10/100Base-TX Interface Module with Enhanced Common Mode Attenuation ELECTRONICS INC. EPF8187SE & EPF8187SE-RC • Designed to operate from -40°C to +85°C @ 8 mA DC Bias • Complies with or exceeds IEEE 802.3, 10/100Base-TX Standards • Add “-RC” after part number for RoHS Compliant • Storage Temperature : -40°C to +125°C Electrical Parameters @ 25° C OCL @ 70°C Insertion Loss (dB Max.) 100 KHz, 0.1 Vrms 8 mA DC Bias 0.1-100 MHz Return Loss (dB Min.) 150 MHz 1-30 MHz 60 MHz Common Mode Rejection (dB Min.) 80 MHz 1-30 MHz 30-100 MHz Crosstalk (dB Min.) 100-500 MHz Cable Side Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv 350µH -1 -1 -3 -3 -18 -18 -12 -12 -10 -10 -40 -40 -35 -30 -10 -10 • Package Schematic .490 (12.45) .092 (2.34) .050 (1.27) PCA .270 EPF8187SE(-RC) (6.86) Date Code .460 (11.68) Transmit Channel Solder Pad Layout 1 16 2 15 14 3 1CT: Pin 1 I.D. .190 (4.83) 2CT Receive Channel .030 (.762) .350 (8.89) .010/.015 (.254/.381) -35 Impedance : 100 Ω • Rise Time : 3.0 nS Max. • Isolation : 1500 Vrms • .070 (1.78) 1-100 MHz .008/.013 (.203/.330) 0°-8° 6 11 7 10 9 8 1CT:1CT .035 (.889) .017/.022 (.432/.559) .050 (1.27) .365 (9.27) Notes : 1. Lead Finish EPF8187SE EPF8187SE-RC SnPb Hot Dipped Sn or SAC 2. Peak Temperature Rating 225°C 3. Moisture Sensitive Levels MSL = 3 (168 Hours, ≤30°C/60%RH) (72 Hours, ≤30°C/60%RH) 1 gram 1 gram 4. Weight 5. Packaging Information 245°C MSL = 4 (Tube) (Tape & Reel) 40 pieces/tube 40 pieces/tube 650 pieces/13” reel 650 pieces/13” reel Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSF8187SE & -RC Rev. - 6/18/08 JGD TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com