RECTRON SD107WS SEMICONDUCTOR TECHNICAL SPECIFICATION SMALL SIGNAL DIODE VOLTAGE RANGE 30 Volts FEATURES * Fast Switching Speed * Low turn-on voltage SOD-323 MECHANICAL DATA Case: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.004 grams .071(1.80) .063(1.60) .006(.15) .014(.35) .010(.25) .055(1.40) .047(1.20) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .106(2.70) .098(2.50) .003(.08) * * * * * MAX.039(1.00) Ratings at 25 OC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. REF .019(0.46) .004(.10) .000(.00) For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@T A =25 OC unless otherwise noted) SYMBOL SD107WS UNITS Reverse Breakdown Voltage @ I R=100 µA V(BR)R 30 Volts Maximum Working Peak reverse Voltage VRM 30 Volts Maximum Forward Comtinuous Current IFM 100 mAmps Non-Repetitive Peak Forward Surge Current @t p =10mS IFSM 750 mAmps Maximum Power Dissipation (T C = 25 OC) PD 250 RATINGS Thermal Resistance Junction to ambient air Operating and Storage Temperature Range TθJA 500 TJ,TSTG -65 to + 150 mW O C/W O C o ELECTRICAL CHARACTERISTICS ( @ TA = 25 C unless otherwise noted ) CHARACTERISTICS Reverse voltage leakage current (VR=25V) SYMBOL MIN. TYP. MAX. UNITS IR - - 1 µA 300 - VF - (IF=2mA) Forward voltage Pulse Tesx tp<300µs,δ<2% (IF=15mA) (IF=50mA) (IF=100mA) Diode capacitance (VR=10V,f=1MHz) CT - 360 - 470 550 580 800 - 7 mV pF 2006-3 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures. RECTRON