makes no claim that the circuits are free from patent infringement. Applications for any devices shown in this data sheet are for illustration only and Nippon Precision Circuits Inc. makes no claim or warranty that such applications will be suitable for the use specified without further testing or modification. The products described in this data sheet are not intended to use for the apparatus which influence human lives due to the failure or malfunction of the products. Customers are requested to comply with applicable laws and regulations in effect now and hereinafter, including compliance with expor t controls on the distribution or dissemination of the products. Customers shall not expor t, directly or indirectly, any products without first obtaining required licenses and approvals from appropriate government agencies. NIPPON PRECISION CIRCUITS INC. NIPPON PRECISION CIRCUITS INC. 4-3, Fukuzumi 2-chome Koto-ku, Tokyo 135-8430, Japan Telephone: +81-3-3642-6661 Facsimile: +81-3-3642-6698 http://www.npc.co.jp/ Email: sales @ npc.co.jp NC9713EE 2000.10 NIPPON PRECISION CIRCUITS—18