RECTRON SEMICONDUCTOR RB501V-40 TECHNICAL SPECIFICATION SCHOTTKY DIODES FEATURES * High current rectifier Schottky diode * Low voltage,low inductance * For power supply SOD-323 MECHANICAL DATA Case: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.004 grams .071(1.80) .063(1.60) .006(.15) .014(.35) .010(.25) .055(1.40) .047(1.20) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .106(2.70) .098(2.50) .003(.08) * * * * * MAX.039(1.00) Ratings at 25 OC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. REF .019(0.46) .004(.10) .000(.00) For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@T A =25 OC unless otherwise noted) SYMBOL RATINGS Maximum Peak reverse voltage Maximum DC reverse voltage Maximum Peak Forward Surge Current Mean rectifying current Operating and Storage Temperature Range UNITS RB501V-40 VRM 45 VR 40 Volts Volts IFSM 1 Amps IO 0.1 Amps TJ,TSTG -55 to + 125 O C o ELECTRICAL CHARACTERISTICS ( @ TA = 25 C unless otherwise noted ) CHARACTERISTICS Reverse voltage leakage current Forward voltage (VR=10V) (IF=100mA) SYMBOL MIN. TYP. MAX. UNITS IR - - 30 µA - - 0.55 - - 0.34 - 6 - VF (IF=10mA) Diode Capacitance (VR=10V,f=1MHz) CT V pF 2006-3 RATING AND CHARACTERISTICS CURVES ( RB501V-40 ) 10m 1000 IR.REVERSE CURRENT(A) -25 O C 1m 75OC 100µ 10µ 25OC 1µ 0.1 0 0.2 0.1 0.3 0.5 0.4 0 0.6 30 20 10 40 VF.FORWARD VOLTAGE (V) VR.REVERSE VOLTAGE(V) Figure1 Forward characteristics Figure2 Reverse characteristics 100 100 IO.CURRENT(%) CT.CAPACITANCE BERWEEN TERNINALS(pF) 1 12 5 10 25 O C O C 100 75 O C IF.FORWARD CURRENT (mA) 125OC 10 80 60 40 20 1 0 5 10 15 20 25 30 35 VR.REVERSE VOLTAGE (V) Figure3 Capacitance between terminals characteristics 0 0 25 50 75 100 125 TA.AMBIENT TEMPERATURE(OC) Figure4 Derating curve(mounting on glass epoxy PCBs) RECTRON DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures. RECTRON