WWW.PHIHONG.COM 4 Watt Flip-Plug Compact Adapter PSM04A Wall Plug Adapter Meets CEC and EISA Requirements Features • • • No Load Power Consumption < 0.5 Watt Flip Plug Design EISA Compliant* • • Low Leakage Current Low Cost • • Portable Equipment PDA • • Height: 25mm (0.98in) Weight: 145g (5.12oz) Applications • • Wireless Communications Peripherals Safety Approvals • cUL/UL Mechanical Characteristics • • Length: 69.4mm (2.73in) Width: 48mm (1.89in) Output Specifications Model DC Output Voltage PSM04A-050(STD) 5V Load Min. Max. 0A 0.75A Ripple (1) P-P (max) Regulation Line Load 55mV ±5% Efficiency Level Note: (1) Measured with by-pass capacitors 0.1uf/10uf at output connector terminal and oscilloscope set at 20Mhz. *EISA Compliant Level IV115VAC Phihong is not responsible for any errors or changes. Content is subject to change without notice. Please consult the factory and visit www.phihong.com for the most up-to-date specifications. PSM04A Characteristics INPUT: WWW.PHIHONG.COM AC Input Voltage Rating Short Circuit Protection 100 to 240VAC Protection against short circuit for output: the load current delivered into a short circuit shall not exceed 2A. AC Input Voltage Range 90 to 264VAC ENVIRONMENTAL: Temperature AC Input Current 0.2A(RMS) Max. Operation Non-operation Leakage Current Humidity 250uA Max. Operation AC Input Frequency Emissions 47-63Hz FCC Part 15 Class B CISPR 22 Class B 0 to +45°C -40 to +85°C 10 to 90% Input Power Saving 0.5W Max. Dielectric Withstand (Hi-pot) Test Primary to Secondary: 3000VAC OUTPUT: Efficiency DC Output Connector 50% Min. 2.1x5.5mm Center Positive Standard Hold-up Time Mating Connector 10mS Min. @ 120VAC and Max. load Kycon KLD-0202-A or equivalent Over Voltage Protection 7.5V Max. Dimension Diagram Unit: mm (inch)