DC-AC INVERTER UNIT PS-DA0129-183 (S) (5 W SINGLE OUTPUT) (PRELIMINARY INFORMATION) DESCRIPTION : This DC to AC Inverter was developed for notebook computer and many other low LCD Backlight power supply as low profile applications, either for Note Book PC or Industrial. Optimized for Kyocera: TCG057QV1AC-G50 and KCG047QV1AA-A21 APPLICABLE LCD: 10 to 12 inches single lamp type Lamp Voltage 685 Vrms Lamp Current 5.0 mArms Lamp Start Up Voltage 1.600 Vrms (Vin : 5 Vdc) FEATURES : Current Feedback Circuit High Efficiency Low noise with voltage resonant circuit Regulated output current RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity DIMENSIONS : LxBxH -10°C ~ +55°C -20°C ~ +85°C 95 %RH max 95.5 x 20.0 x 9.5 Pin 1 Pin 1 Unit : mm Weight :20(g) typ. Note: Please use plastic screw in case of a non-insulating mounting base! Components No. 1 2 Part Description PCB Connector CN1 Qty. 1 1 Material UL94V-0 (FR-4 or CEM-3) 53261-0590 Note t=1m m Molex or equal 3 Connector CN2 1 SM02(8.0)B-BHSS-1-TB JST or equal Input side CN1: Pin No. CN 1-1 CN 1-2 CN 1-3 CN 1-4 CN 1-5 Output side CN2 Symbols Ratings Vin 4.5 ~ 5.5 Vdc GND Vrm t 0 ~ 0.5 = OFF / 2.5 ~ Vin = ON Vbr 0 ~ 3 Vdc N.C. Pin No. CN 2-1 CN 2-2 Symbols Vhigh N.C. Ratings 685Vrm s (5.0 m Arm s ) - CN 2-3 Vlow (GND) - Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (1) Version 1.0, 29th August 2007 DC-AC INVERTER UNIT PS-DA0129-183 (S) (5 W SINGLE OUTPUT) (PRELIMINARY INFORMATION) ELECTRICAL CHARACTERISTICS : Conditions Symbols Specification Vin (V) Vbr (V) Iout Iout Iin F Vopen 5±0.25 5±0.25 5±0.25 5±0.25 5±0.25 0.0 3.0 0.0 0.0 0.0 -10 -10 -10 -10 -10 Ts d 5±0.25 0.0 -10 ~ +55 Note 1 : Tu (°C) ~ ~ ~ ~ ~ +55 +55 +55 +55 +55 Unit Note 5.5 3.0 1.0 55 1.800 m Arm s m Arm s Adc kHz Vrm s Dut y = 10 0 % - s ec Min. Typ. Max. 4.5 2.0 35 1.500 5.0 2.5 0.8 45 1.600 - 1.0 Dut y = 50 % min. wit ho ut lo ad Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked on mechanical drawing and any conductors. TEST CIRCUIT : SW 1 Operation of unit a Operation b Non operation Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (2) Version 1.0, 29th August 2007