PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com SMD QUARTZ CRYSTAL SERIES SMD0507 (2 pad housing 7.0x5.0mm) FEATURES + + + + + + Large frequency sepctrum available Do not use for new designs—please use SMD0507/4 for new design Low profile – 1.3 mm package height Extended temperature range to –40/+125°C available Qualified for automotive applications Excellent clock signal generator for CPU´s PB FREE / ROHS-2 2011/65/EU COMPLIANT GENERAL DATA PARAMETERS PRODUCT FEATURES AND CONDITIONS SMD-CRYSTAL SERIES SMD0507/2 NUMBER OF SOLDER PADS 2 (Please do not use this housing for new design. Please use SMD0507/4) FREQUENCY RANGE 6.0 ~ 40.0 MHz AT-Fundamental FREQUENCY TOLERANCES AT 25°C ±20 ppm ~ ±50 ppm LOAD CAPACITANCE (CL) Series, 10 pF ~ 30 pF WORKING TEMPERATURE RANGES 0/+50°C ~ -40/+85°C RESONANCE RESISTANCE 80 Ω max. SHUNT CAPACITANCE (Co) 7 pF max. DRIVE LEVEL 0.01mW ~ 0.1mW standard (optional 0.5mW max. available) AGING ±5 ppm per year standard INSULATION RESISTANCE >500 MΩ DC/100V ±10% STORAGE TEMPERATURE -55°/+125°C DELIVERY FORM Tape and Reel (1.000 pcs per reel) OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION FREQUENCY STABILITY VS. TEMPERATURE ±15ppm ±20ppm ±30ppm ±50ppm 0°/+50°C + + + + -10°/+60°C + + + + 0°/+70°C + + + + -20°/+70°C + + + + + + + -40°/+85°C CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 1 OF 4 I SPEC 01 I REV.00 I MAY 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com DIMENSIONS REFLOW SOLDER PROFILE RESONANCE RESISTANCE FREQUENCY IN MHz VIBRATION MODE ESR MAX. IN Ω 8.0 ~ 16.0 MHz AT Fund. 80 16.0 ~ 25.0 MHz AT Fund. 50 25.0 ~ 30.0 MHz AT Fund. 40 30.0 ~ 50.0 MHz AT Fund. 35 50.0 ~ 54.0 MHz AT Fund. 80 40.0 ~ 80.0 MHz 3rd OT AT 80-100 CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 2 OF 4 I SPEC 01 I REV.00 I MAY 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com ORDERING INFORMATION SERIES SMD0507/2 FREQUENCY 6.0 ~ 40.0 MHz AT-Fundamental FREQUENCY TOLERANCE AT 25°C TEMPERATURE RANGE 0°/+50°C -10°/+60°C 0°/+70°C -20°/+70°C -40°/+85°C ±20 PPM ~ ±50 PPM SMD0507/2 27.000 MHz 10/15/-40+85/10pF TEMPERATURE STABILITY LOAD CAPACITANCE 10 pF ~ 30 pF or Series See Table „FREQUENCY STABILITY VS. TEMPERATURE“ EXAMPLE: SMD0507/2 27.000 MHz 10/15/-40+85/10pF PLEASE INDICATE YOUR REQUIRED PARAMETERS CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 3 OF 4 I SPEC 01 I REV.00 I MAY 2015 PETERMANN-TECHNIK GmbH Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech Tel: +49/8191/305395 ∙ Fax: +49/8191/305397 [email protected] ∙ www.petermann-technik.com PREMIUM QUALITY BY PETERMANN-TECHNIK OUR COMPANY IS CERTIFIED ACCORDING TO ISO 9001:2008 IN OCTOBER 2013 BY THE DMSZ CERTIFIKATION GMBH. THIS IS FOR YOU TO ENSURE THAT THE PRINCIPLES OF QUALITY MANAGEMENT ARE FULLY IMPLEMENTED IN OUR QUALITY MANAGEMENT SYSTEM AND QUALITY CONTROL METHODS ALSO DOMINATE OUR QUALITY STANDARDS. © PETERMANN-TECHNIK GmbH 2015. The information contained herein is subject to change at any time without notice. PETERMANN-TECHNIK owns all rights, title and interest to the intellectual property related to PETERMANN-TECHNIK's products, including any software, firmware, copyright, patent, or trademark. The sale of PETERMANN-TECHNIK products does not convey or imply any license under patent or other rights. PETERMANNTECHNIK retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to the sale of products or services by PETERMANN-TECHNIK. Unless otherwise agreed to in writing by PETERMANN-TECHNIK, any reproduction, modification, translation, compilation, or representation of this material shall be strictly prohibited. CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS PAGE 4 OF 4 I SPEC 01 I REV.00 I MAY 2015