RECTRON SD103BW

RECTRON
SD103BW
SEMICONDUCTOR
TECHNICAL SPECIFICATION
SMALL SIGNAL DIODE
VOLTAGE RANGE 30 Volts
FEATURES
*
*
*
*
Low Forward Voltage Drop
Guard Ring Construction for Transient Protection
Negligible Reverse Recovery Time
Low Reverse Capacitance
SOD-123
MECHANICAL DATA
Case: Molded plastic
Epoxy: UL 94V-O rate flame retardant
Lead: MIL-STD-202E method 208C guaranteed
Mounting position: Any
Weight: 0.01 gram
.110(2.80)
.102(2.60)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
.006(.15)
.026(.65)
.018(.45)
.067(1.70)
.059(1.50)
.152(3.85)
.140(3.55)
.003(.08)
*
*
*
*
*
.049(1.25)
.041(1.05)
Ratings at 25 o C ambient temperature unless otherwise specified.
REF .020(0.50)
Single phase, half wave, 60 Hz, resistive or inductive load.
.004(.10)
.000(.00)
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted)
RATINGS
Reverse Breakdown Voltage @I R =10µA
Maximum Repetitive Peak Reverse Voltage
Maximum Working Peak reverse Voltage
Maximum DC Blocking Voltage
Maximum RMS Voltage
SYMBOL
SD103BW
UNITS
V(BR)R
30
Volts
V RRM
V RWM
VR
30
Volts
VR(RMS)
21
Volts
Maximum Forward Comtinuous Current
IFM
350
mAmps
Repetitive Peak Forward Current @t<1.0S
IFRM
1.5
Amps
Typical Reverse Recovery Time(I F=I R=200mA,I rr =0.1X IR,R L=100Ω)
T rr
10
nS
Typical Junction Capacitance(V R=0V,f=1.0MHz)
CT
50
pF
Maximum Power Dissipation
PD
400
mW
O
Typical Thermal Resistance
RθJA
300
Operating and Storage Temperature Range
TSTG
-65 to + 125
O
SYMBOL
SD103BW
UNITS
C/W
C
ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted)
CHARACTERISTICS
Maximum Instantaneous Forward Voltage
Maximum Instantaneous Reverse Current
@I F =20mA
@I F =200mA
@V R =20V
VF
IR
0.37
0.60
5.0
Volts
µAmps
2006-5
RATING AND CHARACTERISTICS CURVES ( SD103BW )
100
100
CJ, CAPACITANCE (pF)
IF, FORWARD CURRENT(mA)
1000
10
1.0
10
1
0.10
0.01
0.1
0
0.5
1.0
0
200
400
600
800
VF, FORWARD VOLTAGE (V)
VR, REVERSE VOLTAGE(V)
Figure1 Typical Forward Characteristics
Figure2 Typical Junction Capactitance vs Reverse Voltage
RECTRON
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.
RECTRON