RECTRON SD106WS SEMICONDUCTOR TECHNICAL SPECIFICATION SMALL SIGNAL DIODE VOLTAGE RANGE 30 Volts FEATURES * Fast Switching Speed * Low turn-on voltage SOD-323 MECHANICAL DATA Case: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.004 grams .071(1.80) .063(1.60) .006(.15) .014(.35) .010(.25) .055(1.40) .047(1.20) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .106(2.70) .098(2.50) .003(.08) * * * * * MAX.039(1.00) Ratings at 25 OC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. REF .019(0.46) .004(.10) .000(.00) For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@T A =25 OC unless otherwise noted) SYMBOL SD106WS UNITS Reverse Breakdown Voltage @ I R=100 µA V(BR)R 30 Volts Maximum Working Peak reverse Voltage VRM 30 Volts Maximum Forward Comtinuous Current IFM 200 mAmps Non-Repetitive Peak Forward Surge Current @t p =10mS IFSM 1 Amps Maximum Power Dissipation (T C = 25 OC) PD 250 RATINGS Thermal Resistance junction to ambient air TθJA 500 Operating and Storage Temperature Range TJ,TSTG -65 to + 150 mW O C/W O C o ELECTRICAL CHARACTERISTICS ( @ TA = 25 C unless otherwise noted ) CHARACTERISTICS Reverse voltage leakage current (VR=25V) SYMBOL MIN. TYP. MAX. UNITS IR - - 5 µA 260 - VF - 320 - 420 - 490 550 - 10 (IF=2mA) Forward voltage Pulse Tesx tp<300µs,δ<2% (IF=15mA) (IF=100mA) (IF=200mA) Diode capacitance (VR=10V,f=1MHz) CT - mV pF 2006-3 RATING AND CHARACTERISTICS CURVES ( SD106WS ) 1000 10000 100 TJ=125OC 1000 O TJ=125 C TJ=100OC 10 100 O IR IN µA IF IN mA TJ=-40 C TJ=25OC TJ=75OC 1 10 TJ=50OC 0.1 1 TJ=25OC 0.01 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0 5 10 15 20 25 30 VR,VARIOUS TEMPERATURES(V) VF,VARIOUS TEMPERATURES(V) Figure1 Forward Voltage Forward Current Figure2 Typical Variation of Reverse Current 45 40 35 30 C IN pF 0 25 20 15 10 5 0 0 4 8 12 16 20 24 28 VR,REVERSE APPLIED VOLTAGE(V) Figure3 Typical Capacitance OC RECTRON DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures. RECTRON