10/100Base-TX Interface Module with Enhanced Common Mode Attenuation ELECTRONICS INC. EPF8196F2 & EPF8196F2-RC • Guaranteed to operate with 8 mA DC Bias at 70°C • Complies with or exceeds IEEE 802.3, 10/100Base-TX Standards • Add “-RC” after part number for RoHS Compliant • Storage Temperature : -40°C to +125°C • Operating Temperature : 0°C to +70°C Electrical Parameters @ 25° C Insertion Loss (dB Max.) OCL @ 70°C 100 KHz, 0.1 Vrms 8 mA DC Bias Return Loss (dB Min.) Common Mode Rejection (dB Min.) Crosstalk (dB Min.) 1-80 MHz 150 MHz 1-30 MHz 60 MHz 80 MHz 1-30 MHz 30-100 MHz 100-500 MHz Cable Side Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv 350 µH -1/-1 -3/-3 -18/-18 -12/-12 -10/-10 -40/-40 -30/-30 -10/-10 1-100 MHz -35 Isolation : 1500 Vrms • Impedance : 100 Ω • Rise Time : 3.0 nS Max. • • Package Schematic Transmit Channel .580 (14.73) 12 TX+ TD+ 1 .092 (2.34) .079 (2.01) .092 (2.34) 11 TX- TD- 2 PCA EPF8196F2(-RC) Date Code 1CT:1CT Pad .610 (15.49) Layout .460 (11.68) TDCT 3 10 TXCT Pin 1 I.D. Receive Channel .395 (10.03) RDCT .040 (1.02) .010/.015 (.254/.381) .250 (6.35) 4 9 RXCT RD+ 5 8 RX+ .008/.013 (.203/.330) 0°-8° RD- 6 .016/.022 (.406/.559) 1CT:1CT 7 RX- .035 (.889) .079 (2.01) .580 (14.73) Notes : EPF8196F2 EPF8196F2-RC SnPb Hot Tin Dip (Sn) † 1. Lead Finish 2. Peak Temperature Rating 225°C 3. Moisture Sensitive Levels MSL = 3 (168 Hours, ≤30°C/60%RH) 4. Weight 5. Packaging Information (Tube) (Tape & Reel) 245°C MSL = 4 (72 Hours, ≤30°C/60%RH) 2.24 grams 2.24 grams 36 pieces/tube 36 pieces/tube TBD pieces/13” reel TBD pieces/13” reel † Lead Material : Ni Barrier over Cu Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSF8196F2 & -RC Rev. 3 8/13/07 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com