MP 450W/650W/1000W Modular Power series Features : ZVT technology to reduce power dissipation and improve efficiency Various output configuration is selectable Built in active PFC, PF>0.95 Universal AC input/ full range Remote Control on every individual output module Remote Sense on every individual output module(MS-75,150,300) Built in parallel function(MS-300) Protections:Short circuit/Over load/Over voltage for all output modules Additional 12V/0.1A auxiliary output for remote control Cooling by built-in DC fan with fan alarm function 3 years warranty Output Configuration Guide MP - - Example: MP1K0- A 2 E # S 2 Single output(MS-300) 2 SLOT (300W max.) Single output(MS-150) 1 SLOT (150W max.) SLOT1 SLOT2 SLOT3 SLOT4 SLOT5 SLOT6 SLOT7 450/650/1K0(450W/650W/1000W) Modular Power with PFC 450W/650W(5SLOT) Parallel or option code (See Table 1.) 1000W(7SLOT) Voltage code A B C D E F G H I J K K SLOT1 O/P:2V@25A SLOT2,3 O/P:12V@25A SLOT4 Blank Slot Voltage 2V 3.3V 5V 7.5V 12V 15V 18V 24V 27V 33V 48V Voltage code 2A 2B 2C 2D 2E 2F 2G 2H 2I 2J 2K Voltage 2V 3.3V 5V 7.5V 12V 15V 18V 24V 27V 33V 48V Single output(MS-75) 1 SLOT (75W max.) Voltage code L M N O P Q Voltage 3.3V 5V 12V 15V 24V 48V Dual output(MD-100) 1 SLOT (100W max.) Voltage code R S T U V W SLOT5 O/P:5V@10A [email protected] X Voltage 5V 5V 5V 12V 5V 15V 24V 5V 24V 12V 12V 12V 15V 15V SLOT6,7 O/P:[email protected] SPECIFICATION MODEL PFC-450 VOLTAGE RANGE 85 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz PF>0.95/230VAC POWER FACTOR INPUT EFFICIENCY PROTECTION FUNCTION 3.2A/230VAC 9A/115VAC INRUSH CURRENT 25A/115VAC <1mA/240VAC 40A/230VAC 30A/115VAC OVER TEMPERATURE OTHERS 50A/230VAC 650W max. 450W max. Thermal switch detect on the heatsink of power MOSFET 13.5A/115VAC 20A/115VAC 6.7A/230VAC 40A/230VAC 1000W max. Protection type : Shut down o/p voltage, recovers automatically after temperature goes down Output shutdown when FAN is malfunction REMOTE CONTROL RC+/RC-: 0 ~ 0.8V or Short, Power ON AUXILIARY POWER(AUX) [email protected](only for Remote ON/OFF Control) -20 ~ +70 (Refer to output load derating curve) VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE (Note 5) 85% typ. 4.5A/230VAC FAN ALARM WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT EMC 85% typ. 6.3A/115VAC WORKING TEMP. SAFETY & PF>0.98/115VAC at full load AC CURRENT TOTAL OUTPUT POWER PFC-1000 120 ~370VDC Note.1 83% typ. LEAKAGE CURRENT OUTPUT PFC-650 RC+/RC-: 4 ~ 12V or Open, Power OFF 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY DIMENSION Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61000-6-1, EN61204-3 Light industry level, criteria A 254*127*63.5mm (L*W*H) 278*127*63.5mm (L*W*H) 278*177.8*63.5mm (L*W*H) PACKING 1.8Kg(typ.); 6pcs / 11.8Kg / 1.25CUFT 2.16Kg(typ.); 6pcs / 14Kg / 1.34CUFT 3Kg(typ.); 6pcs /19Kg / 1.74CUFT File Name:MP-450,650,1K0-SPEC 2004-12-20 MP 450W/650W/1000W Modular Power series SPECIFICATION 1 SLOT Single output (150W) MS-150 MS-150F MS-150G MS-150H MS-150I MS-150J MS-150K DC VOLTAGE RATED CURRENT 2V 3.3V 5V 7.5V 12V 15V 18V 24V 27V 33V 48V 25A 25A 25A 18A 13A 10A 8.5A 