10Base-T Interface Module ELECTRONICS INC. EPE6166CSE & EPE6166CSE-RC • Robust construction allows for toughest reflow processing • Complies with or exceeds IEEE 802.3, 10Base-T Standards • Manufactured in compliance with UL1950/UL1459 • Add “-RC” after part number for RoHS Compliant • Operating Temperature : -40°C to +85°C • Storage Temperature : -55°C to +125°C • 1500 Vrms Isolation Electrical Parameters @ 25° C OCL (µH Min.) Insertion Loss (dB Max.) Return Loss (dB Min.) @ 100 KHz, 20 mVrms Cable Side 1-10 MHz 5-10 MHz @ 40 MHz 10-30 MHz 30-100 MHz 1-10 MHz Xmit Xmit Xmit Xmit Xmit Xmit Xmit/Rcv Xmit/Rcv Between Channels -1 -15 -5 -14 -24 -30 -40 -30 -30 160 Attenuation (dB Min.) Common Mode Rejection (dB Min.) @ 20 MHz @ 25 MHz @ 30 MHz Crosstalk (dB Min.) • Cut-off Frequency : 17 MHz ± 1, Ref. @ 5 MHz • Cable Side Impedance : 100 Ω • Package Schematic .540 (13.72) PCA EPE6166CSE(-RC) Date Code .270 (6.86) .420 (10.67) Transmit .055 (1.40) .150 (3.81) .095 (2.41) 1: 2 11 6 Chip Side Suggested Solder Pad Layout LPF 7 Cable Side 8 9 10 .030 (.762) .350 (8.89) .050 (1.27) Receive 1:1 .010/.015 (.254/.381) .240 (6.10) 1 .008/.012 (.203/.305) 0°-8° 16 Chip 2 Side Cable 15 Side 3 .050 (1.27) .016/.022 (.406/.559) 14 .035 (.889) .150 (3.81) .370 (9.40) EPE6166CSE EPE6166CSE-RC 1. Lead Finish Notes : SnPb Hot Tin Dip (Sn) † 2. Peak Temperature Rating 225°C 3. Moisture Sensitive Levels MSL = 3 (168 Hours, ≤30°C/60%RH) 4. Weight 5. Packaging Information (Tube) (Tape & Reel) 245°C MSL = 4 (72 Hours, ≤30°C/60%RH) 1.13 grams 1.13 grams 34 pieces/tube 34 pieces/tube 500 pieces/13” reel 500 pieces/13” reel † Lead Material : Ni Barrier over Cu Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSE6166CSE & -RC Rev. A6 10/16/07 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com