DATA SHEET O K I C O M M U N I C A T I O N S P R O D U C T S MBF9411B/9412B Surface Acoustic Wave (SAW) Filters for Mobile and Portable Phones September 1998 ■ MBF93xx■ –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Oki Semiconductor MBF9411B/9412B Surface Acoustic Wave (SAW) Filters DESCRIPTION The new MBF9411B/9412B Surface Acoustic Wave (SAW) filters use Oki’s third generation design and manufacturing technology to achieve a high out-of-band attenuation, low insertion loss, and low manufacturing cost in an industry standard 6-pin package, 1.2-mm thick and 3.0-mm square. These 50-Ω matched bandpass microwave RF filters are designed for the worldwide standard wireless voice and data communications frequencies being used by cellular and wireless local-loop service providers. They have achieved design acceptance by leading wireless handset manufacturers in North America, Europe, and Asia. Oki’s lowest insertion loss SAW filters and high performance GaAs devices are used to reduce transmitter complexity. Receiver designs can be simplified by using the higher Tx frequency attenuation SAW filters. These devices take advantage of Oki’s 16-year plus RF communications component manufacturing experience and very high volume manufacturing capability to meet customer demands. FEATURES • 6-pin SMD package • High reliability • Low insertion loss • Small size, light weight • 50-Ω matched SAW Filter Summary [1] Part Number Description Pass Frequency (MHz) Insertion Loss (dB) Stop Frequency (MHz) Attenuation (dB) MBF9411B CDMA Transmit Filter 824 to 849 <3.5 869 to 1049 >30 MBF9412B CDMA Receive Filter 869 to 894 <3.5 779 to 849 >30 1. All parts in 6-pin ceramic square package (3.0 mm x 3.0 mm) by 1.2-mm thick with system matched 50-Ω I/O Oki Semiconductor 1 ■ MBF9411B/9412B ■ –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– PIN CONFIGURATION 3.0 5 0.6 1.2 TYP 4 1 2 3 Pin Number 1.2 TYP 6 1.0 3.0 1, 3, 4, 6 1 2 3 6 0.3 5 1.2 2 Input 5 Output Dimensions in mm. 4 1.2 BLOCK DIAGRAM VCO Ant DUPLEXER Rx-BPF IF-BPF DEMO Rx-BPF RF Amp Tx-BPF Power Amp SAW Mixer SAW RF Amp IF Amp Mixer Tx-BPF MOD VCO 2 Oki Semiconductor Signal Ground ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– ■ MBF9411B/9412B ■ ELECTRICAL CHARACTERISTICS MBF9411B Electrical Characteristics (-40 to +85°C) Frequency (MHz) Parameter Min. Max. Units Center Frequency (FC) Fr 836.5 – – MHz Bandwidth (BW) Fr ±12.5 – – MHz Insertion Loss across BW 824 to 849 Return Loss across BW Stop Band Attenuation 3.5 dB – dB 0.3 to 850 28 – dB 869 to 1049 30 – dB 1049 to 2000 20 – dB – 50 ohms Terminating Impedance CH1 CH2 – 8.5 S11 log MAG S21 log MAG CDMA TX 5 dB/ 10 dB/ REF 0 db REF 0 db 1. –11.571 dB 1. –2.6971 dB 824.000 000 MHz 1 Cor 1 2 3 4 2. –19.721 dB 849 MHz 3. –1.7294 dB 869 MHz 1 4. –1.1989 dB 894 MHz Hld 2 2 4 2. –2.0891 dB 849 MHz 3 Cor 3. –49.21 dB 869 MHz 4. –42.015 dB 894 MHz Hld CENTER 860.000 000 MHZ SPAN 200.000 000 MHZ Figure 1. MBF9411B Frequency Response Oki Semiconductor 3 ■ MBF9411B/9412B ■ –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– MBF9412B Electrical Characteristics (-30 to +85°C) Parameter Frequency (MHz) Min. Max. Units Ft 881.5 – – MHz Center Frequency (FC) Bandwidth (BW) Fr ±12.5 – – MHz 869 to 894 – 3.5 dB Ripple across BW – 2.0 dB VSWR across BW – 2.0 dB 500 to 779 25 – dB 779 to 849 30 – dB Insertion Loss across BW Stop Band Attenuation 914 to 939 20 – dB 939 to 1049 35 – dB 1049 to 2000 25 – dB – 50 ohms Terminating Impedance CH1 CH2 S11 log MAG S21 log MAG CDMA R–INT 5 dB/ 10 dB/ REF 0 db REF 0 db 1. –.9518 dB 1. –40.088 dB 824.000 000 MHz 1 Cor 1 2 3 4 2. –1.8131 dB 894 MHz 3. –13.744 dB 869 