6.5A 5.8A 4.7A 3.2A PEAK LOAD 0 ~ 25A Note.4 30A 0 ~ 25A 0 ~ 25A 0 ~ 18A 0 ~ 13A 0 ~ 10A 0 ~ 8.5A 0 ~ 6.5A 0 ~ 5.8A 0 ~ 4.7A 0 ~ 3.2A 30A 30A 20.7A 15A 11.5A 9.8A 7.5A 6.7A 5.4A 3.68A 135W 156W 150W 153W 156W 156.6W 155.1W 153.6W RATED POWER 50W 82.5W 125W RIPPLE & NOISE (max.) Note.2 50mVp-p 80mVp-p 80mVp-p VOLTAGE ADJ. RANGE 1.6 ~ 2.6V 2.6 ~ 4V 4 ~ 6V VOLTAGE TOLERANCE Note.3 3.0% 2.0% 2.0% LINE REGULATION 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 2.0% SETUP, RISE, HOLD TIME 1500ms, 50ms, 20ms at full load 100mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 250mVp-p 250mVp-p 9 ~ 13.2V 13.2 ~ 16.8V 16.8 ~ 20V 20 ~ 26.4V 25 ~ 31V 1.0% 1.0% 1.0% 1.0% 1.0% 0.2% 0.2% 0.3% 0.3% 0.3% 0.5% 0.5% 0.5% 0.5% 0.5% 6 ~ 9V 2.0% 0.5% 1.0% 30 ~ 40V 1.0% 0.2% 0.5% 40 ~ 53V 1.0% 0.2% 0.5% 121 ~ 150% rated output power 116 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed OVER LOAD PROTECTION 2.7 ~ 4V OVER VOLTAGE FUNCTION MS-150C MS-150D MS-150E MS-150A CURRENT RANGE OUTPUT (MS-150) MS-150B OUTPUT VOLTAGE CODE REMOTE INHIBIT CONTROL 4.1 ~ 5V 6.1 ~ 7.5V 9.1 ~ 11.2V 13.3 ~ 18V 16.9 ~ 22V 20.1 ~ 26V 26.5 ~ 35V 31.1 ~ 39V 40.1 ~ 48V 53.1 ~ 60V Protection type : Shut down o/p voltage, re-power on to recover RC+/RC-: 0 ~ 0.8V or OPEN, POWER ON RC+/RC-: 4 ~ 12V POWER OFF 2 SLOT Single output (300W) MS-300 OUTPUT VOLTAGE CODE MS-300-2A MS-300-2B MS-300-2C MS-300-2D MS-300-2E MS-300-2F MS-300-2G MS-300-2H MS-300-2I MS-300-2J MS-300-2K DC VOLTAGE 2V 33V 7.5V 12V 15V 18V 24V 27V 12.5A 11.2A 50A 50A 50A 40A 25A 20A 16.7A CURRENT RANGE 0 ~ 50A 0 ~ 50A 0 ~ 50A 0 ~ 40A 0 ~ 25A 0 ~ 20A 0 ~ 16.7A 0 ~ 12.5A 0 ~ 11.2A 48V 9.1A 6.3A 0 ~ 9.1A 0 ~ 6.3A Note.4 57.5A 57.5A 57.5A 46A 29A 23A 19.2A 14.4A 12.9A 10.5A 7.2A 100W 165W 250W 300W 300W 300W 300.6W 300W 302.4W 300.3W 302.4W RATED POWER RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 1.6 ~ 2.6V 2.6 ~ 4V VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE, HOLD TIME OVER LOAD PROTECTION OVER VOLTAGE FUNCTION 5V RATED CURRENT PEAK LOAD OUTPUT (MS-300) 3.3V REMOTE INHIBIT CONTROL 3.0% 0.5% 2.0% 80mVp-p 100mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p 300mVp-p 4 ~ 6V 6 ~ 9V 2.0% 0.5% 1.0% 2.0% 0.5% 1.0% 2.0% 0.5% 1.0% 9 ~ 13.2V 13.2 ~ 16.8V 16.8 ~ 20V 20 ~ 26.4V 25 ~ 31V 1.0% 1.0% 1.0% 1.0% 1.0% 0.2% 0.2% 0.3% 0.3% 0.3% 1.0% 1.0% 0.5% 0.5% 0.5% 30 ~ 40V 1.0% 0.2% 1.0% 40 ~ 53V 1.0% 0.2% 1.0% 1500ms, 50ms, 20ms at full load 116 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 3 ~ 4V 4.1 ~ 5V 6.1 ~ 7.5V 9.1 ~ 11.2V 13.3 ~ 18V 16.9 ~ 22V 20.1 ~ 26V 26.5 ~ 35V 31.1 ~ 39V 40.1 ~ 48V 53.1 ~ 60V Protection type : Shut down o/p voltage, re-power on to recover RC+/RC-: 0 ~ 0.8V or OPEN, POWER ON RC+/RC-: 4 ~ 12V POWER OFF 1 SLOT Single output (75W) MS-75 OUTPUT VOLTAGE CODE MS-75L DC VOLTAGE RATED CURRENT 3.3V 5V 12V 15A 15A 6.3A CURRENT RANGE 0 ~ 15A 0 ~ 15A 0 ~ 6.3A 0 ~ 5A 0 ~ 3.2A 0 ~ 1.6A 17.3A 7.3A 5.8A 3.7A 1.8A 75W 75.6W 75W 76.8W 76.8W 80mVp-p 150mVp-p 150mVp-p 150mVp-p 250mVp-p 4 ~ 6V 9 ~ 13.2V 13.2 ~ 16.8V 20 ~ 26.4V 40 ~ 53V PEAK LOAD OUTPUT (MS-75) Note.4 17.3A RATED POWER 49.5W RIPPLE & NOISE (max.) Note.2 80mVp-p VOLTAGE ADJ. RANGE 2.6 ~ 4V MS-75N MS-75O MS-75P MS-75Q 15V 24V 48V 5A 3.2A 1.6A VOLTAGE TOLERANCE Note.3 2.0% 2.