QUARTZCOM OCO

OCO-M25AH
Through hole OCXO
HCMOS




Features
Applications: CDMA, 3G, base station, networking, instrumentation
High frequency stability vs. temperature
Wide operating temperature range: -40 up to +85 °C
Low aging
Specification
Parameter
OCO-M25AH3
Frequency range
Standard frequencies
Frequency stability
vs. operating temperature range
vs. supply voltage change
vs. load change
vs. aging after 30 days of operation
Short term stability
Output waveform
Output load
Supply voltage (*)
Steady-state current consumption @ +25 °C
Warm-up time
Frequency pulling range
Vcontrol (Vc) via external voltage
Vcontrol (Vc) via external potentiometer
Reference voltage output (Vref)
Phase noise @ 13 MHz carrier frequency
Operating temperature range
Storage temperature range
(*) 12 V as supply voltage on request
OCO-M25AH5
10.0000 ~ 30.0000 MHz
10.00, 12.80, 13.00, 16.384, 20.00, 25.00 & 30.00 MHz
 ±2 x 10-8
over -40 ~ +85 °C
-8
 ±1 x 10
over -40 ~ +70 °C
 ±5 x 10-9
over -10 ~ +60 °C
 ±5 x 10-9
±5 %
-9
 ±5 x 10
±5 %
-8
1st year
 ±3 x 10
-11
< 1 x 10
Allan deviation per 1 s
HCMOS
VOH > 0.9 Vdc VOL < 0.1 Vdc
10 k // 15 pF
±10 %
+3.3 V 5 %
+5.0 V 5 %
< 450 mA
< 200 mA
< 2 min
< 1 x 10-7 @ +25 °C
> ±5 x 10-7
positive slope
0 ~ +3.0 V
0 ~ +4.5 V
20 kΩ
+3.0 V
+4.5 V
< -115 dBc/Hz @
10 Hz
< -140 dBc/Hz @
100 Hz
< -145 dBc/Hz @
1 kHz
< -150 dBc/Hz @
10 kHz
-10 ~ +60 °C, -20 ~ +70 °C, -40 ~ +70 °C or -40 ~ +85 °C
-55 ~ +85 °C
Environmental test
vibration
acceleration: 10 g; 10 Hz up to 500 Hz and down to 10 Hz; all 3 axes, 4.5 h/axis
shock
100 g, half-sine, 3 ms
(3 shocks each, 6 directions)
Pin function
#1
#2
#3
#4
#5
RF output
GND
Vc
Vref
Vdc
Circuit diagram
CBP = 0.01 mF
Zout = 10 k // 15 pF
2002/95/EC RoHS compliant
QuartzCom AG
[email protected]
www.quartzcom.com
QuartzCom Asia
[email protected]
QuartzCom USA
[email protected]
12 May. 10