PHIHONG PSAC60W-240

WWW.PHIHONG.COM
60 Watt Universal 2-Wire Input Adapter
PSAC60W Power Adapter Meets Level V Efficiency Requirements
Features
 Low Cost
 Efficiency Level V Compliance
 Class B EMI
 Ecodesign ErP Directive 2009/125/EC
Compliant
Applications
 Portable Equipment
 Peripherals
Safety Approvals
 cUL/UL
Mechanical Characteristics
 Length: 130mm (5.12in)
 Width: 60mm (2.36in)
Output Specifications
Model
PSAC60W-120
PSAC60W-240
PSAC60W-480
PSAC60W-560
DC Output
Voltage
+12V
+24V
+48V
+56V




Non-vented/Spill-proof Case
No Load Power consumption <0.5W
Low Profile Design
EISA Compliant


Networking
Gaming Machines

CE


Height: 32mm (1.30in)
Weight: 305g (10.76oz)
Load
Min.
0A
0A
0A
0A
Max.
5.0A
2.5A
1.25A
1.08A
Ripple (1)
P-P (max.)
200mV
350mV
480mV
560mV
Regulation
Line & Load
±5%
±5%
±5%
±5%
Efficiency
Level
(1) Measured with a 10uF capacitor and a 0.1uF capacitor at output connector terminal and oscilloscope set at 20MHz.
Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the
most up-to-date specifications and contact information.
Revised 12/12/2011
PSAC60W Characteristics
Input:
AC Input Voltage Rating
100 to 240V AC
AC Input Frequency
WWW.PHIHONG.COM
Environmental:
Temperature
Operation
Non-operation
Humidity
0 to +40°C
-20 to +70°C
5 to 90%
47 to 63Hz
Emissions
Input Current
1.6A at 100V AC
0.7A at 240V AC
FCC Class B
EN55022 Class B
Immunity
0.25mA maximum at 254V AC and 60Hz
IEC61000-4-2
IEC61000-4-5
Inrush Current
Over-Voltage Protection
Leakage Current
90A maximum at 100V AC
150A maximum at 240V AC
Level 4
Level 3
Circuit will latch then auto-restart.
Over-Current Protection
Input Power Saving
<0.5W at no load
Output:
Output Power
60W
Efficiency
Meets requirements for Level V marking
Dimension Diagram Unit: mm (inch)
[Type text]
Circuit will latch then auto-restart
Short-Circuit Protection
Output can be shorted permanently without damage
Isolation
Primary to Secondary: 500V DC >7M OHM
Dielectric Withstand (Hi-pot) Test
Primary to Secondary: 3000V AC for 1 min., 10mA
DC Output Connector
2.1 x 5.5 x 9.5mm Center Positive Barrel