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.3% 0.3% 0.2% 0.2% LOAD REGULATION 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% SETUP, RISE, HOLD TIME 1500ms, 50ms, 20ms at full load OVER LOAD 116 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed PROTECTION OVER VOLTAGE FUNCTION MS-75M REMOTE INHIBIT CONTROL 4.1 ~ 5V 6.1 ~ 7.5V 13.3 ~ 18V 16.9 ~ 22V 26.5 ~ 35V 53.1 ~ 60V Protection type : Shut down o/p voltage, re-power on to recover RC+/RC-: 0 ~ 0.8V or OPEN, POWER ON RC+/RC-: 4 ~ 12V POWER OFF File Name:MP-450,650,1K0-SPEC 2004-12-20 MP 450W/650W/1000W Modular Power series SPECIFICATION 1 SLOT Isolated Dual output (100W) MD-100 OUTPUT VOLTAGE CODE MD-100R MD-100S MD-100T MD-100X 5V 5V 5V 12V 5V 15V 24V 5V MD-100V 24V 12V MD-100W DC VOLTAGE RATED CURRENT 12V 12V 15V 10A 8A 10A 4.2A 10A 3.4A 2.5A 8A 2.5A 5A 3.4A 4A 2 ~ 10A 0 ~ 5.8A 2 ~ 10A 0 ~ 4.7A 0.5 ~ 3A 0 ~ 10A 0.6 ~ 3A 0 ~ 4.7A 100.8W 101W 100W 150mVp-p 100mVp-p 150mVp-p 200mVp-p 100mVp-p 240mVp-p 120mVp-p 11.4 ~ 13.2V 4.75 ~ 5.5V 14.2 ~ 16.5V 22.8 ~ 26.4V 4.75 ~ 5.5V 22.8 ~ 26.4V 11.4 ~ 13.2V 2.0% 3.0% 3.0% 3.0% 3.0% 3.0% 3.0% 0.5% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% CURRENT RANGE RATED POWER OUTPUT (MD-100) 2 ~ 10A 0 ~ 8A Note.6 90W RIPPLE & NOISE (max.) Note.2 100mVp-p 100mVp-p 100mVp-p VOLTAGE ADJ. RANGE 4.75 ~ 5.5V 4.75 ~ 5.5V 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 3.0% 3.0% 3.0% LINE REGULATION LOAD REGULATION SETUP, RISE, HOLD TIME 1.0% 1.0% 1.0% 2.0% 2.0% 2.0% 2.0% 1500ms, 50ms, 20ms at full load 2.0% 2.0% 2.0% 2.0% 1.0% 3.4A 2.0% 15V 2.7A 1 ~ 5A 0 ~ 5.8A 1 ~ 4.7A 0 ~ 4.7A 100.8W 100.5W 120mVp-p 120mVp-p 150mVp-p 150mVp-p 11.4~ 13.2V 11.4~ 13.2V 14.2 ~ 16.5V 14.2 ~ 16.5V 2.0% 3.0% 2.0% 3.0% 0.5% 1.0% 0.5% 1.0% 1.0% 2.0% 1.0% 2.0% 105 ~ 150% rated output power Protection type : Shut down o/p voltage, re-power on to recover OVER LOAD PROTECTION OVER VOLTAGE FUNCTION 100.4W MD-100U REMOTE INHIBIT CONTROL 5.6 ~ 7.2V 5.6 ~ 7.2V 5.6 ~ 7.2V 13.3 ~ 17V 5.6 ~ 7.2V 16.6 ~ 22V 26.5 ~ 34V 5.6 ~ 7.2V 26.5 ~ 34V 13.3 ~ 17V 13.3 ~ 17V 13.3 ~ 17V 16.6 ~ 22V 16.6 ~ 22V Protection type : Shut down o/p voltage, re-power on to recover RC+/RC-: 0 ~ 0.8V or OPEN, POWER ON RC+/RC-: 4 ~ 12V POWER OFF 1. MP450:The value changed by installing different output modules. The efficiency in specification means output modules are composed by following modules. 5V(Voltage code C)*1, 12V(Voltage code E)*1, 24V(Voltage code H)*1, 5V(Voltage code M)*1. MP650:The value changed by installing different output modules. The efficiency in specification means output modules are composed by following modules. 5V(Voltage code C)*2, 12V(Voltage code E)*1, 24V(Voltage code H)*2. MP1K0:The value changed by installing different output modules. The efficiency in specification means output modules are composed by following modules. 5V(Voltage code C)*2, 12V(Voltage code E)*2, 24V(Voltage code H)*3. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. 