MHz 4. –31.116 dB 894 MHz Hld 1 PASS 2 3 2 2. –41.148 dB 849 MHz Cor 4 3. –2.8434 dB 869 MHz 4. –2.3963 dB 894 MHz PASS Hld START 760.000 000 MHz STOP 960.000 000 MHz Figure 2. MBF9412B Frequency Response 4 Oki Semiconductor The information contained herein can change without notice owing to product and/or technical improvements. Please make sure before using the product that the information you are referring to is up-to-date. The outline of action and examples of application circuits described herein have been chosen as an explanation of the standard action and performance of the product. When you actually plan to use the product, please ensure that the outside conditions are reflected in the actual circuit and assembly designs. Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or unusual physical or electrical stress including, but not limited to, exposure to parameters outside the specified maximum ratings or operation outside the specified operating range. Neither indemnity against nor license of a third party's industrial and intellectual property right,etc.is granted by us in connection with the use of product and/or the information and drawings contained herein. No responsibility is assumed by us for any infringement of a third party's right which may result from the use thereof. When designing your product, please use our product below the specified maximum ratings and within the specified operating ranges, including but not limited to operating voltage, power dissipation, and operating temperature. The products listed in this document are intended for use in general electronics equipment for commercial applications (e.g.,office automation, communication equipment, measurement equipment, consumer electronics, etc.).These products are not authorized for use in any system or application that requires special or enhanced quality and reliability characteristics nor in any system or application where the failure of such system or application may result in the loss or damage of property or death or injury to humans. Such applications include, but are not limited to: traffic control, automotive, safety, aerospace, nuclear power control, and medical, including life support and maintenance. Certain parts in this document may need governmental approval before they can be exported to certain countries. The purchaser assumes the responsibility of determining the legality of export of these parts and will take appropriate and necessary steps, at their own expense, for export to another country. Copyright 1997 Oki Semiconductor Oki Semiconductor reserves the right to make changes in specifications at anytime and without notice. This information furnished by Oki Semiconductor in this publication is believed to be accurate and reliable. However, no responsibility is assumed by OKI Semiconductor for its use; nor for any infringements of patents or other rights of third parties resulting from its use. No license is granted under any patents or patent rights of OKI. Oki Semiconductor Oki REGIONAL SALES OFFICES Northwest Area Northeast Area 785 N. Mary Avenue Sunnyvale, CA 94086 Tel: 408/720-8940 Fax: 408/720-8965 138 River Road Shattuck Office Center Andover, MA 01810 Tel: 508/688-8687 Fax: 508/688-8896 Southwest Area 2302 Martin Street Suite 250 Irvine, CA 92715 Tel: 714/752-1843 Fax: 714/752-2423 Southeast Area 1590 Adamson Parkway Suite 220 Morrow, GA 30260 Tel: 404/960-9660 Fax: 404/960-9682 Oki Web Site: http://www.okisemi.com Oki FAX Service: Call toll free 1-800-OKI-6994 Oki Stock No: 320075-001 Corporate Headquarters 785 N. Mary Avenue Sunnyvale, CA 94086-2909 Tel: 408/720-1900 Fax: 408/720-1918