WWW.PHIHONG.COM 60 Watt Universal 3-Wire Input Adapter PSAC60M Power Adapter Meets Level V Efficiency Requirements Features Low Cost Efficiency Level V Compliance Class B EMI Ecodesign ErP Directive 2009/125/EC Compliant Applications Portable Equipment Peripherals Safety Approvals CE Mechanical Characteristics Length: 130mm (5.12in) Width: 60mm (2.36in) Output Specifications Model PSAC60M-120 PSAC60M-240 PSAC60M-480 PSAC60M-560 DC Output Voltage +12V +24V +48V +56V Non-vented/Spill Proof Case No Load Power Consumption < 0.5W Low Profile Design EISA Compliant Networking Gaming Machines cUL/UL Height: 32mm (1.30in) Weight: 305g (10.76oz) Load Min. 0A 0A 0A 0A Max. 5.0A 2.5A 1.25A 1.08A Ripple (1) P-P (max.) 200mV 350mV 480mV 560mV Regulation Line & Load ±5% ±5% ±5% ±5% Efficiency Level (1) Measured with a 10uF capacitor and a 0.1uF capacitor at output connector terminal and oscilloscope set at 20MHz. Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 12/12/2011 PSAC60M Characteristics Input: AC Input Voltage Rating 100 to 240V AC AC Input Frequency WWW.PHIHONG.COM Environmental: Temperature Operation Non-operation Humidity 0 to +40°C -20 to +70°C 5 to 90% 47 to 63Hz Emissions Input Current 1.5A at 120V AC 0.7A at 240V AC FCC Part 15 Class B EN55022 Class B Immunity Inrush Current 90A maximum at 100V AC 150A maximum at 240V AC (Cold Start at ambient 25°C) IEC61000-4-2 IEC61000-4-5 Level 4 Level 3 Over-Voltage Protection Circuit will latch the auto-restart. Leakage Current 3.5mA maximum at 254V AC and 60Hz Over-Current Protection Circuit will latch Input Power Saving < 0.5W at no load Short-Circuit Protection If output shorts then circuit will auto-restart Output: Output Power Isolation 60W maximum Primary to Secondary: 500V DC >7M OHM Efficiency Dielectric Withstand (Hi-pot) Test Meets requirements for Level V marking Primary to Secondary: 3000V AC for 1 min., 10mA Dimension Diagram Unit: mm [Type text] DC Output Connector 2.1 x 5.5 x 9.5mm Center Positive Barrel