35% Duty cycle maximum within every 10 seconds. Average output power should not exceed the rated power. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 6. If the output voltage adjust to higher level, the rated current should be derated to meet the total rated power for both outputs(For MD-100 only). NOTE Table 1. Parellel code(For MS-300 only) SLOT6 SLOT7 X ----- ----- 1 ----- ----- 2 ----- ----- Code SLOT1 SLOT2 SLOT3 SLOT4 SLOT5 3 4 5 6 Code X,1,2 for MP450,MP650 Code X,1,2,3,4,5,6 for MP1K0 File Name:MP-450,650,1K0-SPEC 2004-12-20 MP 450W/650W/1000W Modular Power Mechanical Specification Case No. series Unit:mm MP450 254 19 147.5 19 38 63.5 12.5 147.5 4-M4 1 2 3 12.25 254 CN4 4-M4 3 2 101.5 127 Air flow direction 1 TB1 10 8.2 MP650 278 19 171.5 19 38 63.5 12.5 171.5 12.25 4-M4 CN4 1 2 3 Air flow direction 3 2 101.5 127 4-M4 1 TB1 10 8.2 File Name:MP-450,650,1K0-SPEC 2004-12-20 MP 450W/650W/1000W Modular Power series Mechanical Specification MP1K0 278 19 171.5 19 38 63.5 12.5 171.5 15.65 4-M4 CN4 1 2 3 152.4 177.8 4-M4 Air flow direction 3 2 1 TB1 10 8.2 TB1(PFC-450/650/1K0) Pin No. 1 2 3 Assignment AC/L AC/N FG CN4(PFC-450/650/1K0) : JST B3B-XH or equivalent Assignment Pin No. 1 +RC: +Remote ON/OFF 2 -RC: -Remote ON/OFF 3 VCC: 12V/0.1A auxiliary output Mating Housing Terminal JST XHP or equivalent JST SXH-001T-P0.6 or equivalent Mechanism of Output Modules MS-75 21mm max. 138mm 60mm CN51 4 1 Output Connector( CN51) : JST B4B-XH or equivalent Pin No. 1 2 3 4 -V +V Assignment +S: +Remote sensing -S: -Remote sensing +RC: +Remote ON/OFF -RC: -Remote ON/OFF Mating Housing Terminal JST XHP or equivalent JST SXH-001T-P0.6 or equivalent SVR1 MS-150 21mm max. 138mm 60mm CN20 4 1 Output Connector( CN20) : JST B4B-XH or equivalent -V +V SVR2 Pin No. 1 2 3 4 Assignment +S: +Remote sensing -S: -Remote sensing +RC: +Remote ON/OFF -RC: -Remote ON/OFF Mating Housing Terminal JST XHP or equivalent JST SXH-001T-P0.6 or equivalent File Name:MP-450,650,1K0-SPEC 2004-12-20 MP 450W/650W/1000W Modular Power series Mechanism of Output Modules MS-300 138mm 42mm max. -V 60mm -V +V 1 +V 6 CN33 SVR3 Output Connector(CN33) : JST B6B-XH or equivalent Assignment +S: +Remote sensing -S: -Remote sensing +RC: +Remote ON/OFF -RC: -Remote ON/OFF P:Current sharing G:GND Pin No. 1 2 3 4 5 6 Mating Housing Terminal JST XHP or equivalent JST SXH-001T-P0.6 or equivalent MD-100 21mm max. 138mm GND2 60mm +V2 CN41 GND1 +V1 2 1 SVR4 SVR5 Output Connector(CN41) : JST B2B-ZR or equivalent Pin No. 1 2 Assignment +RC -RC Mating Housing JST ZHR-2 or equivalent Terminal JST SZH-002T-P0.5 or equivalent NOTE: 1.Remote ON/OFF of CN4 turn ON/OFF the entire power system 2.Remote ON/OFF of CN20,CN33,CN41,CN51 turn ON/OFF the individual output module 3.SVR1~5: DC output voltage adjustment(SVR4 for CH2 of MD-100,SVR5 for CH1 of MD-100) Static Characteristics Derating Curve Ta=25 80 RATED POWER (%) RATED POWER (%) 100 60 50 40 20 -20 100 90 85 80 70 80 0 10 20 30 40 50 AMBIENT TEMPERATURE ( ) 60 70 85 90 100 120 140 160 180 200 220 240 264 INPUT VOLTAGE (V) 60Hz File Name:MP-450,650,1K0-SPEC 2004-12-20